1210J2500821FFT

When the system is reset, execution starts from address 0, and the system is in svc management mode. Generally speaking, our app application is in user mode, but user mode cannot access hardware an...[Details]

When AC current is overloaded, the AC voltage applied to the load and the AC current passing through the load will have a phase difference, from which people derive the concept of power factor. The...[Details]

1. IO port The digital input/output ports have the following features: □ Each input/output bit can be programmed independently. □ Any combination of input and output is allowed. □ All 8 bits of P1 an...[Details]

(November 8, 2023, Shanghai, China) As one of the world's leading companies in the fields of industrial automation, informatization and digital transformation, Rockwell Automation was invited to part...[Details]

Recently, a major breakthrough has been made in the field of intelligent driving technology. High-level intelligent driving domain control technology has been successfully put into mass production....[Details]

Introduction For data storage, most of the storage space comes from camera sensors. In particular, current data acquisition needs may require 6-8 800M pixel cameras to collect RAW data and sto...[Details]

A very important basic unit. In recent years, FPGA has developed rapidly due to its high speed, high integration and high reliability. With the demand for high precision and high processing speed in m...[Details]

This article compares the arm and mobile solutions and introduces their characteristics. The above classification is based on the application object. In addition, there are more general-purpos...[Details]

RISC-V member SYSGO and Cobham Gaisler, the design center of Cobham Advanced Electronic Solutions (CAES), have announced a collaboration where SYSGO will provide its hypervisor-based real-time operat...[Details]

introduction The widespread use of power electronic devices has caused serious pollution to the public power grid, and the problems of harmonics and reactive power have received increasing...[Details]

FLASH main features The FLASH program memory and data EEPROM inside the STM8 are controlled by a set of general registers. Users can use these registers to program or erase the contents of the memory...[Details]

The main circuit of the half-bridge switching power supply is shown in Figure 2-14. Transistors T1 and T2, capacitors C1 and C2 serve as the four arms of the bridge respectively. One diagonal line is...[Details]

As early as when Model 3 was released in 2016, the minimalist style of its interior, especially the cancellation of the traditional dashboard, made many people wonder what was going on. Just yester...[Details]

The attached figure is a DC series voltage regulator circuit with an output voltage of +40V to +80V. Since the output voltage can be adjusted to +80V at most, and the power supply voltage of the in...[Details]

1. Set obj and src ifneq ($(OBJTREE),$(SRCTREE)) ifeq ($(CURDIR),$(SRCTREE)) you := else dir := $(subst $(SRCTREE)/,,$(CURDIR)) endif obj := $(if $(di...[Details]