Thermal Shock ..................................................... -40 °C to +85 °C, 10 times .................................... ±10 % typical resistance change
Solvent Resistance ............................................... MIL-STD-202, Method 215 ................................... No change
Vibration ............................................................... MIL-STD-883C, Method 2007.1,........................... No change
Test Procedures And Requirements For Model MF-RX Series
Test
Test Conditions
Accept/Reject Criteria
Visual/Mech. ......................................................... Verify dimensions and materials ........................... Per MF physical description
Resistance ............................................................ In still air @ 23 °C ................................................. Rmin
≤
R
≤
Rmax
Time to Trip ........................................................... 5 times Ihold, Vmax, 23 °C ................................... T
≤
max. time to trip (seconds)
Hold Current ......................................................... 30 min. at Ihold ..................................................... No trip
Trip Cycle Life ....................................................... Vmax, Imax, 100 cycles ........................................ No arcing or burning
Trip Endurance ..................................................... Vmax, 48 hours..................................................... No arcing or burning
UL File Number .....................................................E174545
http://www.ul.com/ Follow link to Online Certificates Directory, then enter UL File No.
* RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011.
** Bourns follows the prevailing definition of “halogen free” in the industry. Bourns considers a product to be “halogen free” if (a) the Bromine (Br) content is 900 ppm or less;
(b) the Chlorine (Cl) content is 900 ppm or less; and (c) the total Bromine (Br) and Chlorine (Cl) content is 1500 ppm or less.
Specifications are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specific applications.
Ro VE LEA
HS RS D
C ION FRE
OM S E
PL AR
IA E
NT
*
Additional Features
n
Bulk packaging, tape and reel and Ammo-
Applications
Almost anywhere there is a low voltage power
supply, up to 60 V and a load to be protected,
including:
n
Security and fire alarm systems
n
Loud speakers
n
Power transformers
Pak available on most models
n
Resettable circuit protection
MF-RX Series - PTC Resettable Fuses
Product Dimensions
Model
MF-RX110
MF-RX135
MF-RX160
MF-RX185
MF-RX250
MF-RX300
MF-RX375
A
Max.
13.0
(0.512)
14.5
(0.571)
16.3
(0.642)
17.8
(0.701)
21.3
(0.839)
24.9
(0.980)
28.4
(1.118)
B
Max.
18.0
(0.709)
19.6
(0.772)
21.3
(0.839)
22.9
(0.902)
26.4
(1.039)
30.0
(1.181)
33.5
(1.319)
C
Nom.
5.1
(0.201)
5.1
(0.201)
5.1
(0.201)
5.1
(0.201)
10.2
(0.402)
10.2
(0.402)
10.2
(0.402)
Tol. ±
0.7
(0.028)
0.7
(0.028)
0.7
(0.028)
0.7
(0.028)
0.7
(0.028)
0.7
(0.028)
0.7
(0.028)
D
Min.
7.6
(0.299)
7.6
(0.299)
7.6
(0.299)
7.6
(0.299)
7.6
(0.299)
7.6
(0.299)
7.6
(0.299)
E
Max.
3.1
(0.122)
3.1
(0.122)
3.1
(0.122)
3.1
(0.122)
3.1
(0.122)
3.1
(0.122)
3.1
(0.122)
Physical Characteristics
Style
1
1
1
1
1
1
1
0.81 (20AWG)
Lead Dia.
0.81
(0.032)
0.81
(0.032)
0.81
(0.032)
0.81
(0.032)
0.81
(0.032)
0.81
(0.032)
0.81
(0.032)
Material
Sn/Cu
Sn/Cu
Sn/Cu
Sn/Cu
Sn/Cu
Sn/Cu
Sn/Cu
Packaging options:
BULK: All models = 500 pcs. per bag.
TAPE & REEL: MF-RX110 – MF-RX160 = 1500 pcs. per reel; MF-RX185 – MF-RX375 = 1000 pcs. per reel
AMMO-PACK: MF-RX110 – MF-RX160 = 1000 pcs. per reel; MF-RX185 – MF-RX375 = 500 pcs. per reel
Package 1
A
E
How to Order
Typical Time to Trip at 23 ˚C
MF
-R
MF X110
-R
MF X135
-R
MF X160
-R
MF X185
-R
MF X250
-R
MF X300
-RX
375
1000
100
MF - RX 110 - 0 - 99
B
Multifuse
®
Product Designator
D
Hold Current, Ihold
110-375 (1.10 Amps - 3.75 Amps)
Series
RX = Radial Leaded Component
C
NOTE: Kinked lead option is available for
board standoff. Contact factory for details.
Typical Part Marking
Represents total content. Layout may vary.
PART
IDENTIFICATION
DATE CODE
(FIRST DIGIT =
LAST DIGIT OF YEAR;
NEXT THREE DIGITS =
DAY OF YEAR)
MANUFACTURER'S
TRADEMARK
RX110
7180T
LOT NO.
(T = TAIWAN
S = CHINA)
Packaging Options
- __ =
Bulk Packaging without part
number suffix option
- 0-99 = Bulk Packaging with part
number suffix option
-2=
Tape and Reel without part
number suffix option*
- 2-99 = Tape and Reel with part number
suffix option*
- AP = Ammo-Pak*
- 0-14 = Kinked leads where straight
leads are standard
- 0-17 = Straight leads where kinked
leads are standard
Time to Trip (Seconds)
10
1
0.1
Part Number Suffix Option
- 99 =
RoHS Compliancy
As of date code April 1, 2005 all
MF-RX models are RoHS compliant.
The suffix “-99” can be used if a new
part number is required to reference
the RoHS compliance,
but including
the “-99” suffix option is not
recommended for new designs.
*Packaged per EIA486-B
0.01
0.001
1
10
100
Fault Current (Amps)
MF-RX SERIES, REV. S, 10/17
Specifications are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specific applications.
MF-R, MF-R/90, MF-R/600, & MF-RX, & MF-RX/72 Series
Tape and Reel Specifications
Devices taped using EIA468–B/IEC286-2 standards. See table below and Figures 1 and 2 for details.
Specifications are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specific applications.
max.
-0.5/+0.75
(-0.02/+0.03)
±0.2
(±.0078)
±3.0
(±.118)
±0.5
(±.02)
max.
max.
max.
max.
max.
max.
max.
max.
MF-R, MF-R/90, MF-R/600, MF-RX, & MF-RX/72 Series
Tape and Reel Specifications
IEC
Mark
F
w
d
W1
f
h
h
EIA
Mark
F
W2
a
h
c
n
n
Dimensions
Dimensions
Tolerance
5.08
±0.2
(0.2)
(±0.008)
56.0
max.
(2.205)
370.0
max.
(14.57)
4.75
±3.25
(.187)
(±.128)
26.0
±12.0
(1.024)
(±.472)
80
max.
(3.15)
91
max.
(3.58)
62
355
345
nom.
(2.44) (14.0) (13.6)
64
372
362
max.
(2.52) (14.6) (14.25)
p
Dimension Description
Lead spacing: MF-R, MF-R/90, MF-R/600, MF-RX, MF-RX/72
Reel width
Reel diameter
Space between flanges less device
Arbor hole diameter
Core diameter: MF-R, MF-RX, MF-R/90
Core diameter: MF-R/600
Box: MF-R, MF-RX, MF-R/90
Box: MF-R/600
h
h
Consecutive missing places: MF-R, MF-RX, MF-R/90
3
p
max.
Consecutive missing places: MF-R/600
Empty places per reel: MF-R, MF-RX, MF-R/90
Empty places per reel: MF-R/600
H
1
P
1
A
none
Reference plane
F
L
B
H
0
W
0
W
1
W
p
I
2
p
H
Not specified
H
1
0.1 %
Taped Component Dimensions -
Figure 1
h
h
I
1
P
1
P
0
D
0
Reference plane
F
User direction of feed
Cross section A - B
H
1
H
H
1
L
A
B
H
0
W
0
W
1
W
t
I
2
I
1
P
0
D
0
User direction of feed
Cross section A - B
Reel Dimensions - Figure 2
t
Reel
h
d
f
Reel
h
MM
DIMENSIONS:
(INCHES)
User
direction
of
feed
Upper side
Tape
Lower side
Upper side
Tape
Specifications are subject to change without notice.
User
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
d
direction
Users should verify actual device performance in their specific applications.
Application of Multi-function Oscilloscope in Inverter Analysis and Measurement General inverter uses industrial frequency AC to rectify into DC, and then inverts DC into three-phase AC with continuou...
[size=4] [md]## Preface In the previous article, we simulated speed data through light sensor data, and used online IDE to complete data collection and synchronous display. We experienced the quick de...
Reward post, asking for help from the big guys hidden in the forum, is there any big guy who has a sufficient level of DSP and can teach and solve related problems? It is equivalent to hiring a master...
We can see various capacitors in the power supply filter circuit, with different capacitance values of 100uF, 10uF, 100nF, and 10nF. So how are these parameters determined?For digital circuits to run ...
my country's first megawatt-class wind turbine was successfully developed in Lanzhou 03-02Xinhua News AgencyThe reporter learned from Lanzhou Electric Motor Co., Ltd. that the first megawatt-class var...
Xiaomi is becoming more and more popular, and many of its products are loved by users. Not long ago, Xiaomi launched a new smart driving recorder - Xiaomi Mijia Smart Rearview Mirror. As a well-known ...
At present, small speed control devices with low requirements, such as plotters, use thyristor phase control to supply DC motors. Dual base transistors are also used to generate pulses. It is now...[Details]
The PicoScope 9404 has four high-bandwidth 50Ω input channels with fine time and voltage resolution, display and accurate measurement conversion speeds up to 70ps for accurate measurement and visuali...[Details]
On May 16, according to an announcement released on the website of the State Administration for Market Regulation, Tesla (Shanghai) Co., Ltd. recently filed a recall plan with the State Administratio...[Details]
A single-chip microcomputer is a single-chip microcomputer that integrates the main functional components of a microcomputer on a single chip. If you say that a single-chip microcomputer is a compute...[Details]
Robotic arms have proven to be very useful and more efficient in many applications that require speed, accuracy, and safety. But more importantly for me, these things look cool while they work. I h...[Details]
"The ubiquitous power Internet of Things is tasked with breaking down traditional energy barriers and represents a huge transformation for power grid companies in terms of concepts, technologies, a...[Details]
introduction
Wafer-level reliability (WLR) testing was first proposed as a testing method to achieve built-in reliability (BIR). The most essential feature of wafer-level reliability testing is ...[Details]
According to foreign media reports, a South Korean research team has developed a thermoelectric material that can be used in wearable devices such as smart clothing and can maintain stable thermal ...[Details]
1.
LED driver
General requirements
The arrangement of
LEDs
and the specifications of
LED light sources
determine the basic
driver
requirements. The main function ...[Details]
Abstract: This paper analyzes the basic principles of fiber Bragg grating sensing, and specifically verifies the relationship between wavelength change and temperature in a dam simulation slot test...[Details]
With various high-end, precision With the massive increase in equipment and the development of industrial production towards refinement, higher and higher requirements are placed on the quality of ...[Details]
Application of ISPl362 in infrared imaging system based on FPGA
Abstract: ISP1362 is a USB programmable control chip launched by Philips. It integrates an advanced host controller and a pe...[Details]
On the morning of February 23, the foreign streaming platform Netflix stated that it has not yet tested support for the spatial audio function of Apple headphones. A Netflix spokesperson said...[Details]
As people's living standards continue to improve, the aging of my country's population is becoming more and more obvious. Vacuum cleaning robots, as a type of service robot, can replace people in p...[Details]
0 Introduction
A mobile robot is a comprehensive system that can sense the external environment, make dynamic decisions and plans in an environment with obstacles, and complete various functi...[Details]
Test/Measurement
京公网安备 11010802033920号
EEWORLD
