(1) The Zener impedance is derived from the 1KHZ AC volt age which results when an AC current having an RMS value equal to 10% of the Zener current (IZTor IZK)
is superim posed on IZT or IZK. Zener impedance is m easured at two points to insure a sharp knee on the breakdown curve and to eliminate unstable units.
(2) Valid provided that electrodes at a distance of 10mm from case are kept at ambient temperature.
(3) Tested under thermal equilibrium and DC test conditions.
REV:B
QW-BZ010
Page 2
Surface Mount Zener Diodes
SMD Diodes Specialist
RATING AND CHARACTERISTIC CURVES (CZRL5225-G Thru. CZRL5267-G)
This article mainly shares the process of getting familiar with the code. Only by understanding the official application engineering can you port the application functions to other platforms with cert...
micro-gui is a replacement for nano-gui , both are portable between hosts and both use the same display driver, providing portability to a range of displays.nano-gui only provides display functionalit...
In-car entertainment network, after Ethernet AVB, MOST, etc.
A2B has appeared. Friends on the entertainment network should search on Baidu.https://www.analog.com/cn/landing-pages/001/a2b.html...
Wireless communications and radar systems are seeing an increasing demand on antenna architectures to improve performance. Many new applications are only possible with antennas that consume less power...