Cutting Edge Technology
provides you with superior levels of cutting performance,
quality, value and comfort.
Highest quality American made
1% carbon alloy steel is
used for exceptional hardness and toughness. Tools are
engineered for precision cutting yet long lasting ruggedness.
These tools have the heft and feel that of a luxury car.
Special Handles
both standard and long are ergonomically
designed to fit most hands with no points of pressure. They are
enhanced by soft cushion grips for maximum comfort to reduce
cutting fatigue dramatically.
Exceptional Cutting Edges.
They are made with by using a
proprietary dual sharpening process and then raised to
optimum hardness and toughness through a induction heating
and tempering process. The result: Sharp, hard and tough
cutting edges outcut and outlast all others.
Cutters are available in Semi-Flush, Flush and Razor Flush
cutting edges.
Attractive satin coating protects against corrosion and
reduces glare.
Stainless steel double leaf springs
ESD Safe cushion grips for exceptional comfort
Available in Standard and Ergonomic handle lengths. Length of
tool with standard handle: 115mm (4-1/2”) and with
ergonomic handle: 140mm (5-1/2”)
100% Quality assurance:- Each cutter is checked individually at
the factory and are warranted for be free of defects in materials
and workmanship for the life of the tool
52
Superior Joint System:
Two halves of the tool are joined by
a fine thread interlocking screw and nut which mount on
precision machined bearing rings. This ensures a tight, perfect
alignment with smooth consistent cutting.
Precision
Tools
Standard Handle
115mm (4.5")
Ergonomic Handle
140mm (5.5")
Aven Inc. | 4595 Platt Road | Ann Arbor, MI 48108
Tel: 734-973-0099 | Fax: 734-973-0097 | www.aveninc.com
Strong versatile and long lasting, this popular shape can be used for
many applications. Designed to be durable through hundreds of
thousands of cuts.
Standard Handle
5111
5112
5113
Ergonomic Handle
7111
7112
7113
Cutting Edge
Semi-Flush
Flush
Razor Flush
™
Cutting Capacity*
.20 to 1.20mm
.15 to 1.50mm
.10 to 1.00mm
Same features as the oval head cutter but the relief provides extra
accessibility.
Standard Handle
5121
5122
5123
Ergonomic Handle
7121
7122
7123
Cutting Edge
Semi-Flush
Flush
Razor Flush
™
Cutting Capacity*
.20 to 1.20mm
.15 to 1.10mm
.10 to 0.90mm
Popular for wire and cable, extra rugged, 25% larger head than
standard oval cutters.
Standard Handle
5511
5512
5513
Ergonomic Handle
7511
7512
7513
Cutting Edge
Semi-Flush
Flush
Razor
Flush
™
Cutting Capacity*
.20 to 1.50mm
.15 to 1.50mm
.10 to 1.20mm
53
Precision
Tools
Same features as the large oval head cutter but the relief provides extra
accessibility.
Standard Handle
5521
5522
5523
Ergonomic Handle
7521
7522
7523
Cutting Edge
Semi-Flush
Flush
Razor Flush
™
Cutting Capacity*
.20 to 1.40mm
.15 to 1.40mm
.10 to 1.20mm
A more compact design pointed head for increased operator access, yet
covers a wide cutting range and long tool life.
Standard Handle
5211
5212
5213
Ergonomic Handle
7211
7212
7213
Cutting Edge
Semi-Flush
Flush
Razor Flush
™
Cutting Capacity*
.20 to 1.10mm
.15 to 1.10mm
.10 to 1.00mm
*Diameter of Soft Copper wire
Aven Inc. | 4595 Platt Road | Ann Arbor, MI 48108
Tel: 734-973-0099 | Fax: 734-973-0097 | www.aveninc.com
Same features as the tapered head cutter but with a lower profile for
better access and extra visibility.
Standard Handle
5221
5222
5223
Ergonomic Handle
7221
7222
7223
Cutting Edge
Semi-Flush
Flush
Razor
Flush
™
Cutting Capacity*
.20 to 1.10mm
.15 to 1.00mm
.10 to 0.90mm
SMT Cutter, 30% smaller head than standard oval cutters.
Standard Handle
5311
5312
5313
Ergonomic Handle
7311
7312
7313
Cutting Edge
Semi-Flush
Flush
Razor Flush
™
Cutting Capacity*
.20 to 1.10mm
.10 to 1.00mm
.10 to 0.80mm
54
Miniature Taper Relief cutters are used only for exceptionally fine cutting
work. Usually access to the cutting area is difficult, requiring the very low
profile of this cutter with full relief.
Standard Handle
5421
5422
5423
Ergonomic Handle
7421
7422
7423
Cutting Edge
Semi-Flush
Flush
Razor Flush
™
Cutting Capacity*
.20 to 1.10mm
.10 to 1.00mm
.10 to 0.80mm
Precision
Tools
Tip cutter with a deep relief for an exceptionally low profile. Short sturdy
jaw. Razor Flush
™
cutting Edges.
Standard Handle
5049
Ergonomic Handle
7049
Cutting Edge
Razor Flush
™
Cutting Capacity
.10 to 0.65mm
Most popular tip cutter. Jaw is twice as long as standard cutters. Jaw is
slim with a low relieved profile. Razor Flush
™
cutting edges.
Standard Handle
5070
Ergonomic Handle
7070
Cutting Edge
Razor Flush
™
Cutting Capacity
.10 to 0.65mm
*Diameter of Soft Copper wire
Aven Inc. | 4595 Platt Road | Ann Arbor, MI 48108
Tel: 734-973-0099 | Fax: 734-973-0097 | www.aveninc.com
SMT Cutter. Extraordinarily small. Fine cutting edges and fine tip. Often
used under a microscope. Removes individual leads from fine pitch
components. Razor Flush
™
Cutting Edges.
Standard Handle
5071
Ergonomic Handle
7071
Cutting Edge
Razor Flush
™
Cutting Capacity
.05 to 0.40mm
An SMT cutter with a very small cutting head. Used for exceptionally fine
cutting. Relieved for maximum accessibility. Flush cutting edges.
Standard Handle
5075
Ergonomic Handle
7075
Cutting Edge
Flush
Cutting Capacity
.10 to 0.65mm
Most popular angulated cutter. Small cutting head with relief for excellent
visibility. Durability combined with fine cutting. Flush cutting edges.
Standard Handle
5082
Ergonomic Handle
7082
Cutting Edge
Flush
Cutting Capacity
.10 to 0.65mm
55
Precision
Tools
Largest cutting head. Robust. Excellent in cutting several leads in a single
cut. Relieved for enhanced visibility. Razor Flush
™
cutting edges.
Standard Handle
5072
Ergonomic Handle
7072
Cutting Edge
Razor Flush
™
Cutting Capacity
.10 to 0.65mm
This cutter, forged of carbon steel, has strength in the head and joint areas
needed to cut heavier gauge wire or cable. Cushion grips provide operator
comfort. A jaw restraining device is attached to insure spring retention.
Overall length 6" (152mm). Length of cutting blade 3/4" (19mm)
Standard Handle
–
Ergonomic Handle
7812
Cutting Edge
Flush
Cutting Capacity
.10 to 1.60mm
*Diameter of Soft Copper wire
Aven Inc. | 4595 Platt Road | Ann Arbor, MI 48108
Tel: 734-973-0099 | Fax: 734-973-0097 | www.aveninc.com
Features very fine tips, “eased” edges of the inner jaw to reduce the
risk of damage to the workpiece during forming, and a long jaw for
extended gripping power. Available with smooth or serrated
jaws. Standard & Short Chain nose pliers have tips dimension of
1.2mm W x 1.4mm H (.050” x .060”).
Standard Handle
511
512
513
Ergonomic Handle
711
712
713
Jaw Type
Standard Smooth
Standard Serrated
Short Smooth
Jaw Length
33mm (1.30”)
33mm (1.30”)
19mm (0.75”)
These pliers have exceptionally fine tips. The outer surface of the jaw is
rounded to the shape of smooth half cones. This design increases tool
access and allows forming of round loops. All edges of the inner jaws are
eased. Tip dimensions: 1.0mm W x 1.2mm H. ( .040” x .050” ).
Standard Handle
Ergonomic Handle
721
Jaw Type
Smooth
Jaw Length
31.7mm (1.25”)
56
521
Precision
Tools
Available in long and short jaws. The long jaws makes it possible to form
a wide range of loop diameters. The short jaw adds more stiffness and
strength to allow forming of heavier gauge wire with added control. Long
jaw pliers have a tip diameter of 0.7mm( .030”) and the short jaw pliers
have a tip diameter of 0.9mm (.035”).
Standard Handle
531
532
Ergonomic Handle
731
732
Jaw Type
Smooth
Smooth
Jaw Length
31.7mm (1.25”)
18.1mm (.715”)
These flat nose pliers have a long jaw and very thin tips. The tip gripping
area has a smooth finish. All inner edges are “eased” to reduce risk of
workpiece damage. Standard flat nose pliers have tips that are 3.5mm
(.140” ) wide and the Wide Tip Flat Nose Pliers have tips that are 6.3mm
( .250” ) wide.
Standard Handle
541
542
Ergonomic Handle
741
742
Jaw Type
Standard Smooth
Wide Smooth
Jaw Length
31.7mm (1.25”)
31.7mm (1.25”)
Aven Inc. | 4595 Platt Road | Ann Arbor, MI 48108
Tel: 734-973-0099 | Fax: 734-973-0097 | www.aveninc.com
京公网安备 11010802033920号
EEWORLD
