Model 2249
Cable Assembly with BNC (M) on Each End
Features
•
•
•
•
The molded strain relief is directly bonded to the cable
jacket for superior strength and durability.
PTFE insulation and nickel tarnish resistant outer
shells used in the BNC connector provide long life and
reliability.
Gold-plated center contacts assure the most noise free
connection possible.
The connectors and cable are impedance matched.
Cable Designation & Type
2249-C:
2249-E:
2249-K:
2249-Y:
RG58C/U, 50 Ohm cable makes it ideal for most test and measurement applications, RF transmission
systems and Thinnet LAN applications.
RG59B/U, 75 Ohm cable assembly for use with broadcast, video, and other signal applications.
RG174/U, smaller diameter 50 Ohm cable for greater flexibility in tight applications. It is best suited for
use in low power situations where small size and flexibility is important.
RG223/U, double-shielded 50 Ohm cable assembly for superior interference rejection.
Materials
BNC male: Body – Brass, Tarnish Resistant Nickel Plating
Center Contact – Brass, Gold Plated
Dielectric – PTFE
Strain Relief:
PVC molded directly to cable and connectors
Sales: 800-490-2361
Technical Support:
technicalsupport@pomonatest.com
Fax: 425-446-5844
Europe:
31-(0) 40 2675 150
International:
425-446-5500
Where to Buy:
www.pomonaelectronics.com
USA:
All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm),
.xxx = ± .005” (,127 mm). All specifications are to the latest revisions.
Specifications are subject to change without notice. Registered trademarks are
the property of their respective companies.
Copyright © 2011
D1093883 Rev. 103
Page 1 of 2
Model 2249
Cable Assembly with BNC (M) on Each End
Ratings
Cable
Designation
C
E
K
Y
Type
RG58C/U
RG59B/U
RG174/U
RG223/U
Impedance
ohms
50
75
50
50
Capacitance Power Loss
Wire
per 1 foot / /100 Ft @ Insulation AWG Strands X
Type
AWG
1 MHz
0,304 meters
32.2 pf
22.0 pf
30.8 pf
30.8 pf
0.44 dB
0.60 dB
1.90 dB
0.35 dB
PE
PE
PE
PE
20
23
26
19
19X33
Solid
7X34
Solid
TC
BCCS
SPC
Center
Jacket
Material
PVCNC
PVC
PVCNC
Cable
OD
.195
.242
.110
.212
Temperature
Shield
TCB
BCB
TCB
SCB / SCB
(w/o connectors)
°C
-40 to +85
-40 to +60
-40 to +75
-40 to +60
BCCS PVCNC
AWG = American Wire Gauge
BCB = Bare Copper Braid
BCCS = Bare Copper Covered Steel
PE = Polyethylene
PVC = Polyvinyl Chloride
PVCNC = Polyvinyl Chloride Non-Contaminating
SCB = Silver Coated Braid
SPC = Silver Plated Copper
SSPE = Semi-Solid Polyethylene
TC = Tinned Copper
TCB = Tinned Copper Braid
Voltage:
500 Vrms max from center conductor to shield, and 30 Vac / 60 Vdc max from shield to earth in
controlled hands-free testing environments.
For CE compliance:
not intended for hand-held use at voltages above 30 Vac / 60 Vdc.
Ordering Information
Model: 2249-type-length*
Cable type: C, E, K, Y (see table for details)
Ordering Example: 2249-C-72, type “C” cable with a
72” (182,9cm) length.
Length (inches)
6 to 24
36 to 48
*60+
Length Tolerance
+/- .50"
+/- 1.00"
+/- 2%
*Additional lengths greater than 60" length are subject to a
tolerance of +/- 2% of cable length.
Cable Length for “C” Type*:
6” (15,24cm), 12” (30,5cm), 24” (61,0cm), 36” (91,4cm), 48” (121,9cm), 60” (152,4cm), 72” (182,9cm), 96”
(243,84cm), 120” (304,8cm), 144” (365,76cm), 180” (457,2cm), 240” (609,6cm), 300” (762cm), 360” (914,4cm), 600”
(1524cm)
Cable Length for “E” Type*:
6” (15,24cm), 12” (30,5cm), 24” (61,0cm), 36” (91,4cm), 48” (121,9cm), 60” (152,4cm), 72” (182,9cm), 120”
(304,8cm), 144” (365,76cm), 180” (457,2cm), 240” (609,6cm), 300” (762cm), 360” (914,4cm), 480” (1219cm), 600”
(1524cm)
Cable Length for “K” Type*:
6” (15,24cm), 12” (30,5cm), 24” (61,0cm), 36” (91,4cm), 48” (121,9cm), 60” (152,4cm), 72” (182,9cm), 120”
(304,8cm), 180” (457,2cm), 240” (609,6cm), 300” (762cm), 480” (1219cm)
Cable Length for “Y” Type*:
12” (30,5cm), 24” (61,0cm), 36” (91,4cm), 48” (121,9cm), 60” (152,4cm),
72” (182,9cm),120” (304,8cm), 144” (365,76cm), 180” (457,2cm), 240” (609,6cm)
* Additional lengths are available upon request.
Sales: 800-490-2361
Technical Support:
technicalsupport@pomonatest.com
Fax: 425-446-5844
Europe:
31-(0) 40 2675 150
International:
425-446-5500
Where to Buy:
www.pomonaelectronics.com
USA:
All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm),
.xxx = ± .005” (,127 mm). All specifications are to the latest revisions.
Specifications are subject to change without notice. Registered trademarks are
the property of their respective companies.
Copyright © 2011
D1093883 Rev. 103
Page 2 of 2