This product has been retired and is not recommended for designs. For new and current designs, S29JL064H (for TSOP packages) and S29PL064J (for FBGA packages) supersede
AM29DL640G as the factory-recommended migration path. Please refer to each respective datasheets for specifications and ordering information. Availability of this document is retained
for reference and historical purposes only.
DISTINCTIVE CHARACTERISTICS
ARCHITECTURAL ADVANTAGES
■
Simultaneous Read/Write operations
— Data can be continuously read from one bank while
executing erase/program functions in another bank.
— Zero latency between read and write operations
■
Flexible Bank
TM
architecture
— Read may occur in any of the three banks not being
written or erased.
— Four banks may be grouped by customer to achieve
desired bank divisions.
■
Boot Sectors
— Top and bottom boot sectors in the same device
— Any combination of sectors can be erased
■
Manufactured on 0.17 µm process technology
■
SecSi™ (Secured Silicon) Sector: Extra 256 Byte
sector
—
Factory locked and identifiable:
16 bytes available for
secure, random factory Electronic Serial Number;
verifiable as factory locked through autoselect
function. ExpressFlash option allows entire sector to
be available for factory-secured data
—
Customer lockable:
One-time programmable only.
Once locked, data cannot be changed
■
Zero Power Operation
— Sophisticated power management circuits reduce
power consumed during inactive periods to nearly
zero.
■
Compatible with JEDEC standards
— Pinout and software compatible with
single-power-supply flash standard
■
Ultra low power consumption (typical values)
— 2 mA active read current at 1 MHz
— 10 mA active read current at 5 MHz
— 200 nA in standby or automatic sleep mode
■
Minimum 1 million erase cycles guaranteed per
sector
■
20 year data retention at 125°C
— Reliable operation for the life of the system
SOFTWARE FEATURES
■
Data Management Software (DMS)
— AMD-supplied software manages data programming,
enabling EEPROM emulation
— Eases historical sector erase flash limitations
■
Supports Common Flash Memory Interface (CFI)
■
Erase Suspend/Erase Resume
— Suspends erase operations to allow reading from
other sectors in same bank
■
Data# Polling and Toggle Bits
— Provides a software method of detecting the status of
program or erase cycles
■
Unlock Bypass Program command
— Reduces overall programming time when issuing
multiple program command sequences
HARDWARE FEATURES
■
Ready/Busy# output (RY/BY#)
— Hardware method for detecting program or erase
cycle completion
■
Hardware reset pin (RESET#)
— Hardware method of resetting the internal state
machine to the read mode
■
WP#/ACC input pin
— Write protect (WP#) function protects sectors 0, 1,
140, and 141, regardless of sector protect status
— Acceleration (ACC) function accelerates program
timing
■
Sector protection
— Hardware method of locking a sector, either
in-system or using programming equipment, to
prevent any program or erase operation within that
sector
— Temporary Sector Unprotect allows changing data in
protected sectors in-system
Publication#
25693
Rev:
B
Amendment
5
Issue Date:
June 6, 2005
PACKAGE OPTIONS
■
63-ball Fine Pitch BGA
■
64-ball Fortified BGA
■
48-pin TSOP
PERFORMANCE CHARACTERISTICS
■
High performance
— Access time as fast as 70 ns
— Program time: 4 µs/word typical utilizing Accelerate
function
Refer to AMD’s Website (www.amd.com) for the latest information.
GENERAL DESCRIPTION
The Am29DL640G is a 64 megabit, 3.0 volt-only flash
memory device, organized as 4,194,304 words of 16
bits each or 8,388,608 bytes of 8 bits each. Word
mode data appears on DQ15–DQ0; byte mode data
appears on DQ7–DQ0. The device is designed to be
programmed in-system with the standard 3.0 volt V
CC
supply, and can also be programmed in standard
EPROM programmers.
The device is available with an access time of 70, 90,
or 120 ns and is offered in 48-pin TSOP, 63-ball
Fine-Pitch BGA, and 64-ball Fortified BGA packages.
Standard control pins—chip enable (CE#), write en-
able (WE#), and output enable (OE#)—control normal
read and write operations, and avoid bus contention
issues.
The device requires only a
single 3.0 volt power sup-
ply
for both read and write functions. Internally gener-
ated and regulated voltages are provided for the
program and erase operations.
Factory locked parts provide several options. The
SecSi Sector may store a secure, random 16 byte
ESN (Electronic Serial Number), customer code (pro-
grammed through AMD’s ExpressFlash service), or
both. Customer Lockable parts may utilize the SecSi
Sector as bonus space, reading and writing like any
other flash sector, or may permanently lock their own
code there.
DMS (Data Management Software)
allows systems
to easily take advantage of the advanced architecture
of the simultaneous read/write product line by allowing
removal of EEPROM devices. DMS will also allow the
system software to be simplified, as it will perform all
functions necessary to modify data in file structures,
as opposed to single-byte modifications. To write or
update a particular piece of data (a phone number or
configuration data, for example), the user only needs
to state which piece of data is to be updated, and
where the updated data is located in the system. This
i s a n a d va n t a g e c o m p a r e d t o s y s te m s w h e r e
user-written software must keep track of the old data
location, status, logical to physical translation of the
data onto the Flash memory device (or memory de-
vices), and more. Using DMS, user-written software
does not need to interface with the Flash memory di-
rectly. Instead, the user's software accesses the Flash
memory by calling one of only six functions. AMD pro-
vides this software to simplify system design and soft-
ware integration efforts.
The device offers complete compatibility with the
JEDEC single-power-supply Flash command set
standard.
Commands are written to the command
register using standard microprocessor write timings.
Reading data out of the device is similar to reading
from other Flash or EPROM devices.
The host system can detect whether a program or
erase operation is complete by using the device
sta-
tus bits:
RY/BY# pin, DQ7 (Data# Polling) and
DQ6/DQ2 (toggle bits). After a program or erase cycle
has been completed, the device automatically returns
to the read mode.
The
sector erase architecture
allows memory sec-
tors to be erased and reprogrammed without affecting
the data contents of other sectors. The device is fully
erased when shipped from the factory.
Hardware data protection
measures include a low
V
CC
detector that automatically inhibits write opera-
tions during power transitions. The
hardware sector
protection
feature disables both program and erase
operations in any combination of the sectors of mem-
ory. This can be achieved in-system or via program-
ming equipment.
The device offers two power-saving features. When
addresses have been stable for a specified amount of
time, the device enters the
automatic sleep mode.
The system can also place the device into the
standby mode.
Power consumption is greatly re-
duced in both modes.
Simultaneous Read/Write Operations with
Zero Latency
The Simultaneous Read/Write architecture provides
simultaneous operation
by dividing the memory
space into
four banks,
two 8 Mb banks with small and
large sectors, and two 24 Mb banks of large sectors.
Sector addresses are fixed, system software can be
used to form user-defined bank groups.
During an Erase/Program operation, any of the three
non-busy banks may be read from. Note that only two
banks can operate simultaneously. The device can im-
prove overall system performance by allowing a host
system to program or erase in one bank, then
immediately and simultaneously read from the other
bank, with zero latency. This releases the system from
waiting for the completion of program or erase
operations.
The Am29DL640G can be organized as both a top
and bottom boot sector configuration.
Bank
Bank 1
Bank 2
Bank 3
Bank 4
Megabits
8 Mb
24 Mb
24 Mb
8 Mb
Sector Sizes
Eight 8 Kbyte/4 Kword,
Fifteen 64 Kbyte/32 Kword
Forty-eight 64 Kbyte/32 Kword
Forty-eight 64 Kbyte/32 Kword
Eight 8 Kbyte/4 Kword,
Fifteen 64 Kbyte/32 Kword
Am29DL640G Features
The
SecSi™ (Secured Silicon) Sector
is an extra
256 byte sector capable of being permanently locked
by AMD or customers. The
SecSi Indicator Bit
(DQ7)
is permanently set to a 1 if the part is
factory locked,
and set to a 0 if
customer lockable.
This way, cus-
tomer lockable parts can never be used to replace a
It took me a week and several nights to finally set up the ESP-IDF development environment. In order to verify whether there are any problems, I compiled a project to see.After ESP-IDF is installed, m...
Now, there is a problem that occasionally occurs during the use of STM32F429, that is, the system freezes when restarting. This problem will occur whether it is pressing the RESET button, soft restart...
In the figure: ADC and TX pins are two functional interfaces connected to the single chip, but we don’t know how to use them specifically. OUT+ is the positive output of the adjustable power supply, a...
The purpose of this document is to enable users to quickly become familiar with the N32G032 motor control board, understand the control board functions, instructions and precautions, so as to control ...
Class D amplifiers are used to amplify pulsed (digital) signals, which are usually short-lived. Digital technology allows many samples of the input signal to be reproduced at the output (using a sampl...
CBB capacitors and monolithic capacitors have better frequency characteristics , small dielectric loss , wide response range , high insulation impedance, and no polarity.
However, the capacitance of t...
MPU-6050 MPU-6050 is a six-axis motion tracking chip produced by InvenSense, with a chip size of 4×4×0.9mm and a QFN package. It integrates a three-axis gyroscope, a three-axis accelerometer, an ...[Details]
【Abstract】 This paper introduces the software and hardware design of an ultra-low power consumption, low measurement frequency data acquisition system based on the integrated data acquisition chi...[Details]
While the global mobile phone market is still growing at a single-digit rate each quarter, smartphone shipments continue to surge. With the introduction of new generations of mobile phones, smartphon...[Details]
This machine has a 12V BT and can also be 24V. My goal is 800W at 12V, and I strive for 1000W. The overall structure is based on the 3000W machine of Zhong Gong. There is also a large heat sink at ...[Details]
On March 27, the Xiaomi MIX series welcomed a new AI dual-camera flagship phone - Xiaomi MIX 2S. Let's follow the mobile phone portable editor to learn more about it. Xiaomi Mi MIX 2S continu...[Details]
Automotive chips that were originally out of stock have become oversupply warnings. Morgan Stanley Securities pointed out in the latest "Asia-Pacific Automotive Semiconductors" report that due to two...[Details]
Engineers can use logic analyzers to quickly identify problems when measuring digital signals, and Zeroplus logic analyzers also provide a number of patented technologies to help engineers improve wo...[Details]
Using NI CompactRIO, we created a standalone hardware-in-the-loop (HIL) test environment that combines an artificial mechanical heart with a circulatory blood flow model to create a live solution that...[Details]
As various car companies accelerate their deployment in the battery field, various battery projects have achieved breakthrough progress. BYD, Toyota, Panasonic, SK and other manufacturers have added ...[Details]
According to the news from China Unicom’s official Weibo, on July 8, Jiangxi Unicom and Jiangxi Telecom jointly announced that they have achieved continuous 5G coverage in the main urban areas of all...[Details]
A few days ago, the well-known evaluation organization DXOMARK announced the photo score of Xiaomi 12 Pro, with a total score of 131 points, ranking 14th. Last night, DXOMARK announced the p...[Details]
I have not been very clear about various memories before, so let's summarize them today. Memory is divided into two categories: RAM and ROM. I will not talk about RAM, but mainly ROM today. ROM and...[Details]
Following the mobile phone application, Senton Technology launched ultrasonic touch solutions for wearable devices and large displays
Two chip solutions developed specifically for we...[Details]
1.stm8_interrupt_vector.c It will appear automatically for no apparent reason, and all in the project directory. Perform the following operations 2. No default placement for segment .FLASH_CODE enc...[Details]
Domestic Chip Exchange
京公网安备 11010802033920号
EEWORLD
