-
As we all know, graphene batteries have to challenge the high price of "black gold", while hydrogen fuel cells, which came out of the laboratory earlier than graphene batteries, have to overcome the ...[Details]
-
1. Enable GPIO clock: RCC_APB2PeriphClockCmd(uint32_t RCC_APB2Periph, FunctionalState NewState); Parameter Description: For example: 2. Set GPIO parameters: output OR input, working mode, port...[Details]
-
Recently, Junpu stated that through independent research and development and joint research and development with partners, the institute has now formed a series of key kits for humanoid robots, inc...[Details]
-
There will be certain errors when measuring with a multimeter. Some of these errors are the maximum absolute errors allowed by the accuracy level of the instrument itself. Some are human errors caused...[Details]
-
Since RS-422 and RS-485 buses have the characteristics of strong anti-interference ability, high communication rate, long communication distance, and the ability to communicate with multiple slaves, ...[Details]
-
How to use Keysight PXI instruments to run LabVIEW programs (detailed steps) The PXI system provides a high-performance PC-based measurement and automated test platform. In addition to advantages i...[Details]
-
1. Conversion principle of successive approximation ADC The successive approximation AD converter is similar to the counting A/D converter, except that the digital quantity is generated by the "suc...[Details]
-
In the industrial control industry, it is often necessary to collect some data and control actions. If it is achieved through PLC, it is not only expensive, but also has problems with flexibility and ...[Details]
-
Recently, the development of the pneumonia epidemic caused by the novel coronavirus has touched the hearts of all Chinese people. As a key state-owned enterprise related to national energy security...[Details]
-
According to Reuters, autonomous driving sensor startup Luminar said it will provide lidar sensors to Intel's Mobileye. Luminar said its lidar will be integrated into Mobileye's self-driving hardwar...[Details]
-
Standard serial digital buses such as I2C enable simple and efficient communication with digitally-enabled DC/DC converters, while emerging standards such as PMBus facilitate component interoperabili...[Details]
-
On August 3, ProLogium announced that the European Commission approved the French government’s funding of 1.5 billion euros to ProLogium. The funding will be used for the solid-state battery factory ...[Details]
-
The working characteristics of the sensor are directly reflected by its static and dynamic characteristics. The static characteristics represent the input-output relationship of the sensor when each ...[Details]
-
The circuit is shown in the figure. This circuit can obtain a higher output power by simply changing some components. The circuit R1, L1, D1, C1 to C7 on the left side of the figure is a convention...[Details]
-
Step 1: Install IAR for stm8 (omitted) I've been using version 1.31 for over a month and haven't found any problems. Step 2: New Construction 1. Create a new folder test, and then create a user f...[Details]
Download Centre
京公网安备 11010802033920号
EEWORLD