Get Connected
with 3M Anisotropic Conductive Film (ACF)
™
Get the job done faster, easier and more economically
with 3M
™
Anisotropic Conductive Film (ACF) Interconnect Solutions
3M offers you a variety of
high-performance anisotropic
conductive adhesive products,
used to mechanically and
electrically connect flex circuits
to a variety of substrates.
3M ACF 5363
•
Products for a variety of applications
– Flex circuit to PCB – Flex circuit to flex circuit – Flex circuit to glass panels
•
Good room temperature stability for long life on the factory floor
•
Low temperature processing for lead free solutions
•
Replaces connectors for cost savings, lower Z-axis standoff
Choose the 3M ACF Adhesive That’s Right for Your Application
Flex-On-Board
3M ACF 7303
75
43
Ag/Glass
135 to 150
25
2
500
0.75
<200 mOhms
>500
70/90
-40 to 80
Flex-On-Glas
3M ACF 7378
40
10
Au/Ni
160 to 180
5 to 9
3 to 4
200
0.2
<100 mOhms
>1000
85/85
-40 to 85
19
6
Au/Ni/Polymer
170 to 190
20 to 30
2 to 4
<100
0.015
<20 Ohms
>800
85/85
-40 to 100
3M ACF 5552R
These reliable, production-
proven technologies can replace
soldering and mechanical
fasteners in many applications,
reducing assembly time and
saving on space requirements.
Adhesive Thickness (micron)
Particle Diameter (micron)
Type of Particle
Bonding Temperature (°C)
Bonding Time (seconds)
Bonding Pressure (MPa)
Minimum Pitch (micron)
Minimum Pad Area (mm
2
)
Connection Resistance
90° Peel Adhesion (g/cm)
Temp/Humidity Aging (°C/%r.h.)
Temp Cycling (°C)
40
10
Au/Ni
195 to 210
10 to 20
3 to 5
200
0.15
<100 mOhms
>700
85/85
-40 to 100
Flex Type
Silver Ink on Polyester
Gold/Copper on Polyester
Gold/Copper on Polyimide
X
X
X
X
X
X
X
Connection Type
Flex to Glass
Flex to Plastic Device
Flex to PC Board
Flex to Flex
1
X
1
X
2
X
X
X
X
X
X
X
X
Tested only for silver frit; not suitable for ITO traces.
2
Suitable for silver ink traces only; not suitable for ITO traces.
3M
™
Electrically Conductive Adhesive Transfer Tape (ECATT)
An easy-to-use, pressure sensitive tape designed for connecting, bonding and grounding flex
circuits, PCBs and EMI/RFI shields and gaskets. Applied at room temperature – no thermal
bonding required! Not recommended for extreme high or low temperatures.
3M ECATT 9703
Adhesive Thickness (micron)
Type of Particle
Pitch (micron)
Application Notes
50
Ag/Ni
800
3M ECATT 9705
50
Ag/Ni
800
Good adhesion; reworkable. For connecting/bonding/grounding flex circuits,
printed circuits boards, EMI/RFI shields & gaskets, PSA attachments at room temp.
Not recommended for extreme high/low temps.
Contact 3M
3M provides applications development support. For more information, contact
3M at 800-251-8634. Or visit us on the web: www.3M.com/electronics.
Product Use:
All statements, technical information and recommendations contained in this document are based on tests or experience that 3M believes are reliable. However,
many factors beyond 3M’s control can affect the use and performance of a 3M product in a particular application, including conditions under which the product is used and the
time and environmental conditions in which the product is expected to perform. Since these factors are uniquely within the user’s knowledge and control, it is essential that the
user evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for the user’s method of application.
Warranty and Limited Remedy:
Unless stated otherwise in 3M’s product literature, packaging inserts or product packaging for individual products, 3M warrants that each
3M product meets the applicable specifications at the time 3M ships the product. Individual products may have additional or different warranties as stated on product literature,
package inserts or product packages. 3M MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE. User
is responsible for determining whether the 3M product is fit for a particular purpose and suitable for user’s application. If the 3M product is defective within the warranty period,
your exclusive remedy and 3M’s and seller’s sole obligation will be, at 3M’s option, to replace the product or refund the purchase price.
Limitation Of Liability:
Except where prohibited by law, 3M and seller will not be liable for any loss or damage arising from the 3M product, whether direct, indirect, special,
incidental, or consequential regardless of the legal theory asserted, including warranty, contract, negligence or strict liability.
Electronics Markets Materials Division
3M Electronics
3M Center, Building 225-3S-06
St. Paul, MN 55144-1000
www.3M.com/electronics
1-800-251-8634
Please recycle. Printed in USA.
Issued: 5/09 © 3M 2009.
All rights reserved. 6859HB
60-5002-0057-5
3M is a trademark of 3M Company.
Used under license by 3M subsidiaries and affiliates.
GD32 MCU
京公网安备 11010802033920号
EEWORLD
