UHF RFID Inlays
AD-383u7
Dimensions
Operating Frequency
RF Protocol
Chip
EPC Memory
TID Memory
1.969 x 1.181 in [50 x 30mm]
Common Applications
Global (860 – 960 MHz)
Apparel and Retail
ISO-18000-6C, EPC Class 1, Gen 2
Supply Chain, Inventory & Logistics
NXP UCODE 7
128 bit
96-bit, pre-encoded for multi-vendor chip
(MCS) based serialization
Toll free US 866-903-RFID (7343) /
rfid.info@averydennison.com
International +1-770-965-0807
PART NUMBER
Format
Antenna dimensions
(CD x MD)
600527
Dry Inlay
1.969 x 1.181 in [50 x
30mm]
N/A
PET
N/A
N/A
N/A
1.50 in [38.1mm]
2.126 in [54mm]
9-10 mils (229-254
microns)
-40 to 185 F [-40 to 85
C]
EU Directive
2011/65/EU
Compliant
100% read tested
with-of-tolerance inlay
marked
Inlay-side Out
3 in [76.2 mm]
13 in [330.2 mm]
600465
Wet Inlay
1.969 x 1.181 in [50 x
30mm]
2.126 x 1.34 in [54 x
34.01mm]
PET
S-490 (FASSON)
1.5M Clear PET
N/A
1.50 in [38.1mm]
2.284 in [58mm]
10-12 mils (254-305
microns)
-40 to 185 F [-40 to 85 C]
EU Directive 2011/65/EU
Compliant
100% read tested with-of-
tolerance inlay marked
PS Inlay-side Out
3 in [76.2 mm]
13 in [330.2 mm]
RF100376
Paper Label
1.969 x 1.181 in [50 x
30mm]
2.25 x 1.5 in [57.15 x
38.1mm]
N/A
S-490 (FASSON)
40# SCK (FASSON)
55# TT2C (FASSON)
Bright White
2 in [38.1mm]
2.409 in [61.19mm]
10-13 mils (254-330.2
microns)
-40 to 185 F [-40 to 85
C]
EU Directive
2011/65/EU Compliant
100% read tested with-
of-tolerance inlay
marked
Label-side Out
3 in [76.2 mm]
15.25 in [387.4 mm]
RF100350
Paper Label
1.969 x 1.181 in [50 x
30mm]
2.25 x 1.5 in [57.15 x
38.1mm]
PET
S-490 (FASSON)
40# SCK (FASSON)
55# TT2C (FASSON)
Bright White
2 in [38.1mm]
2.409 in [61.19mm]
10-13 mils (254-330.2
microns)
-40 to 185 F [-40 to 85
C]
EU Directive
2011/65/EU Compliant
100% read tested with-
of-tolerance inlay
marked
Label-side Out
3 in [76.2 mm]
15.25 in [387.4 mm]
Die-cut dimensions
Inlay substrate material
Inlay-to-liner adhesive
Liner material
Face Sheet
Standard pitch
Standard web width
Total thickness over
chip
Operating temperature
RoHS
Quality assurance
Un-wind direction
Core size with adaptor
insert
Maximum roll outer
diameter (not to
exceed)
Average # of units per
roll
Rev
15,000 good +/- 10%
00
10,000 good +/- 10%
00
2,300 good +/- 10%
00
8,500 good +/- 10%
00
Care and handling:
RFID inlays are sensitive to ESD. Observe standard industry practices relating to electronics/RFID to keep environmental impact
and static charge to a minimum.
Applications:
This product should be tested by the customer/ user thoroughly under end use conditions to ensure the product meets the particular
requirements. Avery Dennison does not represent that this product is fit for any particular purpose or use.
Warranty:
Please refer to Avery Dennison RFID standard terms and conditions.
Product Information:
Avery Dennison reserves the right to modify, change, supplement or discontinue product offerings at any time without notice. The
information contained herein is believed to be reliable but Avery Dennison makes no representation concerning the accuracy or correctness of the data.
Trademark statement:
Avery Dennison, S490 and Fasson are trademarks of Avery Dennison Corporation. For the most recent information on Avery
Dennison products, visit www.rfid.averydennison.com.
© 2017 Avery Dennison Corp. All rights reserved. 170 Monarch Lane, Miamisburg, OH 45342, USA
Third party trademarks and/or trade names used herein are the property of their respective owner(s).
Some of the trademarks appear for identification purposes only.
Microcontroller MCU
京公网安备 11010802033920号
EEWORLD
