UPD78F0537GK-UET-A datasheet, PDF

Datasheet> All Categories > The embedded processor and controller> Microcontrollers and processors> UPD78F0537GK-UET-A

UPD78F0537GK-UET-A: DescriptionMicrocontroller, 8-Bit, FLASH, 20MHz, CMOS, PQFP64, 12 X 12 MM, LEAD FREE, PLASTIC, LQFP-64; CategoryThe embedded processor and controller Microcontrollers and processors; File Size5MB，773 Pages; ManufacturerNEC Electronics; Environmental Compliance

Download Datasheet Parametric View All

UPD78F0537GK-UET-A Overview

Microcontroller, 8-Bit, FLASH, 20MHz, CMOS, PQFP64, 12 X 12 MM, LEAD FREE, PLASTIC, LQFP-64

UPD78F0537GK-UET-A Parametric

Parameter Name	Attribute value
Is it Rohs certified?	conform to
Maker	NEC Electronics
package instruction	12 X 12 MM, LEAD FREE, PLASTIC, LQFP-64
Reach Compliance Code	compliant
Has ADC	YES
Other features	ALSO OPERATES AT 1.8V SUPPLY AT 5 MHZ
Address bus width
bit size	8
maximum clock frequency	20 MHz
DAC channel	NO
DMA channel	NO
External data bus width
JESD-30 code	S-PQFP-G64
JESD-609 code	e6/e4
length	12 mm
Number of I/O lines	55
Number of terminals	64
Maximum operating temperature	85 °C
Minimum operating temperature	-40 °C
PWM channel	YES
Package body material	PLASTIC/EPOXY
encapsulated code	LQFP
Package shape	SQUARE
Package form	FLATPACK, LOW PROFILE
Peak Reflow Temperature (Celsius)	260
Certification status	Not Qualified
ROM programmability	FLASH
Maximum seat height	1.6 mm
speed	20 MHz
Maximum supply voltage	5.5 V
Minimum supply voltage	4 V
Nominal supply voltage	5 V
surface mount	YES
technology	CMOS
Temperature level	INDUSTRIAL
Terminal surface	TIN BISMUTH/NICKEL PALLADIUM GOLD
Terminal form	GULL WING
Terminal pitch	0.65 mm
Terminal location	QUAD
Maximum time at peak reflow temperature	10
width	12 mm
uPs/uCs/peripheral integrated circuit type	MICROCONTROLLER
Base Number Matches	1

Preview

Download Datasheet

View All

User’s Manual

78K0/KE2

8-Bit Single-Chip Microcontrollers

PD78F0531

PD78F0532

PD78F0533

PD78F0534

PD78F0535

PD78F0536

PD78F0537

PD78F0537D

PD78F0531(A)

PD78F0532(A)

PD78F0533(A)

PD78F0534(A)

PD78F0535(A)

PD78F0536(A)

PD78F0537(A)

PD78F0531(A2)

PD78F0532(A2)

PD78F0533(A2)

PD78F0534(A2)

PD78F0535(A2)

PD78F0536(A2)

PD78F0537(A2)

The

PD78F0537D has an on-chip debug function.

Do not use this product for mass production because its reliability cannot be guaranteed after the on-chip debug function

has been used, due to issues with respect to the number of times the flash memory can be rewritten. NEC Electronics

does not accept complaints concerning this product.

Document No. U17260EJ6V0UD00 (6th edition)

Date Published September 2007 NS

2004

Printed in Japan

NOTES FOR CMOS DEVICES

VOLTAGE APPLICATION WAVEFORM AT INPUT PIN

Waveform distortion due to input noise or a reflected wave may cause malfunction. If the input of the

CMOS device stays in the area between V

(MAX) and V

(MIN) due to noise, etc., the device may

malfunction. Take care to prevent chattering noise from entering the device when the input level is fixed,

and also in the transition period when the input level passes through the area between V

(MAX) and

(MIN).

HANDLING OF UNUSED INPUT PINS

Unconnected CMOS device inputs can be cause of malfunction. If an input pin is unconnected, it is

possible that an internal input level may be generated due to noise, etc., causing malfunction. CMOS

devices behave differently than Bipolar or NMOS devices. Input levels of CMOS devices must be fixed

high or low by using pull-up or pull-down circuitry. Each unused pin should be connected to V

or GND

via a resistor if there is a possibility that it will be an output pin. All handling related to unused pins must

be judged separately for each device and according to related specifications governing the device.

PRECAUTION AGAINST ESD

A strong electric field, when exposed to a MOS device, can cause destruction of the gate oxide and

ultimately degrade the device operation. Steps must be taken to stop generation of static electricity as

much as possible, and quickly dissipate it when it has occurred.

Environmental control must be

adequate. When it is dry, a humidifier should be used. It is recommended to avoid using insulators that

easily build up static electricity. Semiconductor devices must be stored and transported in an anti-static

container, static shielding bag or conductive material. All test and measurement tools including work

benches and floors should be grounded.

The operator should be grounded using a wrist strap.

Semiconductor devices must not be touched with bare hands. Similar precautions need to be taken for

PW boards with mounted semiconductor devices.

STATUS BEFORE INITIALIZATION

Power-on does not necessarily define the initial status of a MOS device. Immediately after the power

source is turned ON, devices with reset functions have not yet been initialized. Hence, power-on does

not guarantee output pin levels, I/O settings or contents of registers. A device is not initialized until the

reset signal is received. A reset operation must be executed immediately after power-on for devices

with reset functions.

POWER ON/OFF SEQUENCE

In the case of a device that uses different power supplies for the internal operation and external

interface, as a rule, switch on the external power supply after switching on the internal power supply.

When switching the power supply off, as a rule, switch off the external power supply and then the

internal power supply. Use of the reverse power on/off sequences may result in the application of an

overvoltage to the internal elements of the device, causing malfunction and degradation of internal

elements due to the passage of an abnormal current.

The correct power on/off sequence must be judged separately for each device and according to related

specifications governing the device.

INPUT OF SIGNAL DURING POWER OFF STATE

Do not input signals or an I/O pull-up power supply while the device is not powered. The current

injection that results from input of such a signal or I/O pull-up power supply may cause malfunction and

the abnormal current that passes in the device at this time may cause degradation of internal elements.

Input of signals during the power off state must be judged separately for each device and according to

related specifications governing the device.

User’s Manual U17260EJ6V0UD

Caution: This product uses SuperFlash

technology licensed from Silicon Storage Technology, Inc.

•

The information in this document is current as of September, 2007. The information is subject to

change without notice. For actual design-in, refer to the latest publications of NEC Electronics data

sheets or data books, etc., for the most up-to-date specifications of NEC Electronics products. Not

all products and/or types are available in every country. Please check with an NEC Electronics sales

representative for availability and additional information.

•

No part of this document may be copied or reproduced in any form or by any means without the prior

written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may

appear in this document.

•

NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual

property rights of third parties by or arising from the use of NEC Electronics products listed in this document

or any other liability arising from the use of such products. No license, express, implied or otherwise, is

granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others.

•

Descriptions of circuits, software and other related information in this document are provided for illustrative

purposes in semiconductor product operation and application examples. The incorporation of these

circuits, software and information in the design of a customer's equipment shall be done under the full

responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by

customers or third parties arising from the use of these circuits, software and information.

•

While NEC Electronics endeavors to enhance the quality, reliability and safety of NEC Electronics products,

customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To

minimize risks of damage to property or injury (including death) to persons arising from defects in NEC

Electronics products, customers must incorporate sufficient safety measures in their design, such as

redundancy, fire-containment and anti-failure features.

•

NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and

"Specific".

The "Specific" quality grade applies only to NEC Electronics products developed based on a customer-

designated "quality assurance program" for a specific application. The recommended applications of an NEC

Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of

each NEC Electronics product before using it in a particular application.

"Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio

and visual equipment, home electronic appliances, machine tools, personal electronic equipment

and industrial robots.

"Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster

systems, anti-crime systems, safety equipment and medical equipment (not specifically designed

for life support).

"Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life

support systems and medical equipment for life support, etc.

The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC

Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications

not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to

determine NEC Electronics' willingness to support a given application.

(Note)

(1) "NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its

majority-owned subsidiaries.

(2) "NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as

defined above).

M8E 02. 11-1

User’s Manual U17260EJ6V0UD

Recommended Resources

Two-stage resistor-capacitor coupling amplifier circuit

Non-adjustable oscillation circuit composed of transistor and crystal oscillator

Voice control light circuit

Fast Schmitt Trigger Circuit

LOGO! module controls three motor starting circuits

MP3 hardware circuit schematic diagram 02

Problem of assigning initial value to timer of C51 MCU: [Ask if you don't understand] Use the 89C52 single-chip computer to make an LED light flashing effect, turning on for one second and off for one second. Now I'm stuck on assigning initial values to ti...; shaorc MCU

ZTE Hardware Written Test: ...; 至芯科技FPGA大牛 FPGA/CPLD

5G OTA testing is too complicated? - Try using simulation tools to help: In recent years, with the emergence of intelligent products and increasingly fierce competition, many terminal product manufacturers have higher and higher requirements for the indicators of their own...; eric_wang Test/Measurement

Made a power module with LM317: I started playing with digital electronics and felt that the power supply was not easy to use. I found LM317 and made a power supply module. It is simple and easy to make. If you are interested, you c...; 火辣西米秀 Analogue and Mixed Signal

STM32MP157A-DK1 Evaluation (7) M4 Core Program Test: [i=s]This post was last edited by cruelfox on 2020-4-30 00:46[/i]　　I have been playing with the Cortex-A7 core of the STM32MP157A because it is new to me. In addition to the two A7 cores, this chip is...; cruelfox Special Edition for Assessment Centres

Use Xun to create an Android emulator for the itop4418 development board: Based on Xunwei iTOP-4418 Development Department, in Eclipse, click the "Windows" menu and select "Android Virtual Device Manager" to start Simulator Management Plugin. Then click “Create…” as shown b...; 塔7呃 Embedded System

Shortcut: L0 L1 L2 L3 L4 L5 L6 L7 L8 L9 LA LB LC LD LE LF LG LH LI LJ LK LL LM LN LO LP LQ LR LS LT LU LV LW LX LY LZ M0 M1 M2 M3 M4 M5 M6 M7 M8 M9 MA MB MC MD ME MF MG MH MI MJ MK ML MM MN MO MP MQ MR MS MT MU MV MW MX MY MZ N0 N1 N2 N3 N4 N5 N6 N7 N8 NA NB NC ND NE NF NG NH NI NJ NK NL NM NN NO NP NQ NR NS NT NU NV NX NZ O0 O1 O2 O3 OA OB OC OD OE OF OG OH OI OJ OK OL OM ON OP OQ OR OS OT OV OX OY OZ P0 P1 P2 P3 P4 P5 P6 P7 P8 P9 PA PB PC PD PE PF PG PH PI PJ PK PL PM PN PO PP PQ PR PS PT PU PV PW PX PY PZ Q1 Q2 Q3 Q4 Q5 Q6 Q8 Q9 QA QB QC QE QF QG QH QK QL QM QP QR QS QT QV QW QX QY R0 R1 R2 R3 R4 R5 R6 R7 R8 R9 RA RB RC RD RE RF RG RH RI RJ RK RL RM RN RO RP RQ RR RS RT RU RV RW RX RY RZ

Popular Components