P5KE5.0 thru P5KE170CA, e3
500 W TRANSIENT VOLTAGE
SUPPRESSOR
SCOTTSDALE DIVISION
DESCRIPTION
This P5KE series is an economical 500 W Transient Voltage Suppressor
(TVS) for protecting voltage-sensitive components from destruction or
degradation.
It is available in both unidirectional and bi-directional
configurations as well as RoHS Compliant (annealed matte-Tin Finish) with
an e3 suffix added to the part number. The response time of their clamping
action is virtually instantaneous. As a result, they may also be used
effectively for protection from ESD or EFT per IEC61000-4-2 and IEC61000-
4-4 or for inductive switching environments and induced RF. They can also
be used for protecting other sensitive components from secondary lightning
effects per IEC61000-4-5 and class levels defined herein. Microsemi also
offers numerous other TVS products to meet higher and lower power
demands and special applications.
IMPORTANT:
For the most current data, consult
MICROSEMI’s
website:
http://www.microsemi.com
APPEARANCE
DO-41
(DO-204AL)
WWW .
Microsemi
.C
OM
FEATURES
•
•
•
Available in both unidirectional and bidirectional
(add C or CA suffix to part number for bidirectional)
Suppresses transients up to 500 watts @ 10/1000 µs
Optional 100%
screening for avionics grade
is
available by adding MA prefix to part number for added
100% temperature cycle -55
o
C to +125
o
C (10X) as well
as surge (3X) and 24 hours HTRB with post test V
Z
&
I
R
(in the operating direction for unidirectional or both
directions for bidirectional)
Options for screening in accordance with MIL-PRF-
19500 for JAN, JANTX, JANTXV, and JANS are also
available by adding MQ, MX, MV, or MSP prefixes
respectively to part numbers.
Surface mount equivalents available as SMAJ5.0 to
SMAJ170CA (consult factory for other surface mount
options)
Moisture classification is Level 1 with no dry pack
required per IPC/JEDEC J-STD-020B
RoHS Compliant devices available by adding “e3” suffix
•
•
•
•
•
•
•
•
APPLICATIONS / BENEFITS
Protects sensitive components such as IC’s,
2
CMOS, Bipolar, BiCMOS, ECL, DTL, T L, etc.
Selections for 5.0 to 170 V standoff voltage (V
WM
)
Economical series for thru-hole mounting
Similar to SA5.0 thru SA170 series
Protection from switching transients & induced RF
Fast response
Compliant to IEC61000-4-2 and IEC61000-4-4 for
ESD and EFT protection respectively
Secondary lightning protection per IEC61000-4-5
with 42 Ohms source impedance:
Class 1: P5KE5.0 to P5KE120A or CA
Class 2: P5KE5.0 to P5KE60A or CA
Class 3: P5KE5.0 to P5KE30A or CA
Class 4: P5KE5.0 to P5KE15A or CA
Secondary lightning protection per IEC61000-4-5
with 12 Ohms source impedance:
Class 1: P5KE5.0 to P5KE36A or CA
Class 2: P5KE5.0 to P5KE18A or CA
•
•
•
•
•
MAXIMUM RATINGS
•
Operating and Storage Temperature: -65°C to +150°C
•
Peak Pulse Power: 500 Watts at 10/1000
μs
(see Figure
1, 2 and 3 for t
W
, waveform and derating effects)
•
Impulse repetition rate (duty factor): 0.01%
•
Thermal Resistance: 45°C/W junction to leads @ 3/8
inch (10 mm) from body, or 105°C/W junction to ambient
when mounted on FR4 PC board with 4 mm
2
copper
pads (1 oz) and track width 1 mm, length 25 mm
•
Steady-State Power: 2.77 Watts @ T
L
=25°C at 3/8 inch
º
(10 mm) from body, or 1.19 W at T
A
= 25 C on FR4 PC
board described for thermal resistance
•
Forward Voltage at 25°C: 3.5 V @ 30 A with 8.3 ms
half-sine wave (unidirectional only)
•
Solder temperatures: 260
°C
for 10 s (maximum)
Copyright
©
2005
8-04-2005 REV D
MECHANICAL AND PACKAGING
•
•
Void-free transfer molded thermosetting epoxy body
meeting UL94V-0
FINISH: Tin-Lead or RoHS Compliant annealed
matte-Tin plating readily solderable per MIL-STD-
750, method 2026
MARKING: Body marked with part number
POLARITY: Band denotes cathode. Bidirectional
not marked
WEIGHT: 0.3 grams (approximate)
TAPE & REEL option: Standard per EIA-296 (add
“TR” suffix to part number)
See package dimensions on last page
P5KE5.0 thru 170CA
•
•
•
•
•
Microsemi
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
Page 1