TC1313-BA3EUNTR datasheet, PDF

Datasheet> All Categories > Power/power management> The power supply circuit> TC1313-BA3EUNTR

TC1313-BA3EUNTR: Description0.5 A SWITCHING REGULATOR, 2400 kHz SWITCHING FREQ-MAX, PDSO10; CategoryPower/power management The power supply circuit; File Size381KB，28 Pages; ManufacturerMicrochip; Websitehttps://www.microchip.com; Environmental Compliance

Download Datasheet Parametric View All

TC1313-BA3EUNTR Overview

0.5 A SWITCHING REGULATOR, 2400 kHz SWITCHING FREQ-MAX, PDSO10

TC1313-BA3EUNTR Parametric

Parameter Name	Attribute value
Is it lead-free?	Lead free
Is it Rohs certified?	conform to
Maker	Microchip
Parts packaging code	MSOP
package instruction	TSSOP, TSSOP10,.19,20
Contacts	10
Reach Compliance Code	compli
ECCN code	EAR99
Other features	PFM CONTROL TECHNIQUE ALSO POSSIBLE; SECOND OUTPUT VOLTAGE IS 3.3V
Analog Integrated Circuits - Other Types	SWITCHING REGULATOR
control mode	CURRENT-MODE
Control Technology	PULSE WIDTH MODULATION
Maximum input voltage	5.5 V
Minimum input voltage	2.7 V
Nominal input voltage	3.6 V
JESD-30 code	S-PDSO-G10
JESD-609 code	e3
length	3 mm
Humidity sensitivity level	1
Number of functions	1
Number of terminals	10
Maximum operating temperature	85 °C
Minimum operating temperature	-40 °C
Maximum output current	0.5 A
Nominal output voltage	3.2 V
Package body material	PLASTIC/EPOXY
encapsulated code	TSSOP
Encapsulate equivalent code	TSSOP10,.19,20
Package shape	SQUARE
Package form	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH
Peak Reflow Temperature (Celsius)	260
power supply	3/5 V
Certification status	Not Qualified
Maximum seat height	1.1 mm
Maximum supply current (Isup)	0.1 mA
surface mount	YES
Switch configuration	BUCK
Maximum switching frequency	2400 kHz
Temperature level	INDUSTRIAL
Terminal surface	Matte Tin (Sn)
Terminal form	GULL WING
Terminal pitch	0.5 mm
Terminal location	DUAL
Maximum time at peak reflow temperature	40
width	3 mm

Preview

Download Datasheet

View All

TC1313

500 mA Synchronous Buck Regulator,

+ 300 mA LDO

Features

• Dual-Output Regulator (500 mA Buck Regulator

and 300 mA Low-Dropout Regulator (LDO))

• Total Device Quiescent Current = 57 µA (Typ.)

• Independent Shutdown for Buck and LDO

Outputs

• Both Outputs Internally Compensated

• Synchronous Buck Regulator:

- Over 90% Typical Efficiency

- 2.0 MHz Fixed-Frequency PWM

(Heavy Load)

- Low Output Noise

- Automatic PWM-to-PFM mode transition

- Adjustable (0.8V to 4.5V) and Standard

Fixed-Output Voltages (0.8V, 1.2V, 1.5V,

1.8V, 2.5V, 3.3V)

• Low-Dropout Regulator:

- Low-Dropout Voltage = 137 mV Typ. @

200 mA

- Standard Fixed-Output Voltages

(1.5V, 1.8V, 2.5V, 3.3V)

• Small 10-pin 3X3 DFN or MSOP Package

Options

• Operating Junction Temperature Range:

- -40°C to +125°C

• Undervoltage Lockout (UVLO)

• Output Short Circuit Protection

• Overtemperature Protection

Description

The TC1313 combines a 500 mA synchronous buck

regulator and 300 mA Low-Dropout Regulator (LDO)

to provide a highly integrated solution for devices that

require multiple supply voltages. The unique combina-

tion of an integrated buck switching regulator and low-

dropout linear regulator provides the lowest system

cost for dual-output voltage applications that require

one lower processor core voltage and one higher bias

voltage.

The 500 mA synchronous buck regulator switches at a

fixed frequency of 2.0 MHz when the load is heavy,

providing a low-noise, small-size solution. When the

load on the buck output is reduced to light levels, it

changes operation to a Pulse Frequency Modulation

(PFM) mode to minimize quiescent current draw from

the battery. No intervention is necessary for smooth

transition from one mode to another.

The LDO provides a 300 mA auxiliary output that

requires a single 1 µF ceramic output capacitor,

minimizing board area and cost. The typical dropout

voltage for the LDO output is 137 mV for a 200 mA

load.

The TC1313 is available in either the 10-pin DFN or

MSOP package.

Additional protection features include: UVLO,

overtemperature and overcurrent protection on both

outputs.

For a complete listing of TC1313 standard parts,

consult your Microchip representative.

Applications

•

Cellular Phones

Portable Computers

USB-Powered Devices

Handheld Medical Instruments

Organizers and PDAs

Package Type

10-Lead DFN

SHDN2

IN2

OUT2

GND

IN1

SHDN1

FB1

OUT1

10-Lead MSOP

SHDN2

IN2

OUT2

GND

IN1

SHDN1

FB1

OUT1

2005 Microchip Technology Inc.

DS21974A-page 1

Recommended Resources

INA102 resistor bridge differential amplifier circuit diagram

Car battery charging circuit diagram

High power switching power supply circuit diagram (PM4020A)

Capacitive AC bridge circuit

Sewing machine motor phase control speed regulation circuit

Computer motherboard circuit diagram 815 3_24

Experiment of controlling relay with MF RC522 RF card based on Arduino UNO R3: Hardware support: 1. An Arduino Uno R32. An MF RC522 contactless RF receiver module + RF card3. A 5v electronic relaySoftware tools: IDE (arduino-1.0.5-r2)Hardware connection: RC522 working voltage 3....; Jacktang RF/Wirelessly

Problems in transplanting UCOSII to 51 MCU: I am porting UCOSII to my STC MCU and found an example:There is a section in the example:EXTRN IDATA (OSTCBCur)EXTRN IDATA (OSTCBHighRdy)EXTRN IDATA (OSRunning)EXTRN IDATA (OSPrioCur)EXTRN IDATA (OSPr...; chenbingjy Real-time operating system RTOS

LiChuang Mall is right and confident in its mistakes. Everyone should be careful and don't be cheated.: Recently designed 2 boards Selected a material LD1117AG-33-TN3-AR in LiChuang MallLiChuang Mall has design schematics and PCB for material referenceI downloaded the design to the circuit board, but th...; youyou_123 Talking about work

The CC2530 low-power terminal keeps reconnecting to the network and consumes power: Test the low power mode of its ZIGBEE protocol stack. TI has indeed spent a lot of effort on this protocol stack and the operating system OSAL that supports it. It is very easy to use. After making a ...; fish001 Wireless Connectivity

Crazy Shell AI open source drone OPENMV script burning: OPENMV scriptwritingThe burning of OPENMV script is relatively simple, mainly relying on the previously installed OPENMV IDE. The specific steps are as follows:Open the openmv die, as shown below.Open...; fengke Test/Measurement

For C5000, how to boot a program larger than 48K?: For C5000, the on-chip BOOT program moves the contents of the data area to the RAM in the program area after power-on, so the FLASH must be placed in the data area after RESET. Since the space in the ...; fish001 DSP and ARM Processors

Shortcut: A0 A1 A2 A3 A4 A5 A6 A7 A8 A9 AA AB AC AD AE AF AG AH AI AJ AK AL AM AN AO AP AQ AR AS AT AU AV AW AX AY AZ B0 B1 B2 B3 B4 B5 B6 B7 B8 B9 BA BB BC BD BE BF BG BH BI BJ BK BL BM BN BO BP BQ BR BS BT BU BV BW BX BY BZ C0 C1 C2 C3 C4 C5 C6 C7 C8 C9 CA CB CC CD CE CF CG CH CI CJ CK CL CM CN CO CP CQ CR CS CT CU CV CW CX CY CZ D0 D1 D2 D3 D4 D5 D6 D7 D8 D9 DA DB DC DD DE DF DG DH DI DJ DK DL DM DN DO DP DQ DR DS DT DU DV DW DX DZ

Popular Components