The JDSU near infrared fused coupler splits or combines light at any selected
wavelength from 700 to 1150 nm. Designed for applications in fiber laser, sensor
and avionics applications, the coupler utilizes low loss fused fiber technology. No
light leaves the fiber and therefore no alignment is required; and there are no
unwanted reflections. Furthermore the output fiber pigtails may be directly
integrated into beam delivery systems.
NORTH AMERICA
:
800 498-JDSU (5378)
WORLDWIDE
:
+800 5378-JDSU
WEBSITE
:
www.jdsu.com
FUSED COUPLER, NEAR INFRARED
2
Configuration
1x2
P1 (Red) COMMON (Input)
P2 (Blue) SIGNAL (Input)
P3 (Red) TAP (Output)
2x2
P1 (Red) COMMON (Input)
P2 (Blue) SIGNAL (Input)
P4 (Blue)
P3 (Red) TAP (Output)
Insertion Loss
Coupling Ratio
Grade
Available Housing Option
Signal Path Insertion Loss
1, 2
(Maximum)
0.9 dB
1.1 dB
1.5 dB
1.7 dB
2.2 dB
2.4 dB
3.0 dB
3.2 dB
3.8 dB
4.0 dB
Tap Path Insertion Loss
1, 2
(Maximum)
12.2 dB
12.4 dB
8.4 dB
8.6 dB
6.4 dB
6.5 dB
4.9 dB
5.1 dB
3.8 dB
4.0 dB
10%
10%
20%
20%
30%
30%
40%
40%
50%
50%
A
B
A
B
A
B
A
B
A
B
3, 4, 5, 6
3, 4, 5, 6
3, 4, 5, 6
3, 4, 5, 6
3, 4, 5, 6
3, 4, 5, 6
3, 4, 5, 6
3, 4, 5, 6
3, 4, 5, 6
3, 4, 5, 6
1. Insertion loss at operating wavelength range (not including PDL, TDL or connector losses).
2. In 2x2 couplers with a coupling ratio of 20% or lower, insertion loss is not specified for launch through second input port (P4).
FUSED COUPLER, NEAR INFRARED
3
Housing Option
Housing Code
3
4
5
6
Description
Regular
Ø 0.9 mm slim
Ø 0.9 mm semi-ruggedized
Ø 3.0 mm fully ruggedized
1x2, 2x2 Dimensions (mm)
3.0 (Ø) x 50 (L)
3.0 (Ø) x 60 (L)
5.0 (Ø) x 75 (L)
80 (L) x 10 (W) x 8 (H)
Pigtail
Primary-coated fiber
Ø 0.9 mm loose-tube
Ø 0.9 mm loose-tube
Ø 3.0 mm fan-out sleeving
Specifications
Parameter
Operating wavelength range
1
Excess loss
Return loss/Directivity
Pigtail tensile load
Optical power handling
Operating temperature range
2
Storage temperature range
Fiber type
Grade A
Grade B
Typical
Minimum
Maximum
Maximum
Any wavelength within the 700 to 1150 nm range
0.30 dB
0.50 dB
50 dB
5N
4W
-40 to 75 °C
-40 to 85 °C
Speciality fiber
1. Any specific wavelength point from within the range 633 to 850 nm may be selected. For wavelengths outside of this range, contact JDSU with specific requirements.
2. For connectorised component, operating temperature range is -5 to 75 °C.
FUSED COUPLER, NEAR INFRARED
4
Ordering Information
For more information on this or other products and their availability, please contact your local JDSU account manager or
JDSU directly at 1-800-498-JDSU (5378) in North America and +800-5378-JDSU worldwide or via e-mail at
customer.service@jdsu.com.
Sample: FFS-060K31A10 (Fused Fiber Speciality Coupler, 1060 nm, 50/50 coupling ratio, regular housing, 1x2, A grade, 1 m
pigtails, no connectors)
FFS-
Code
7
8
9
0
1
Wavelength
(First Digit)
7xx nm
8xx nm
9xx nm
10xx nm
11xx nm
Code
A
C
E
H
K
Coupling Ratio
1
10%
20%
30%
40%
50%
Code
1
2
Configuration
1x2
2x2
Code
0
1
3
5
9
A
B
Connectors
2, 4
None
FC/PC
FC/APC
SC/APC
FC/UPC
SC/UPC
LC
5
Code
A
B
Grade
Grade A
Grade B
Code
Wavelength
(Second and
Third Digit)
Examples:
33
x33 nm
32
x32 nm
57
x57 nm
Code
3
4
5
6
Housing
2
Regular
Ø 0.9 mm slim
Ø 0.9 mm
semi-ruggedised
Ø 3.0mm fully
ruggedised
Code
0
1
Pigtail Length
3
(Minimum)
0.5 meter
1 meter
1. Other coupling ratio are available. Please contact JDSU for ordering codes of coupling ratios not listed.
2. Connectors may be fitted to housing types 4, 5 and 6. For connectorisation of housing type 3, please contact JDSU sales office.
3. Minimum pigtail length. Other pigtail lengths are available on request. When the pigtail has been modified to include a
connector, pigtail length measurment includes the connector end face.
4. Excess Loss in specification table does not include connector losses.
5. LC connector is not available for housing code 6, fully ruggedised housing.
LC is a registered trademark of Lucent Technologies.
This article is based on the Xunwei-IMX6ULL Terminator Development Board. We are very familiar with software download and installation under Windows system. In this section, we will learn about softwa...
In the 2019 National Games, the boards sponsored by TI can be roughly divided into three categories: boards based on MSP430/MSP432 microcontrollers; boards based on C2000 microcontrollers; boards base...
[i=s]This post was last edited by heyidisk on 2019-6-21 20:41[/i]Hello everyone, I haven't posted an article for a long time because I'm busy with work and a little lazy.Recently, I saw an old motherb...
In addition to introducing the topology of basic switching converters, "Switching Power Converters: Principles, Simulation, and Design of Switching Power Supplies (Original Book 2nd Edition)" also int...
Switching power supply is a kind of power supply that has been widely used in recent years. Its quality directly affects the reliability of electronic equipment. The magnetic component inductor is an ...
1Create a new Vivado projectIn this section, we will create an FPGA project using Vivado .First, we create a folder named "project" on the computer's hard disk . Note that the path name of this folder...
Huawei's He Gang released a warm-up poster yesterday for Huawei's full-scenario new product launch conference on September 10. IT Home found that these included Watch GT series smart watches, ...[Details]
For MCU programmers, in digital circuits, the role of transistors is 99.9% just to act as a "switch". I use an NPN transistor to drive a DC motor to illustrate this. See Figure 1. Figure 1 Let's...[Details]
In aerospace testing, the telemetry system is an indispensable and important component. Its main function is to measure the internal/external environmental parameters of missiles, satellites, spacecra...[Details]
Taking the blinking LED as an example, this article explains how to create a new project and configure project options.
Key points: 1) What does $PROJ_DIR$ represent?
2) Find the librari...[Details]
Interaction is still necessary, and the interaction efficiency using keyboard and display is still very high. Of course, you can directly use UART for character input and output. But why waste the fu...[Details]
The current LSI digital signal processor series provides industry-leading signal processing performance while maintaining efficient software code density, low power consumption and small size.
DS...[Details]
The popularity of gas (artificial gas, natural gas, liquefied petroleum gas) has improved production efficiency and the quality of life of citizens. However, in the process of using gas, accidents ...[Details]
In signal transmission, BCH code is widely used in microcomputer-level communication due to its unique advantages. However, due to its complex algorithm, it is usually only used in dynamic and real...[Details]
Combination of photosensitive sensor and LED lamp
Wind and solar LED street lights are highly intelligent and unattended road lighting fixtures that use wind and sunlight to generate electrici...[Details]
On August 31, a small polymer lithium battery production base and sales headquarters project with a total investment of 50 million US dollars was settled in Nantong Development Zone. Wang Wenxian, mem...[Details]
According to Reuters, the United States has persuaded Italy and other European allies to ban Huawei equipment on the grounds of security risks, but Italy has not taken action against Huawei so far. H...[Details]
According to Macrumors, Apple today officially released the first public beta version of the macOS 11 Big Sur update. Testers participating in the Apple Beta testing program can download macOS Big Su...[Details]
introduction With the continuous development of fully automatic embroidery machines, mechanical improvements have not had much effect on improving the performance of the machines. Therefore, the cont...[Details]
On October 24, 2024, at the CATL Super Hybrid Battery Brand and New Product Launch Conference, the Xiaoyao Super Hybrid Battery was officially unveiled. This is the world's first hybrid battery wit...[Details]
Embedded System
京公网安备 11010802033920号
EEWORLD
