SmartPro 120V 1kVA 750W Medical-Grade Line-
Interactive Tower UPS with 4 Outlets, Full
Isolation, USB, Lithium Battery
MODEL NUMBER:
SMART1200XLHGL
Highlights
q
28 min. runtime at half load; 10
min. at full load
q
Reduces cumulative leakage
current to under 100 A
q
Floating AC output prevents
noise coupling
q
940 joules of surge protection
10,000-cycle LiFePhos battery
q
Package Includes
q
SMART1200XLHGL
1kVA/750W Medical-Grade
Tower UPS System
q
USB monitoring cable, 6 ft.
DB9 serial monitoring cable, 6 ft.
5 yr. warranty on UPS and
batteries
q
q
Provides UL 60601-1 compliant, medical-grade 1kVA/750W power backup, ideal for use in patient-care
vicinities. Lithium Iron Phosphate batteries provide 20–30 times the cycle life of traditional batteries.
q
Owner’s manual
Description
Tripp Lite’s SMART1200XLHGL medical-grade UPS system provides dependable lithium iron phosphate
(LiFePhos) battery backup, so you can work through short power failures and perform an orderly system
shutdown in a prolonged blackout. It’s fully compliant with UL 60601-1 regulations when plugged into a
hospital-grade outlet, making it ideal for use in patient-care vicinities. The 1kVA/750W capacity provides
up to 28 minutes of runtime for a half load and 10 minutes for a full load.
Built-in line-interactive voltage regulation corrects brownouts as low as 81V and overvoltages as high as
143V to normal 120V nominal output, without drawing battery power. A built-in isolation transformer with
Faraday shield offers full isolation and removes common mode noise while maintaining full AC surge
suppression in all modes. It also reduces the cumulative leakage current of connected equipment to less
than 100 A. Floating AC output prevents noise coupling from noisy hospital ground systems.
This UPS system features four NEMA 5-15R-HG hospital-grade outlets and has a hospital-grade NEMA
5-15P-HG plug with a six-foot cord for flexibility in placement. All four outlets provide both backup
protection and 940 joules of surge protection.
The SMART1200XLHGL also features diagnostic LEDs, as well as a USB port and a DB9 serial port that
work with Tripp Lite’s free downloadable PowerAlert® software for safe, unattended system shutdown and
file saves in the event of a prolonged power failure.
Features
Provides Ideal UPS Backup in Healthcare Facilities
1/5
q
Compliant with UL 60601-1 standards for use in patient-care vicinities when plugged into a hospital-
grade outlet
q
Built-in isolation transformer with Faraday shield offers full isolation and reduces cumulative leakage
current of connected equipment to less than 100 A
q
Hospital-grade NEMA 5-15P-HG plug with 6 ft. cord provides flexibility in placement
Battery Backup and Full Surge Protection
q
Supports half load for 28 min. and full load for 10 min. with standard LiFePhos internal battery
Hospital-grade NEMA 5-15R-HG outlets provide 940 joules of surge protection
EMI/RFI noise filtering ensures equipment runs smoothly without line noise interference
Resistant to electrostatic discharge
10,000-cycle LiFePhos battery
q
q
q
q
LEDs and Audible Alarms Keep You Aware of Power Status
q
Indicator lights monitor when the UPS is on and supplying utility power, when operating in voltage
correction mode or in battery mode, relative load level and low-battery warning
q
Audible alarms alert you to power failure, overload and low battery conditions
Mute/quiet mode ensures “alarm fatigue” compliance
q
Saves Your Files, Even When You’re Away
q
Works with Tripp Lite PowerAlert software (available as a free download) to enable safe, unattended
system shutdown and files saves during prolonged power failures
q
Connects to your computer via DB9 or USB port
Specifications
OVERVIEW
UPC Code
037332192202
OUTPUT
Output Volt Amp Capacity (VA)
Output kVA Capacity (kVA)
Output Watt Capacity (Watts)
Power Factor
Nominal Output Voltage(s)
Supported
Frequency Compatibility
Output Voltage Regulation (Line
Mode)
1000
1
750
0.8
115V; 120V
60 Hz
-18%, +8%
2/5
Output Voltage Regulation (Battery
Mode)
Output Receptacles
Output Receptacle Details
Output AC Waveform (AC Mode)
Output AC Waveform (Battery
Mode)
Individually Controllable Load Banks
115V (+/- 5%)
(4) 5-15R
Hospital grade output receptacles
Sine wave
PWM sine wave
No
INPUT
Rated input current (Maximum Load)
Nominal Input Voltage(s) Supported
UPS Input Connection Type
Input Circuit Breakers
UPS Input Cord Length (ft.)
UPS Input Cord Length (m)
Recommended Electrical Service
Input Cord Length (ft.)
Input Cord Length (m)
Input Phase
9.2A
120V AC
5-15P-HG
15A
6
1.8
15A 120V
6
1.83
Single-Phase
BATTERY
Full Load Runtime (min.)
Half Load Runtime (min.)
DC System Voltage (VDC)
Battery Recharge Rate (Included
Batteries)
Battery Access
Expandable Runtime
10 min. (750w)
28 min. (375w)
36
Less than 4.5 hours from 10% to 90%
Battery access door
No
VOLTAGE REGULATION
Voltage Regulation Description
Overvoltage Correction
Undervoltage Correction
Severe Undervoltage Correction
Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 81 to 143
Input voltages between 126 and 143 are reduced by 9%
Input voltages between 96 and 106 are boosted by 10%
Input voltages between 81 and 95 are boosted by 21%
USER INTERFACE, ALERTS & CONTROLS
Switches
2 Switches control off/on power status and alarm-cancel/self-test operation
3/5
Alarm Cancel Operation
Audible Alarm
LED Indicators
Power-fail alarm can be silenced using alarm-cancel switch; once silenced, alarm will re-sound to indicate low-
battery status
Factory-muted audible alarm indicates power-failure, overload and low-battery conditions
5 LEDs indicate line power, battery power, overload, voltage regulation and battery low/replace status
SURGE / NOISE SUPPRESSION
UPS AC Suppression Joule Rating
UPS AC Suppression Response
Time
EMI / RFI AC Noise Suppression
AC Suppression Joule Rating
940
Instantaneous
Yes
940
ISOLATION
Output Isolation Transformer
Leakage Current
Hospital grade load isolation transformer
Less than 100 microamps
PHYSICAL
Installation Form Factors Supported
with Optional Accessories
Primary Form Factor
UPS Power Module Dimensions
(hwd, in.)
UPS Power Module Dimensions
(hwd, cm)
UPS Power Module Weight (lbs.)
UPS Power Module Weight (kg)
Shipping Dimensions (hwd / in.)
Shipping Dimensions (hwd / cm)
Shipping Weight (lbs.)
Shipping Weight (kg)
Cooling Method
UPS Housing Material
Primary UPS Height (mm)
Primary UPS Width (mm)
Primary UPS Depth (mm)
Wallmount (UPSWM - tower mounting kit)
Tower
12.5 x 7.5 x 9.5
31.75 x 19.05 x 24.13
33.6
15.24
17.000 x 11.400 x 13.100
43.18 x 28.96 x 33.27
36.5400
16.57
Fan
PVC
318
191
241
ENVIRONMENTAL
Operating Temperature Range
Storage Temperature Range
+32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius
+5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius
4/5
Relative Humidity
AC Mode BTU / Hr. (Full Load)
Battery Mode BTU / Hr. (Full Load)
AC Mode Efficiency Rating (100%
Load)
0 to 95%, non-condensing
162.8
315.2
94%
COMMUNICATIONS
Communications Interface
Network Monitoring Port Description
PowerAlert Software
Communications Cable
USB; DB9 Serial
Supports detailed monitoring of UPS and site power conditions
For local monitoring via the UPS’s built-in communication ports , download PowerAlert Local software at
http://www.tripplite.com/poweralert
USB and DB9 serial cabling included
LINE / BATTERY TRANSFER
Transfer Time
Low Voltage Transfer to Battery
Power (Setpoint)
High Voltage Transfer to Battery
Power (Setpoint)
2-4 milliseconds
81
143
SPECIAL FEATURES
Grounding Lug
Cold Start (Startup in Battery Mode
During a Power Failure)
High Availability UPS Features
Grounding lug (equipotential)
Cold-start operation supported
Hot swappable batteries
CERTIFICATIONS
UPS Certifications
Tested to UL1778 (USA); Tested to CSA (Canada); Meets FCC Part 15 Category A (EMI); Tested to UL60601-1
(medical grade)
WARRANTY
Product Warranty Period
(Worldwide)
5-year limited warranty
© 2018 Tripp Lite. All rights reserved. All product and company names are trademarks or registered trademarks of their respective holders. Use of them does
not imply any affiliation with or endorsement by them. Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice.
Tripp Lite uses primary and third-party agencies to test its products for compliance with standards. See a list of Tripp Lite's testing agencies:
https://www.tripplite.com/products/product-certification-agencies
5/5
京公网安备 11010802033920号
EEWORLD
