EEWORLDEEWORLDEEWORLD

Part Number

Search

S-1135C19-U5T1G

Description
IC REG LINEAR 1.9V 300MA SOT23-5
Categorysemiconductor    Power management   
ManufacturerABLIC
Environmental Compliance
Download Datasheet Parametric View All

S-1135C19-U5T1G Overview

IC REG LINEAR 1.9V 300MA SOT23-5

S-1135C19-U5T1G Parametric

Parameter NameAttribute value
Output configurationjust
Output typefixed
Number of voltage regulators1
Voltage - input (maximum)5.5V
Voltage - Output (minimum/fixed)1.9V
Voltage - Output (maximum)-
Current - Output300mA
Current - static (Iq)1µA
Current - Power (maximum)65µA
PSRR65dB(1kHz)
Control characteristicsEnable
Protective functionOvercurrent
Operating temperature-40°C ~ 85°C(TA)
Installation typesurface mount
Package/casingSC-74A,SOT-753
Supplier device packagingSOT-23-5
S-1135 Series
www.ablic.com
© ABLIC Inc., 2008-2018
5.5 V INPUT, 300 mA VOLTAGE REGULATOR
Rev.2.3
_00
The S-1135 Series, developed using the CMOS technology, is a positive voltage regulator IC which has the low dropout
voltage, the high-accuracy output voltage and the low current consumption (300 mA output current).
A 1.0
μF
small ceramic capacitor can be used. It operates with low current consumption of 45
μA
typ.
The overcurrent protection circuit prevents the load current from exceeding the current capacity of the output transistor. The
ON / OFF circuit ensures longer battery life.
Various capacitors, also small ceramic capacitors, can be used for this IC more than for the conventional regulator ICs which
have CMOS technology.
Furthermore, a small SOT-89-5, SOT-23-5, and HSNT-6A packages realize high-density mounting.
Features
Output voltage:
Input voltage:
Output voltage accuracy:
Dropout voltage:
Current consumption:
Output current:
Input and output capacitors :
Ripple rejection:
Built-in overcurrent protection circuit:
Built-in ON / OFF circuit:
1.0 V to 3.5 V, selectable in 0.05 V step
1.5 V to 5.5 V
±1.0%
(1.0 V to 1.45 V output product :
±15
mV)
160 mV typ. (2.6 V output product, I
OUT
=
300 mA)
During operation:
45
μA
typ., 65
μA
max.
During power-off:
0.1
μA
typ., 1.0
μA
max.
Possible to output 300 mA (V
IN
V
OUT(S)
+
1.0 V)
*1
A ceramic capacitor of 1.0
μF
or more can be used.
70 dB typ. (1.0 V output product, f = 1.0 kHz)
Limits overcurrent of output transistor.
Ensures long battery life.
Discharge shunt function “available” / “unavailable” is selectable.
Pull-down / pull-up function “available” / “unavailable” is selectable.
Ta =
−40°C
to
+85°C
Operation temperature range:
Lead-free, Sn 100%, halogen-free
*2
*1.
Attention should be paid to the power dissipation of the package when the output current is large.
*2.
Refer to “
Product Name Structure”
for details.
Applications
Power supply for battery-powered device
Power supply for cellular phone
Power supply for portable equipment
Packages
SOT-89-5
SOT-23-5
HSNT-6A
1
Fixed-point DSP fractional multiplication and addition calculation
The installed version is CCS5.5. This version only supports software simulation of the C55 series but not of the C54 series. Therefore, I used the TMS320C5510 chip for this experiment. The process of ...
fish001 DSP and ARM Processors
Abnormal erasure of data in the information segment of the msp430 MCU, please help me
When doing modbus485 communication, some parameters are stored in the 430 information segment. Now the parameters are written as other collected data. This happened twice, and both times they were wri...
hanwenli123 Analog electronics
Micro open source USB development board
[b]TOMU[/b] is an open source, extremely tiny development board with a USB interface. It is only 13mm long, a completely open source development board that uses a silabs Gecko EFM32HG309 processor and...
dcexpert DIY/Open Source Hardware
I have some circuit design questions.
The company asked me to design a board for testing motors. It is mainly used to test brushless motors and carbon brush motors. It is required to be able to achieve a wide load power supply DC6-220V, w...
FYzj Analog electronics
【AT-START-F425 Review】TMR Servo Driver
[Purpose] In order to demonstrate CAN dual-signal communication, AT32F425 is needed as the receiver to drive the servo to work. [Idea] In the previous example, CH582 uses Bluetooth to control the serv...
lugl4313820 Domestic Chip Exchange

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

Datasheet   0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Room 1530, 15th Floor, Building B, No. 18 Zhongguancun Street, Haidian District, Beijing Telephone: (010) 82350740 Postal Code: 100190
Copyright © 2005-2024 EEWORLD.com.cn, Inc. All rights reserved 京ICP证060456号 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号