REVISION AZ
DO NOT
SCALE FROM
THIS PRINT
SSW-1XX-22-XXX-X-VS-XX-X-XX
((NO OF POS X .10 [2.5]) + .02 [0.5]
(SEE NOTE 12)
.060 1.52 REF
02
.095 2.41
REF
No OF POSITIONS
-02 THRU -50
LEAD STYLE
-22 (USE C-17-02-X)
PLATING SPECIFICATIONS
-G: GOLD, 20µ" Au / 50µ" Ni MIN ON CONTACT,
3µ" AU / 50µ" Ni MIN ON TAIL
-S: SELECTIVE, 30µ" Au / 50µ" Ni MIN ON CONTACT, MATTE TIN TAIL
-H: HEAVY GOLD 30µ" Au / 50µ" Ni MIN
ON CONTACT, 3µ" Au / 50µ" Ni MIN ON TAIL
-F: FLASH SELECTIVE, 3µ" Au / 50µ" Ni MIN ON CONTACT, MATTE TIN TAIL
-STL: SELECTIVE, 30µ" Au / 50µ" Ni MIN
ON CONTACT AREA, TIN /LEAD (90/10 +/-5%) TAIL
-SM: SELECTIVE, 30µ" Au / 50µ" Ni MIN ON CONTACT, MATTE TIN TAIL
-FM: FLASH SELECTIVE, 3µ" Au / 50µ" Ni MIN ON CONTACT,
MATTE TIN TAIL (-VS OPTION ONLY)
-L: LIGHT SELECTIVE, 10µ" Au / 50µ" Ni MIN
ON CONTACT AREA, MATTE TIN TAIL
OPTION
-TR: TAPE & REEL
(AVAILABLE FOR POSITIONS -02
THRU -28, -VS OPTION ONLY
OPTION
-P: PICK AND PLACE (5 POS MIN)
(SEE FIG 5, SHT 3)
(USE LMP-02 FOR -D OPTION)
(USE PPP-12 FOR -S OPTION)
-K: PAD (3 POS MIN)
(SEE FIG 6, SHT 3)
-N: NOTCH (SEE FIG 7, SHT 4, POSITIONS 05, 07,
08, 10, 12, 13, 15, 17, 20, 25, 32, 36 ONLY)
(ONLY AVAILABLE IN -D ROW, -VS OPTION)
(USE NSW-XX-D-N-XX BODY, SEE TABLE 2)
(NOT AVAILABLE WITH THE -P OPTION)
POLARIZING OPTION
INDICATE POS (SEE FIG 4, SHT 2)
(NOT AVAILABLE FOR ALL POSITIONS
ON SINGLE ROW WITH (-P) OPTION)
(SEE FIG 8, SHT 2)
OPTION
-VS: VERTICAL SURFACE MOUNT (SEE FIG 1)
01
03
-S: SINGLE ROW
04 02
.195 4.95 REF
BODY SPECIFICATION
-S: SINGLE (USE SSW-XX-S, SEE FIG 1)
-D: DOUBLE (USE SSW-XX-D, SEE FIG 1)
-T: TRIPLE (USE SSW-XX-T, SEE FIG 2 & 3)
03 01
-D: DOUBLE ROW
-VS: VERTICAL SURFACE MOUNT
FIG 1
.190 4.83
.190 4.83
IN-PROCESS
DOUBLE ROW
C
90.0°
+3°
- 2°
.335 8.51 REF
C
.004 [0.10]
.05 1.27
(SEE NOTE 9)
C
L
R .025 [.64] (TYP)
C
.004 [0.10]
.203±.010 5.16±0.25
C
L
IN-PROCESS
SINGLE ROW
C
90.0°
+3°
- 2°
R .025 [.64] (TYP)
.031 0.79 x .016 [.41] REF (TYP)
NOTES:
1.
C
REPRESENTS A CONTROL PLAN CRITICAL DIMENSION.
2. MAXIMUM CUT FLASH: .015[.38] WITH NO FLASH BELOW STANDOFFS OR IN CONTACT HOLES.
3. MAXIMUM ALLOWABLE BOW: .003[.08] INCH/INCH.
4. MAXIMUM ALLOWABLE SWAY: 2° EITHER DIRECTION.
5. MAXIMUM ALLOWABLE VARIATION BETWEEN ROWS: .010[.25].
6. "END WALLS" AFTER CUTTING SHOULD BE .020±.003 [.51±.08].
7. SHEAR TAILS TO DIMENSION SHOWN, BURR ALLOWED ON TOP SIDE (MOLD SIDE) TO .005 [.13] MAX
8. POSITIONS -05 THROUGH -50 TO BE PACKAGED INTUBES;
POSITIONS -02 THROUGH -04 TO BE LAYER PACKAGED.
9. MEASURED AT BEND RADIUS, NOT AT END OF PIN.
10. MINIMUM CONTACT PUSHOUT FORCE: 1.5 lbs.
11. POLARIZED CORNER OF PPP-12 IS TO BE ORIENTED TOWARD POSITION 1.
12. SINGLE ROW SURFACE MOUNT PARTS: FOR ODD POSITIONS, LOSE ONE POSITION PER CUT,
FOR EVEN POSITIONS, LOSE TWO POSITIONS PER CUT.
.31 7.87
(SEE NOTE 7)
.05 1.27
(SEE NOTE 9)
-D: DOUBLE ROW
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
DECIMALS
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
-S: SINGLE ROW
*
PROPRIETARY NOTE
*
.XX: .01 [0.3]
2
.XXX: .005 [0.13]
.XXXX: .0020 [0.051]
ANGLES
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail info@SAMTEC.com
code 55322
DESCRIPTION:
DWG. NO.
MATERIAL:
INSULATOR: SINGLE & DOUBLE ROW: LCP, UL 94 VO
TRIPLE ROW: PCT, UL 94 VO
COLOR: BLACK
TERMINAL: PHOSPHOR BRONZE
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
.100 [2.54] SURFACE MOUNT ASSEMBLY
SSW-1XX-22-XXX-X-VS-XX-X-XX
SHEET
1
OF
4
F:\DWG\MISC\MKTG\SSW-1XX-22-XXX-X-VS-XX-X-XX-MKT.SLDDRW
BY:
PLUMMER 01/20/97
REVISION AZ
02
01
02
02
03
01
01
01
INSERT PK-15-N INTO SPECIFIED POS AND BREAK OFF TAB
FIG 4
POLARIZATION LOCATION
X
C
L
Y
01
Y
EVEN POSITIONS
X = (NO OF POS / 2), Y = X+1
01
X
C
L
ODD POSITIONS
X = ((NO OF POS - 1) / 2), Y = X+1
(POLARIZATION NOT AVAILABLE IN POSITION X & Y WITH -P OPTION)
FIG 8
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
*
PROPRIETARY NOTE
*
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail info@SAMTEC.com
code 55322
DESCRIPTION:
DWG. NO.
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
.100 [2.54] SURFACE MOUNT ASSEMBLY
SSW-1XX-22-XXX-X-VS-XX-X-XX
PLUMMER 01/20/97
SHEET
2
OF
4
F:\DWG\MISC\MKTG\SSW-1XX-22-XXX-X-VS-XX-X-XX-MKT.SLDDRW
BY:
REVISION AZ
"R"
"A"
PPP-12
.435 11.05
"S"
.195 4.95
REF
.021±.020 0.54±0.51
"R"
.390 9.91
.395 10.03
REF
.138 3.50
(USE K-DOT-.138-.250-.005)
-S: SINGLE ROW
(SEE NOTE 11)
-S: SINGLE ROW
.020 [.51]
.020 [.51]
NOTE: "R" = USED MEASURED DIMENSION (REF)
"S" = {("R" / 2 - .069 [1.75]) .020 [.51]
FOR ODD: "A" = ("R"/2) -.2475 [6.287]
FOR EVEN: "A" = ("R"/2) -.1975 [5.027]
"R"
"S"
"R"
"C"
.393 9.98
.390 9.91
.030±.020 0.77±0.51
.280 7.11
REF
.256 [6.50]
(USE K-DOT-.256-.375-.005)
.225 5.72
REF
LMP-02
.008 0.20
.335 8.51
-D: DOUBLE ROW
NOTE: "R" = USED MEASURED DIMENSION (REF)
"S" = {("R" / 2 - .128 [3.25]) .020 [.51]
-D: DOUBLE ROW
.050 1.27
FIG 6
-K: PAD OPTION
F:\DWG\MISC\MKTG\SSW-1XX-22-XXX-X-VS-XX-X-XX-MKT.SLDDRW
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
"C" = ("R"/2) -.1125 [2.858]
.020 [.51]
*
PROPRIETARY NOTE
*
FIG 5
-P: PICK & PLACE PAD OPTION
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail info@SAMTEC.com
code 55322
DESCRIPTION:
DWG. NO.
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
.100 [2.54] SURFACE MOUNT ASSEMBLY
SSW-1XX-22-XXX-X-VS-XX-X-XX
SHEET
3
OF
4
BY:
PLUMMER 01/20/97
REVISION AZ
PT-1-24-02-17
PT-1-24-02-60
PT-1-24-03-15
-S
PT-1-24-03-15
-S-K
.210 5.34
REF
-S-P
PT-1-24-06-29
-D
.180 4.57
REF
PT-1-24-06-29
-D-K
PT-1-24-06-29
.190 4.83
REF
C
L
.050 1.27
REF
.245 6.22
REF
.100 2.54 REF
-D-P
PACKAGING VIEWS
-N
NSW-XX-D-N-XX
(SEE TABLE 2)
NOTCH OPTION
DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
FIG 7
*
PROPRIETARY NOTE
*
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail info@SAMTEC.com
code 55322
DESCRIPTION:
DWG. NO.
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
.100 [2.54] SURFACE MOUNT ASSEMBLY
SSW-1XX-22-XXX-X-VS-XX-X-XX
PLUMMER 01/20/97
SHEET
4
OF
4
F:\DWG\MISC\MKTG\SSW-1XX-22-XXX-X-VS-XX-X-XX-MKT.SLDDRW
BY:
京公网安备 11010802033920号
EEWORLD
