-
Oscilloscopes are an indispensable tool for anyone designing, building, or repairing electronic equipment. In today's fast-paced world, engineers need the best tools available to quickly and accurat...[Details]
-
Aiming at the shortcomings of low efficiency and subjective influence of manual testing, an automatic test system for HDTV main control board based on LabVIEW was designed. The audio and video image ...[Details]
-
Mobile power, as the backup power of many mobile devices, has also attracted much attention for its battery life. What is the right capacity? A capacity that is too small is not enough, and a capac...[Details]
-
C8051F --- Oscillator Q: Is the internal clock oscillator stable? Can it be used to generate the baud rate time base? A: The accuracy of the internal clock oscillator of different devices is differe...[Details]
-
Recently, I need to use door magnetic in my project, and I use STM8L051 chip. When using button battery, it is necessary to have low power consumption and energy saving. First, let’s look at the lo...[Details]
-
1 Introduction
With the massive increase of new loads and nonlinear loads in the power system, the voltage and current waveforms of the power system will be seriously distorted, thu...[Details]
-
The electrolyzer has positive and negative poles. Generally, the one with a longer pin is the positive pole and the one with a shorter pin is the negative pole, and they are marked with "1". When t...[Details]
-
Recently,
Gasgoo Automotive Research Institute
released a list of smart cockpit configuration data from January to July 2024, showing the fierce competition among cockpit configuration supp...[Details]
-
Recently, the new headquarters of Universal
Robots
and Mir, both subsidiaries of Teradyne Group, were completed.
As the world's leading
provider of
collaborative robots
and auto...[Details]
-
According to Jiwei.com, Reuters reported that Philips said on the 25th that it would sell its home appliance business to Hillhouse Capital for 3.7 billion euros. Philips said last year it planned to ...[Details]
-
1 Introduction Microcontrollers generally have internal ROM/EEPROM/FLASH for users to store programs. In order to prevent unauthorized access or copying of the program in the microcontroller, most ...[Details]
-
1. Design Features
1. Constant current output is very suitable for driving
LEDs
2. High output voltage supports one LED string, so there is no need to consider current distribut...[Details]
-
I have read many articles about configuring filters and setting IDs (StdID ExtID), but found that they all have problems. After my own experimental tests, the results are as follows: (1) Set ID ...[Details]
-
Industrial sites often need to isolate RS-232 and RS-485 at the same time. Usually, two isolated DC-DCs are used with a separate signal isolation circuit. However, the isolation performance varies an...[Details]
-
On November 11, ON Semiconductor, a company specializing in smart power and smart sensing technologies, announced the launch of the Treo Platform, an analog and mixed-signal platform built on an ad...[Details]