Laser beam fully automatic door and window control circuit
Source: InternetPublisher:ohahaha Keywords: control circuit laser LED Updated: 2020/09/14
Operating principle of circuit T: In this circuit, laser diode LED is used as the light emitter
. In addition, other light emitters with similar performance can also be used to replace the laser diode
. Resistor R. and diode VD, as the overcurrent protection circuit of the laser diode, and multi-
turn trimmer potentiometer RP, used to adjust the sensitivity of the laser. Under normal circumstances, when the laser
beam irradiates the phototransistor VT. When on, VTz is turned on, making the base potential of VT3 zero
(VL zero bias), VT3 is turned off, and its emitter potential is zero. This zero potential is added to IC.
(CD4001) The input terminal of the first gate N, the result N. The output is high level.
This high level is added to the base of transistor VT4 through the resistor, causing VT4 to conduct and
the green LED to light up. At this time, the circuit is in a waiting standby state.
- CD4017 simple doorbell
- Binary clock design based on FPGA
- How to build a self-driving drone
- Smart car control system circuit design strategy
- Homemade disinfectant circuit
- Micro infrared receiver module PIC-12043S circuit diagram
- RF leak detector circuit diagram
- Electronically controlled fuel injector test circuit
- Light controlled electronic bird circuit
- Cadillac seat memory circuit diagram
- SG1524 driver LED circuit
- Detailed explanation of ambulance electronic flash signal circuit diagram
- Ordinary optocoupler isolation circuit
- Level display circuit diagram composed of LED level meter driver integrated circuit
- Positive terminal buck/boost LED constant current drive circuit diagram
- Wall wire detection circuit
- Electric blanket internal disconnection measurement circuit
- Light controlled night light lighting circuit
- LED indicator integrated circuit
- Eight-way light-touch electronic interlock switch circuit
京公网安备 11010802033920号