The F2 pre-terminated contact is designed for fitting into single 0K series, multifibre connectors or
mixed optical /electrical connectors from 2B to 5B, 2K to 5K Series.
Its main features are:
– easy and fast assembly
– no need for costly and bulky equipment
– no polishing - no epoxy
– simple cleaning process
– easy identification with black PEEK
Technical Characteristics
Characteristics
Value
Standard
IEC 61300-02-02
IEC 61300-02-19
IEC 61300-02-18
IEC 61300-02-17
IEC 61300-02-12
IEC 61300-02-09
Optical
Characteristics
Average insertion loss
fibre 9/125 µm
Return loss fibre 9/125 µm
(UPC)
Value
Standard
Method
Insertion
Method B
Branching
Device Met.
Mating durability
10000 cycles
Damp heat steady state
up to 95% at 60° C
High temperature
+60° C
Low temperature
-20° C
Impact (Method A)
1 m onto concrete floor
Shock (3 cycles in 2 directions) 100g, 10-50 ms; 20g 6-9 ms
0.50 dB
≥
45 dB
IEC 61300-03-04
IEC 61300-03-06
Part Section Showing Internal Components
Female contact
1
body with holder
2
ferrule with holder
3
spring
4
crimping tube
5
retention clip
6
alignment tube
4
5
3
1
2
6
2
1
3
5
4
Male contact
1
body with holder
2
ferrule with holder
3
spring
4
crimping tube
5
retention clip
with support
Models
FFT.F2
Pre-terminated F2 male
fibre optic contact
Part Number
ø 4.4
ø2
~ 28.9
FFT.F2.BA2.LCE10
Fibre type
Singlemode 9/125
Fibre coating structure
Buffer coated ø 0.25 to 1.1 mm
PST.F2
Pre-terminated F2 female
fibre optic contact
Part Number
ø 4.4
ø2
~ 28.9
11.9
PST.F2.BA2.LCE10
Fibre type
Singlemode 9/125
Fibre coating structure
Buffer coated ø 0.25 to 1.1 mm
Note:
all dimensions are in millimetre.
Tooling for field termination (3K.93C Series)
Part Number
DCE.91.093.BVC
DCE.91.093.BVM
DCE.91.133.BVCW
DPC.91.701.V
DPC.91.101.A
Description
Positioner for signal
1)
(male), 0.9 mm
Positioner for signal
1)
(female), 0.9 mm
Positioner for power
2)
(male and female), 1.3 mm
Manual crimping tool (signal contacts ø 0.9)
Manual crimping tool (power contacts ø 1.3)
Part Number
DPD.99.010.5K
DCP.91.023.TN
WST.OU.110.20PN
WST.PN.102.3CR
DPW.99.PZ6.HEX
Description
Crimping tool for screen crimping on FUW and PUW
Spanner for tightening collet nut
Fibre cleaver for pre-terminated contact
3)
Primary coat stripper for pre-terminated contact
3)
Manual crimping tool for pre-terminated contact
3)
Note:
1) These positioners are suitable for use with both manual and pneumatic crimping tools according to the MIL-C-22520/7-01 standard.
2) These turrets can be used with manual crimping tool according to MIL-C-22520/1-01 standard. Power contacts are special with an oversized crimp barrel.
3) For specific use with the pre-terminated contacts FFT.F2.BA2.LCE10 or PST.F2.BA2.LCE10.
Positioner for signal contacts
Fibre cleaver
Manual crimping tool
Positioner for power contacts
Manual crimping tool
Crimping tool for screen
Primary coat stripper
Maintenance tools
DCS.91.F23.LA
Cleaning tool F2 contact
WST.KI.125.34
Cleaning kit F2 contact
Used for maintenance cleaning. The tool is made with a sponge
alcohol reservoir (supplied empty).
16 dry cotton buds are included. The threaded end allows
extraction/reinstallation of the F2 contact alignment device.
Fibre optic cleaning kit of 2 cotton buds, 1 dry and 1 being
soaked in IPA (Isopropyl Alcohol) used for cleaning the fibre optic
contacts.
DCS.F2.035.PN
Alignment device tool
DCT.F2.125.PA
Fibre Optic ferrule cleaner
Simple tool with two threaded end for installation/extraction
of the F2 contact alignment device. For use with WST.KI.125.34
kit above.
This cleaning tool comes with a bush for different cleaning
configurations. More than 500 cleaning per cleaner. This cleaner
is for on-site purposes only and should not replace regular
maintenance cleaning with cotton buds and alcohol.
WST.FB.CI1.10US2
Video inspection viewer
WST.LA.JDS.UF2
Visible laser source
A portable fibre optic viewer for F2 contact consisting of handset
京公网安备 11010802033920号
EEWORLD
