[i=s]This post was last edited by EETUX on 2018-7-6 10:08[/i] Because the symbol table is needed, first recompile the micropython firmware and modify the makefile to remove the -fdata-sections -ffunct...
[size=3]There are four types of interrupts on the CPU.[/size]
[size=3]
[/size]
[size=3]
[/size]
[size=3] Reset[/size]
[size=3]
[/size]
[size=3]
[/size]
[size=3] Maskable[/size]
[size=3]
[/size]
[size=...
Emergency help: LMK03806B can output normally sometimes, but not normally? LMK03806 chip is configured by Xilinx K7 FPGA, and the circuit reference manual is used. However, the input part does not hav...
Experiment name: Preisach type hysteresis nonlinear modeling and inverse control based on hyperbolic function
Experimental content:
Drivers made of smart materials such as piezoelectric ceramics and m...
[color=#333333][font=微软雅黑][size=18px]For the setting of the startup program of the development board, you can do this: Connect to the development board through the serial port[/size][/font][/color] [c...
In the previous article, we used BusyBox to build a basic root file system for an embedded Linux system . The basic functions can run normally, but there are still many areas that need to be improved ...