C1206X682G5GEC datasheet, PDF - EEWORLD Datasheet

Datasheet> All Categories > Passive components> C1206X682G5GEC

C1206X682G5GEC: DescriptionCAP CER 1206 6.8NF 50V C0G 2%; CategoryPassive components; File Size1MB，20 Pages; ManufacturerKEMET; Websitehttp://www.kemet.com; Environmental Compliance

Download Datasheet Parametric View All

C1206X682G5GEC Overview

CAP CER 1206 6.8NF 50V C0G 2%

C1206X682G5GEC Parametric

Parameter Name	Attribute value
capacitance	6800pF
Tolerance	±2%
Voltage - Rated	50V
Temperature Coefficient	C0G，NP0
Operating temperature	-55°C ~ 125°C
characteristic	Low ESL, soft termination
grade	-
application	Board Flex Sensitive, ESD Protected
failure rate	-
Installation type	Surface mount, MLCC
Package/casing	1206 (3216 metric)
size/dimensions	0.130" long x 0.063" wide (3.30mm x 1.60mm)
Height - Installation (maximum)	-
Thickness (maximum)	0.039"（0.98mm）
lead spacing	-
Lead form	-

Preview

Download Datasheet

View All

Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)

ESD, C0G Dielectric, 25 – 250 VDC

(Commercial & Automotive Grade)

Overview

The KEMET electrostatic discharge (ESD) rated commercial

and automotive grade surface mount capacitors in C0G

dielectric are suited for a variety of applications where

electrostatic discharge (ESD) events during assembly

or operation could damage the capacitor or the circuit.

These ESD rated capacitors provide the ability to design

within a given ESD criteria per the human body model

(HBM) AEC Q200–002 criteria. The KEMET automotive

grade capacitors also meet the other demanding

Automotive Electronics Council's AEC–Q200 qualification

requirements.

The C0G dielectric features a 125°C maximum operating

temperature and is considered “stable.” The Electronics

Industries Alliance (EIA) characterizes C0G dielectric as

a Class I material. Components of this classification are

temperature compensating and are suited for resonant

circuit applications, as well as those where Q and stability of

capacitance characteristics are required. The C0G dielectric

exhibits no change in capacitance with respect to time and

voltage, and boasts a negligible change in capacitance

compared to its value at 25°C. Capacitance change is limited

to ±30 ppm/°C from −55°C to +125°C.

Benefits

• AEC-Q200 automotive qualified

• ESD qualified per HBM - AEC Q200-002

• Available in package size EIA 0402, 0603, 0805, 1206

• DC Voltage ratings of 25 V, 50 V, 63 V, 100 V, 200 V and 250 V

• Capacitance range from 1 nF to 100 nF

• −55°C to +125°C operating temperature range

• Lead (Pb)-free, RoHS and REACH compliant

• Available capacitance tolerances of ±1%, ±2%, ±5%, ±10%, and ±20%

• No piezoelectric noise

• Extremely low ESR and ESL

Click image above for interactive 3D content

• High thermal stability

Open PDF in Adobe Reader for full functionality

• High ripple current capability

• Preferred capacitance solution at line frequencies and

into the MHz range

• No capacitance changes with respect to applied DC voltage

• Negligible capacitance change with respect to temperature from −55°C to +125°C

• No capacitance decay with time

• Non-polar devices, minimizing installation concerns

• 100% pure matte tin-plated termination finish allowing for excellent solderability

• Flexible Termination option available

Applications

Typical applications include: electrostatic discharge (ESD), integrated circuit (IC) protection, radio frequency (RF) filtering

function, input and output automotive applications such as controllers, navigation systems, airbags and keyless systems.

One world. One KEMET

C1091_C0G_ESD • 3/7/2018

Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)

ESD, C0G Dielectric, 25 – 250 VDC (Commercial & Automotive Grade)

Automotive C-Spec Information

KEMET automotive grade products meet or exceed the requirements outlined by the Automotive Electronics Council.

Details regarding test methods and conditions are referenced in document AEC–Q200, Stress Test Qualification for Passive

Components. These products are supported by a Product Change Notification (PCN) and Production Part Approval Process

warrant (PPAP).

Automotive products offered through our distribution channel have been assigned an inclusive ordering code C-Spec, “AUTO.”

This C-Spec was developed in order to better serve small and medium-sized companies that prefer an automotive grade

component without the requirement to submit a customer Source Controlled Drawing (SCD) or specification for review by a

KEMET engineering specialist. This C-Spec is therefore not intended for use by KEMET OEM automotive customers and are

not granted the same “privileges” as other automotive C-Specs. Customer PCN approval and PPAP request levels are limited

(see details below.)

Product Change Notification (PCN)

The KEMET product change notification system is used to communicate primarily the following types of changes:

• Product/process changes that affect product form, fit, function, and/or reliability

• Changes in manufacturing site

• Product obsolescence

KEMET Automotive

C-Spec

KEMET assigned

AUTO

Customer Notification Due To:

Process/Product change

Yes (with approval and sign off)

Yes (without approval)

Obsolescence*

Yes

Days Prior To

Implementation

180 days minimum

90 days minimum

KEMET assigned C-Specs require the submittal of a customer SCD or customer specification for review. For additional information contact KEMET.

Production Part Approval Process (PPAP)

The purpose of the Production Part Approval Process is:

• To ensure that supplier can meet the manufacturability and quality requirements for the purchased parts.

• To provide the evidence that all customer engineering design records and specification requirements are properly

understood and fulfilled by the manufacturing organization.

• To demonstrate that the established manufacturing process has the potential to produce the part.

KEMET Automotive

C-Spec

KEMET assigned

AUTO

PPAP (Product Part Approval Process) Level

●

○

●

○

●

KEMET assigned C-Specs require the submittal of a customer SCD or customer specification for review. For additional information contact KEMET.

● Part number specifi

c PPAP available

○ Product family PPAP only

C1091_C0G_ESD • 3/7/2018

Recommended Resources

Pulse signal generation and display circuit b

Typical wiring for normal application of HL402

Transistor Mixer Circuit 03

Circuit diagram of a 12-bit analog-to-analog converter composed of two 8-bit analog-to-analog converters

A JVC color TV remote control

Quartz crystal oscillator circuit using Mos field effect transistor

Bor application of bluenrg-1: Slow power-on can easily cause a freeze, so consider using bor undervoltage protection. There is a line in the manual that says bor can be configured by software, but it does not specify the specifica...; 南城北巷 ST - Low Power RF

Multisim op amp output is greater than the power supply problem: When I used Multisim to simulate the op amp circuit before, I found that the op amp output was greater than the power rail. Sometimes I wanted to use the op amp as a comparator for open-loop simulatio...; fish001 Analogue and Mixed Signal

How to choose between DT4215 and 15B for multimeter selection: I am planning to buy a multimeter. Most of the use scenarios require testing voltages of 600-900V (occasionally overvoltages of 1000+), so I have been using Fluke's 15B+. The meters in the company are...; bigbat Analog electronics

The world's first single-chip microcomputer was produced by TI: [i=s]This post was last edited by tiankai001 on 2019-2-14 11:35[/i] [font=宋体][size=4] [/size][/font] [font=宋体][size=4][b] [color=#000000]I just saw a post on the forum that introduced the development ...; tiankai001 MCU

EEWORLD University ---- Digital Integrated Circuit Analysis and Design: Digital Integrated Circuit Analysis and Design : https://training.eeworld.com.cn/course/6150Integrated circuits (ICs) are already ubiquitous, and most of them are digital ICs. This course allows you t...; 抛砖引玉 Embedded System

The contradiction between insulation withstand voltage and ESD: ESD requires a discharge path It is usually discharged into the ground through resistors and capacitors.However, the device has an insulation withstand voltage requirement. If the resistor and capacit...; sfcsdc Analog electronics

Shortcut: 00 01 02 03 04 05 06 07 08 09 0A 0C 0F 0J 0L 0M 0R 0S 0T 0Z 10 11 12 13 14 15 16 17 18 19 1A 1B 1C 1D 1E 1F 1H 1K 1M 1N 1P 1S 1T 1V 1X 1Z 20 21 22 23 24 25 26 27 28 29 2A 2B 2C 2D 2E 2F 2G 2K 2M 2N 2P 2Q 2R 2S 2T 2W 2Z 30 31 32 33 34 35 36 37 38 39 3A 3B 3C 3D 3E 3F 3G 3H 3J 3K 3L 3M 3N 3P 3R 3S 3T 3V 40 41 42 43 44 45 46 47 48 49 4A 4B 4C 4D 4M 4N 4P 4S 4T 50 51 52 53 54 55 56 57 58 59 5A 5B 5C 5E 5G 5H 5K 5M 5N 5P 5S 5T 5V 60 61 62 63 64 65 66 67 68 69 6A 6C 6E 6F 6M 6N 6P 6R 6S 6T 70 71 72 73 74 75 76 77 78 79 7A 7B 7C 7M 7N 7P 7Q 7V 7W 7X 80 81 82 83 84 85 86 87 88 89 8A 8D 8E 8L 8N 8P 8S 8T 8W 8Y 8Z 90 91 92 93 94 95 96 97 98 99 9A 9B 9C 9D 9F 9G 9H 9L 9S 9T 9W

Popular Components