Package Check List
Check whether your package contains following items:
Industrail Serial Server x 1 or
Industrial Modbus Gateway x 1 or
Industrial Modbus Concentrator x 1 or
Industrial Protocol Gateway x 1
Hardware Installation Guide with Warranty Card
3-Pin 5.08mm Terminal Block
3-Pin 5.08mm Lockable Terminal Block (DC models only)
RJ-45 to Male DB9 cable
AC Power Cord (EU / US models only)
Foot Rubbers
Rack Mount Kit
Installation Overview
1. Ground the device properly. If you are using the AC model,
you can use the grounding screw next to the AC inlet. Else,
if you are using the DC model, you can use the FG pin in the
terminal block. It is required to connect to the grounds at all
times to ensure overall maximum performance.
2. If you opt to place the device on a rack, your will need to
secure the rack mounts kit on to the device before placing it
on the rack. If you opt to place the device on a surface, you
can put on the foot rubbers to prevent the device from
sliding.
3. You can then choose whether to plug in the I/O ports at this
point or do it later. Next you can then proceed to connect the
device to the LAN (switch or PC), take care on using the
RJ-45 connector; after this proceed to the device’s settings.
The openings to the sides are for the devices heat
dissipation. Please never obstruct or cover them with any
objects.
Atop Technologies Inc.
Industrial Serial Server
Industrial Modbus Gateway
Industrial Modbus Concentrator
Industrial Protocol Gateway
SE5916/MB5916/PG5916
SE5908/MB5908/PG5908
Panel Layout
Hardware Installation Guide
Version 1.0
Updated in August, 2016
The device server’s factory IP by default is 10.0.50.100. You
can access the device by its WebUI once it is connected to a
physical network or use Serial Manager, for more
information on Serial Manger, please refer to the user
manual. Please be aware that the PC needed for this
procedure needs to be in the same subnet, or you may refer
yourself to the device’s manual on Web UI configuration.
Pin Assignments
*SE/MB/PG5908A has its serial ports 9-16 covered up compared to
SE/MB/PG5916
Serial and RJ-45 Connectors
Ethernet
RS-232
RTS
DTR
(1)
LCM Display
Buttons
Function
RS-422
/4-Wire
RS-485
-
TX-
TX+
SG
SG
RX+
RX-
-
2-Wire
RS-485
-
-
-
SG
SG
Data+
Data-
-
Open Main Menu or go back one level higher
Pin 1
Pin 2
Pin 3
Tx+
Tx-
Rx+
-
-
Rx-
-
-
TXD
SG
SG
RXD
DSR
(1)
Scroll up
Pin 4
Pin 5
Pin 6
Tel: 886-3-5508137
Fax: 886-3-5508131
www.atop.com.tw
www.atoponline.com
P/N:89900499G
Scroll down
Pin 7
Pin 8
(1)
CTS
Confirm the selection. When working with IP
addresses, pressing <SEL> means moving to the
next digit
The isolated models do not have DTR/DSR available.
Serial and Male DB9 Connectors
RS-422
/4-Wire
RS-485
-
TXD+
RXD+
-
SG
-
RXD-
TXD-
-
2-Wire
RS-485
-
-
Data+
-
SG
-
Data-
-
-
Field Maintenance and Service
If the device requires servicing of any kind, you may need
to disconnect and remove it from its mounting. The initial
installation should be done in a way that makes this as
convenient as possible.
Voltage/Power lines should be properly insulated as well
as other cables. Be careful when handling them so as to
not touch each other.
Do not insert under any circumstance objects of any kind
into the heat dissipation holes located in the different
faces of the device. This may not only harm the internal
layout, but might cause harm to the user as well.
Do not under any circumstance open the device for any
reason. Please contact your dealer for any repair needed
or follow the instructions on section of your manual.
Limited Liability
Atop shall not be held responsible for any consequential
losses from using Atop’s product.
Warranty Period
Product Categories
Warranty
Ethernet Switches
Wireless
Serial Device Servers
Modbus Gateways
5 Years
Protocol Gateways
Embedded Device Servers
Media Converters
DIN-Rail Power Supplies
3 Years
Power Adaptors
Antennas
1 Year
Other Accessories
The Warranty Certification will not be effective until an
authorized stamp issued by Atop’s overseas agents.
Purchase Date:
Serial Number:
/
/
(yyyy/mm/dd)
RS-232
Pin 1
Pin 2
Pin 3
Pin 4
Pin 5
Pin 6
Pin 7
Pin 8
Pin 9
DCD
RXD
TXD
DTR
SG
DSR
RTS
CTS
RI
*This cable (RJ-45 to Male DB9) is included in the package.
Warranty Policy
Warranty Conditions
Products supplied by Atop Technologies are covered in this
warranty for sub-standard performance or defective
workmanship. The warranty is not, however, extended to
goods damaged in the
following
circumstances:
(a) Excessive forces or impacts
(b) War or an Act of God: wind storm, fire, flood, electric
shock, earthquake
(c) Use of unqualified power supply, connectors, or
unauthorized parts/kits
(d) Replacement with unauthorized parts
RMA and Shipping Costs Reimbursement
Customers shall always obtain an authorized "RMA" number
from Atop before shipping the goods to be repaired to Atop.
When in normal use, a sold product shall be replaced with a
new one within 3 months after purchase. The shipping cost
from the customer to Atop will be reimbursed by Atop.
After 3 months and still within the warranty period, it is up to
Atop whether to replace the unit with a new one; normally, as
long as a product is under warranty, all parts and labor are
free of charge to the customers.
After the warranty period, the customer shall cover the cost for
parts and labor. Three months after purchase, the shipping
cost from the customer to Atop will not be reimbursed, but the
shipping cost from Atop to the customer will be paid by Atop.
LED Indicators
Name
Power
Color
Green
Status
On
Off
Blinking
Ready
Green
On/Off
Blinking
Off
On
Orange
LAN
Green
Off
Blinking
Off
Message
System is powered on
System is powered off
AP firmware is running
normally
System is not running
normally
Data is transmitting on
COM port
No data is transmitting
Ethernet is connected at
100Mbps
Ethernet is connected at
10Mbps or Disconnected
Data is transmitting on
this port
Ethernet is Disconnected
COM
Green
ATOP Customer Services and Supports
1. Please contact your local dealers or Atop Technical Support
Center at the following numbers.
+886-3-550-8137 (Atop Taiwan)
+86-21-6495-6232 (Atop China)
2. Please report the defected problems via Atop’s Web site or
E-mail account
Web Site:www.atop.com.tw e-mail:
service@atop.com.tw
Web Site:www.atop.com.cn e-mail:
service@atop.com.cn
-Any changes to this material will be announced on Atop website.-
京公网安备 11010802033920号
EEWORLD
