Basic information of TLV2434AIPW amplifier:
TLV2434AIPW is an OPERATIONAL AMPLIFIER. Commonly used packaging methods are PLASTIC, TSSOP-14
TLV2434AIPW amplifier core information:
The minimum operating temperature of the TLV2434AIPW is -40 °C and the maximum operating temperature is 125 °C. Its peak reflow temperature is 220°C and its maximum average bias current is 0.00015 µA
How to simply check the efficiency of an amplifier? Looking at its slew rate, the TLV2434AIPW has a nominal slew rate of 0.25 V/us. The manufacturer specifies a maximum slew rate of 0.5 mA for the TLV2434AIPW and a minimum slew rate of 0.1 V/us. Its minimum voltage gain is 1000. When the op amp is used in closed loop, at a certain closed-loop gain (usually 1 or 2, 10, etc.), the frequency when the TLV2434AIPW gain becomes 0.707 times the low-frequency gain is 500 kHz.
The nominal supply voltage of the TLV2434AIPW is 3 V. The power supply range is: 3/5 V. The input offset voltage of the TLV2434AIPW is 1500 µV (input offset voltage: the compensation voltage added between the two input terminals to make the output terminal of the operational amplifier 0V (or close to 0V).)
Related dimensions of TLV2434AIPW:
The width of TLV2434AIPW is: 4.4 mm and the length is 5 mm. TLV2434AIPW has 14 terminals. Its terminal position type is: DUAL. Terminal pitch is 0.65 mm. Total pins: 14
TLV2434AIPW amplifier additional information:
TLV2434AIPW adopts the VOLTAGE-FEEDBACK architecture. It belongs to the low-bias class of amplifiers. It does not belong to the low offset class of amplifiers. The frequency compensation status of TLV2434AIPW is: YES. Its temperature grade is: AUTOMOTIVE.
And its humidity sensitivity level is: 1. TLV2434AIPW is not Rohs certified. The corresponding JESD-30 code is: R-PDSO-G14. The corresponding JESD-609 code is: e4. The packaging code of TLV2434AIPW is: TSSOP.
The materials used in the TLV2434AIPW package are mostly PLASTIC/EPOXY. The package shape is RECTANGULAR. TLV2434AIPW package pin forms are: SMALL OUTLINE, THIN PROFILE, SHRINK PITCH. Its terminal forms are: GULL WING. The maximum seat height is 1.2 mm.
Basic information of TLV2434AIPW amplifier:
TLV2434AIPW is an OPERATIONAL AMPLIFIER. Commonly used packaging methods are PLASTIC, TSSOP-14
TLV2434AIPW amplifier core information:
The minimum operating temperature of the TLV2434AIPW is -40 °C and the maximum operating temperature is 125 °C. Its peak reflow temperature is 220°C and its maximum average bias current is 0.00015 µA
How to simply check the efficiency of an amplifier? Looking at its slew rate, the TLV2434AIPW has a nominal slew rate of 0.25 V/us. The manufacturer specifies a maximum slew rate of 0.5 mA for the TLV2434AIPW and a minimum slew rate of 0.1 V/us. Its minimum voltage gain is 1000. When the op amp is used in closed loop, at a certain closed-loop gain (usually 1 or 2, 10, etc.), the frequency when the TLV2434AIPW gain becomes 0.707 times the low-frequency gain is 500 kHz.
The nominal supply voltage of the TLV2434AIPW is 3 V. The power supply range is: 3/5 V. The input offset voltage of the TLV2434AIPW is 1500 µV (input offset voltage: the compensation voltage added between the two input terminals to make the output terminal of the operational amplifier 0V (or close to 0V).)
Related dimensions of TLV2434AIPW:
The width of TLV2434AIPW is: 4.4 mm and the length is 5 mm. TLV2434AIPW has 14 terminals. Its terminal position type is: DUAL. Terminal pitch is 0.65 mm. Total pins: 14
TLV2434AIPW amplifier additional information:
TLV2434AIPW adopts the VOLTAGE-FEEDBACK architecture. It belongs to the low-bias class of amplifiers. It does not belong to the low offset class of amplifiers. The frequency compensation status of TLV2434AIPW is: YES. Its temperature grade is: AUTOMOTIVE.
And its humidity sensitivity level is: 1. TLV2434AIPW is not Rohs certified. The corresponding JESD-30 code is: R-PDSO-G14. The corresponding JESD-609 code is: e4. The packaging code of TLV2434AIPW is: TSSOP.
The materials used in the TLV2434AIPW package are mostly PLASTIC/EPOXY. The package shape is RECTANGULAR. TLV2434AIPW package pin forms are: SMALL OUTLINE, THIN PROFILE, SHRINK PITCH. Its terminal forms are: GULL WING. The maximum seat height is 1.2 mm.
| Parameter Name | Attribute value |
| Is it Rohs certified? | incompatible |
| Parts packaging code | TSSOP |
| package instruction | PLASTIC, TSSOP-14 |
| Contacts | 14 |
| Reach Compliance Code | compliant |
| ECCN code | EAR99 |
| Amplifier type | OPERATIONAL AMPLIFIER |
| Architecture | VOLTAGE-FEEDBACK |
| Maximum average bias current (IIB) | 0.00015 µA |
| Nominal Common Mode Rejection Ratio | 83 dB |
| frequency compensation | YES |
| Maximum input offset voltage | 1500 µV |
| JESD-30 code | R-PDSO-G14 |
| JESD-609 code | e4 |
| length | 5 mm |
| low-bias | YES |
| low-dissonance | NO |
| Humidity sensitivity level | 1 |
| Number of functions | 4 |
| Number of terminals | 14 |
| Maximum operating temperature | 125 °C |
| Minimum operating temperature | -40 °C |
| Package body material | PLASTIC/EPOXY |
| encapsulated code | TSSOP |
| Encapsulate equivalent code | TSSOP14,.25 |
| Package shape | RECTANGULAR |
| Package form | SMALL OUTLINE, THIN PROFILE, SHRINK PITCH |
| method of packing | TAPE AND REEL |
| Peak Reflow Temperature (Celsius) | 220 |
| power supply | 3/5 V |
| Certification status | Not Qualified |
| Maximum seat height | 1.2 mm |
| minimum slew rate | 0.1 V/us |
| Nominal slew rate | 0.25 V/us |
| Maximum slew rate | 0.5 mA |
| Supply voltage upper limit | 12 V |
| Nominal supply voltage (Vsup) | 3 V |
| surface mount | YES |
| technology | CMOS |
| Temperature level | AUTOMOTIVE |
| Terminal surface | NICKEL PALLADIUM GOLD |
| Terminal form | GULL WING |
| Terminal pitch | 0.65 mm |
| Terminal location | DUAL |
| Maximum time at peak reflow temperature | NOT SPECIFIED |
| Nominal Uniform Gain Bandwidth | 500 kHz |
| Minimum voltage gain | 1000 |
| width | 4.4 mm |
| Base Number Matches | 1 |
EEWorld
subscription
account
EEWorld
service
account
Automotive
development
circle
京公网安备 11010802033920号
EEWORLD