-
Multi-touch capacitive touch screens have and are continuing to change the way people interact with handheld devices and bring people many new operating experiences. From mobile phones to e-books, el...[Details]
-
In September 2009, the U.S. National Institute of Standards and Technology (NIST) proposed a framework and roadmap for smart grid interoperability standards, identifying eight priority development ...[Details]
-
Introduction With the development of social economy and the continuous progress of science and technology, the temperature and humidity of the environment need to be limited in many cases. Therefore,...[Details]
-
First, the signal of the transmitter or instrument is modulated and transformed by semiconductor devices, then isolated and converted by optical or magnetic induction devices, and then demodulated ...[Details]
-
Introduction: This article gives a PIC16F1829 DATA EEPROM read and write operation example, interested friends can take a look. #define ReadRomString_CALL #define WriteRomString_CALL //************...[Details]
-
Mendix predicts: Hyper-personalization across channels will dominate innovation in 2022 ● As customers continue to pursue optimized experience, low-code will be widely used in areas beyond applica...[Details]
-
Innovations for utility applications extend beyond the hardware devices that monitor energy consumed from the grid to now provide analytics to understand meter accuracy that was previously impossible...[Details]
-
0 Introduction
CAN (Controller Area Network) is a controller area network, which belongs to the category of industrial fieldbus. Compared with general communication buses, the data communication of...[Details]
-
The P50, which was supposed to be released in February, has been delayed for various reasons and has not yet been released. Sina Digital News reported on the morning of June 24 that Qualcomm...[Details]
-
The motorcycle electronic igniter has the characteristics of sufficient high-voltage reserve, large ignition energy, high reliability, and no mechanical wear. NEC Electronics' 78K0/Kx1+ series mic...[Details]
-
Previously, we talked about how to light up an LED, including hardware circuits and programs. Today, let's talk about how to make an LED flash. There are two ways to control LED flashing with a...[Details]
-
Bandpass filters (BPF) are widely used in applications where the passband is very narrow and any other frequencies outside the passband are attenuated.
Formula (1) is the second-order bandpass ...[Details]
-
In the chip field, there is a device called a photolithography machine. It is not a money printing machine, but it is more valuable than a money printing machine. Looking around the world, only a D...[Details]
-
1. Introduction
Emergency command communication vehicles are equipped with a variety of communication equipment, such as shortwave, ultra-shortwave, and cluster radios, most of which are powered by...[Details]
-
The sub-forum on new energy storage driving future energy transformation of the 7th Hongqiao International Economic Forum was held at the National Exhibition and Convention Center (Shanghai) on Novemb...[Details]