RF-18 (Rev 28JUN18)
RF405–00SJ7–00SJ7–0500
RF405–01SP1–01RP1–0500
RF405 SERIES
50
W
.086" DIA SEMI-FLEXIBLE CABLE
SPECIFICATIONS
For complete specifications
see www.samtec.com?RF405
Mates with:
SMA, SMP
Hand-formable
semi-flexible cable
RF Connector:
Shell Material:
Brass (SMA),
Au plated BeCu (SMP)
Contact Material:
Brass (SMA),
Au plated BeCu (SMP)
Impedance:
50
W
Frequency Range:
DC to 20 GHz
Dielectric Withstanding:
1,000 Vrms (SMA),
500 Vrms min (SMP)
Solutionator
DESIGN IN A MINUTE
®
(2.18 mm)
.086" DIA cable
RG 405 (.086")
Cable:
• Create a full system:
cable assembly and board level mates,
50
W
and 75
W
solutions
• Free samples available
• Visit: rf.samtec.com
Impedance:
50
W
microwave
Capacitance:
104.97 pF/meter
Max Attenuation
(cable only):
0.72 @ 1 GHz for 1 meter
Conductor Size:
24 AWG (0.56 mm) .022" dia.
Conductor Material:
Silver plated copper clad steel
Insulator Material:
PTFE
Shield Material:
Tinned Copper
Bend Radius:
3.18 mm
RoHS Compliant:
Yes
Choice of SMA or
SMP terminations
CABLE TYPE
END 1
CONNECTOR
END 2
CONNECTOR
OVERALL LENGTH
= (2.18 mm) .086" DIA
24 AWG Semi-flexible
coax cable
RF405
Specify
END OPTIONS
from chart
= Overall Length in millimeters
–0100 (100 mm) 3.94" minimum
–“XXXX”
ALSO AVAILABLE
(MOQ Required)
• Additional stripping
and tinning options
–01SP1–01RP1 SHOWN
STRIPPED & TINNED
(Dimensions in mm)
CALLOUT A
–3030
3.0
–4030
4.0
–4040
4.0
B
3.0
3.0
4.0
XXXX = OAL (millimeters)
OTHER
SOLUTIONS
• Cable connector kits
(see cable components
catalog pages)
Both center conductor and braid
shield are stripped, only the
center conductor is tinned.
END OPTIONS
–01SP1 = SMA
Straight Plug
(30 µ" (0.76 µm) Gold on
Center Contact,
Gold Flash on Shell)
–00SJ7 = SMP
Straight Jack
(10 µ" (0.25 µm) Gold on
Center Contact,
Gold Flash on Shell)
–00RJ7 = SMP
Right-angle Jack
(10 µ" (0.25 µm) Gold on
Center Contact,
Gold Flash on Shell)
XXXX =
Stripped & Tinned
(End 2 callout)
END OPTIONS
–01RP1 = SMA
Right-angle Plug
(30 µ" (0.76 µm) Gold on
Center Contact,
Gold Flash on Shell)
B
A
Note:
Cable lengths longer than
(1000 mm) 39.40" are not
supported with S.I. test data.
Due to technical progress, all designs, specifications and components are subject to change without notice.
All parts within this catalog are built to Samtec’s specifications.
Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply.
WWW.SAMTEC.COM
MCU
京公网安备 11010802033920号
EEWORLD
