and One-Stage and Two-Stage and One-Stage and Two-Stage
Isolator
Isolator
Isolator
Isolator
Signal central wavelength,
λ
C
Signal wavelength range,
λ
S
Pump channel
wavelength range,
λ
P
Port configuration
Insertion loss at
λ
S
(note
3
)
Max.
Wavelength dependent
Max.
variation at
λ
S
and
C, L, or S bands (note
3
)
Wavelength dependent
Max.
variation at
λ
S
and
C+L band (note
3
)
PDL at
λ
S
(note
3
)
Max.
PMD at
λ
S
(note
3
)
Max.
Isolation of isolator
Min.
4
at
λ
S
(note )
Isolation of WDM
Min.
5
at
λ
P
(note )
Insertion loss (C to R) at
λ
P
Max.
PDL (C to R) at
λ
P
Max.
Directivity (P to R) at
λ
S
Min.
Directivity (R to P) at
λ
P
Min.
Optical return loss
Min.
Maximum optical
power (standard)
Maximum optical power
(high power option)
Tensile load
Max.
Operating temperature
Storage temperature
Package dimensions (D x L)
Fiber type
Pigtail color code (bare fiber)
Pigtail color code (loose tube)
Device marking
C, L or 1
C, L or 1
C, L or 1
C, L or 1
(C=1550 nm, L=1590 nm, 1=1570 nm, S=1510 nm)
C, L or S
C, L or 1
C, L or 1
C, L or 1
C, L or 1
(C=1530 to 1580 nm, L=1590±20 nm, 1=C+L=1530 to 1610nm, S=1490 to 1530 nm)
N/A
1465 to 1495 nm 1465 to 1495 nm 950 to 1010 nm
950 to 1010 nm
Backward
(note
1
)
Forward or
backward
(note
2
)
0.6 dB
0.2 dB
Forward or
backward
(note
2
)
0.6 dB
0.15 dB
Forward or
backward
(note
2
)
0.7 dB
0.2 dB
Forward or
backward
(note
2
)
See table on page 2 See table on page 2 0.5 dB
0.2 dB
0.2 dB
0.15 dB
NA
NA
0.25 dB
0.3 dB
0.25 dB
0.3 dB
0.1 dB
0.05 ps
30 dB
N/A
See table on page 2
0.05 dB
60 dB
N/A
50 dB
500 mW
2000 mW
5N
0.2 dB
0.05 ps
42 dB
N/A
See table on page 2
0.05 dB
60 dB
N/A
50 dB
500 mW
2000 mW
5N
0.06 dB
0.05 ps
30 dB
30 dB
0.4 dB
0.05 dB
60 dB
60 dB
50 dB
500 mW
2000 mW
5N
0.08 dB
0.05 ps
45 dB
30 dB
0.4 dB
0.05 dB
60 dB
60 dB
50 dB
500 mW
2000 mW
0.06 dB
0.05 ps
30 dB
30 dB
0.6 dB
0.1 dB
60 dB
60 dB
50 dB
150 mW
450 mW
0.08 dB
0.05 ps
45 dB
30 dB
0.6 dB
0.1 dB
60 dB
60 dB
50 dB
150 mW
450 mW
5N
5N
5N
-5 to 70 °C
-40 to 85 °C
5.5 mm x 32 mm for bare fiber and 5.5 mm x 40 mm for bare fiber or loose tube
PureMode Hi 1060 for ports transmitting 980 nm (standard), SMF-28 for all others (standard)
Black (C port); Clear (R & P ports)
Red (C port); Blue (R & P ports)
JDSU logo, JDSU model name and device serial number
Note: Parameters are specified for the signal wavelength range and/or pump wavelength range, all polarization states and operating temperature range without connector.
1
2.
3.
4.
5.
Backward tap: C (input), R (tap) and P (output).
Backward pumped: C (λ
S
input and
λ
P
output), R (λ
P
input) and P (λ
S
output). Forward pumped: C (λ
S
and
λ
P
output), R (λ
P
input) and P (λ
S
input).
Forward: P to C and Backward: C to P.
Forward: C to P and Backward: P to C. The isolation data are specified at 23 °C. The isolation range is
λc
± 12 nm or
λc
± 30 nm for one-stage or two-stage isolator, respectively.
Isolation of WDM is given for both C to P and P to C directions.
AHC SERIES
Ordering Information
For more information on this or other products and their availability, please contact your local JDSU account manager or
JDSU directly at 1-800-498-JDSU (5378) in North America and +800-5378-JDSU worldwide or via e-mail at
customer.service@jdsu.com.
Sample: AHC-C30R10000
AHC-
Code
C
L
S
1
Signal Wavelength
C-band
L-band
S-band
C+L-bands
Code
J
K
N
Code
0
3
5
Pump Wavelength
No pump option
1480
nm
980
nm
Q
R
S
Code
0
1
2
3
4
5
A
T
Tap Ratio
No
tap
option
1%
2%
3%
4%
5%
1.8%
10%
V
Z
Isolator, Pump Configuration,
Package Length
One-stage, forward-pumped,
32 mm (L)
One-stage, forward-pumped,
40 mm (L)
One-stage, backward-pumped or
tap,
32 mm (L)
One-stage, backward-pumped or
tap,
40 mm (L)
Two-stage, forward-pumped,
40 mm (L)
Two-stage, forward-pumped,
32 mm (L)
Two-stage, backward-pumped
(or
tap),
40 mm (L)
Two-stage, backward-pumped
(or
tap),
32 mm (L)
Code
1
2
4
5
Fiber Pigtail Length
1 meter
2 meters
0.5 meter
1.5 meters
0
Code
0
1
2
3
4
5
8
9
A
B
C
Connectors
No
connector
FC/PC
FC/SPC
FC/APC
SC/SPC
SC/APC
ST
FC/UPC
SC/UPC
LC/SPC
LC/UPC
Code
0
1
Fiber Buffer Type
250 µm bare fiber
900 µm loose
tube
Code
0
H
Power Handling Option
Standard:
150 mW at
980
nm
and 500 mW for
all others
High
Power:
450 mW at
980
nm
and 2000 mW
for all others
Note: Other configuratons and wavelengths are available on custom basis.
SMF-28 and PureMode are registered trademarks of Corning Incorporated.
ST and LC are registered trademarks of Lucent Technologies.
All statements, technical information and recommendations related to the products herein are based upon information believed to be
reliable or accurate. However, the accuracy or completeness thereof is not guaranteed, and no responsibility is assumed for any
inaccuracies. The user assumes all risks and liability whatsoever in connection with the use of a product or its application. JDSU reserves
the right to change at any time without notice the design, specifications, function, fit or form of its products described herein, including
withdrawal at any time of a product offered for sale herein. JDSU makes no representations that the products
herein are free from any intellectual property claims of others. Please contact JDSU for more information. JDSU and the JDSU logo are
The following program uses the up-counting mode. When the value increases to TA0CCR0, a TA0CCR0 interrupt will be generated. Then the counter will be automatically cleared and count again.
【Note】: Thi...
Condition: Only the MOS tube is burned out and the DS is short-circuited (all three MOS tubes are burned out. It has been working for about a month. The time varies according to the load size.) Descri...
Dear teachers, if anyone has experience in developing analog chips such as CS1256 , CSU18M91 , HT45F75 , SD6505, and has the intention of cooperation, please add jdygf2 to communicate, thank you!...
Why is a large capacitor connected in parallel with a small capacitor?
At high frequencies of the same frequency, the impedance of a large capacitor is smaller than that of a small capacitor, and it h...
[i=s]This post was last edited by w494143467 on 2021-1-31 11:58[/i]1. Introduction
I have studied FreeRTOS for a while, and basically used the official examples. Some time ago, I saw a brother on the ...
China's Rudong is building the first commercial system using 'Energy Vault' gravity energy storage technology
Energy Vault provided a dizzying array of updates in its th...[Details]
From November 13 to 15, 2024, GMCC and Welling, suppliers of system-level solutions for core components of consumer appliances
, appeared at the 2024 China Household Appliances Technology ...[Details]
Over the past decade, the domestic large-screen splicing market has gone through tests and accumulation and still maintained a good trend of rapid development. As we all know, the three maj...[Details]
According to the previous sdram code, the startup code turns off the watchdog, initializes the storage controller (mainly Norflash of BANK0 and SDRAM of BANK6), sets the stack to the highest addres...[Details]
Recent news shows that a startup developing humanoid robots has recently raised funds from major Silicon Valley companies and venture capital funds including Open, indicating that humanoid robots a...[Details]
Zoss Automotive Research Institute released the "2022-2023 China Automotive Gesture Interaction Development Research Report", which analyzes and studies four aspects: gesture interaction technology...[Details]
Against the background of the great wave of semiconductor localization, as a leading domestic semiconductor company that has been working in the MCU field for 18 years, BYD Semiconductor adheres to i...[Details]
On March 12, Yan Shengjun, Chairman of China Tianying Co., Ltd., and his delegation visited Zhangye City and reached a strategic cooperation framework agreement with the Zhangye Municipal People's ...[Details]
With the growth of global energy demand and the improvement of environmental awareness, renewable energy, especially photovoltaic storage systems, has been increasingly widely used. Photovoltaic st...[Details]
On July 17, MediaTek Dimensity 7350 chip has been released. It is built based on TSMC's second-generation 4nm process, adopts the second-generation Arm v9 architecture, and the CPU main frequency c...[Details]
FP6298 is a current control mode boost converter with pulse width modulation and built-in 80mΩ, 4.5A, 12V MOSFET. It can achieve maximum power and high conversion efficiency. Fewer peripheral compo...[Details]
OFweek Cup · OFweek 2023 China
Robot
Industry Annual Selection (abbreviated as OFweek Robot Awards 2023) is jointly organized by OFweek, China's high-tech industry portal, and its authorita...[Details]
During the die-casting production process of aluminum alloy, it is inevitable that die-casting parts will have burrs due to factors such as pressure shock and insufficient clamping force. In recent...[Details]
Mir RZ/G2L core board starts at 175 yuan! Leading the evolution of 32-bit MPU to 64-bit in the industrial market
In recent years, embedded processors based on 32-bit MPUs have been w...[Details]
Recently, Ford Electric Horse ( parameter | inquiry ) will push a new round of OTA upgrade packages to Chinese users. The map functions frequently used by users have also continued to evolve. B...[Details]
Microcontroller MCU
京公网安备 11010802033920号
EEWORLD
