EEWORLDEEWORLDEEWORLD

Part Number

Search

C052C829J2G5CA

Description
CERAMIC MOLDED/AXIAL & RADIAL - STANDARD
File Size135KB,10 Pages
ManufacturerKEMET
Websitehttp://www.kemet.com
Download Datasheet View All

C052C829J2G5CA Overview

CERAMIC MOLDED/AXIAL & RADIAL - STANDARD

CERAMIC MOLDED AXIAL & RADIAL
PERFORMANCE CHARACTERISTICS
GENERAL
Working Voltage:
C0G – 50, 100 & 200 Volts
X7R – 50, 100 & 200 Volts
Temperature Characteristics:
C0G – 0 ±30 PPM/°C from -55°C to +125°C
X7R – ±15% from -55°C to +125°C
Capacitance Tolerance:
C0G – ±0.5 pF, ±1%, ±2%, ±5%, ±10%, ±20%
(±0.5 pF is tightest available tolerance)
X7R – ±10%, ±20%, -0 +100%, -20% +80%
Construction:
Monolithic block of ceramic dielectric with interdigitated
internal electrodes, encapsulated in a molded case, and
having axial or radial leads. Meets flame test requirements
of UL Standard 94V-0.
Terminal Strength:
EIA-198 Method 303 Condition A (2.2 kg)
Insulation Resistance:
C0G – 10K megohms or 100 megohm - µF, whichever
is less
X7R – 10K megohms or 100 megohm - µF, whichever
is less
Dielectric Withstanding Voltage:
250% of rated voltage for 5 seconds with current
limited to 50 mA.
ENVIRONMENTAL
Moisture Resistance:
MIL-STD-202, Method 106, or EIA-198, Method 204,
Condition A, except 20 cycles.
Insulation Resistance:
C0G – 10K megohms or 100 megohm - µF, whichever
is less
X7R – 10K megohms or 100 megohm - µF, whichever
is less
Dielectric Withstanding Voltage:
250% of rated voltage for 5 seconds with current
limited to 50 mA.
Immersion Cycling:
MIL-STD-202, Method 104, Condition B. Post-Test limits
at 25°C are:
Insulation Resistance:
C0G – 10K megohms or 100 megohm - µF, whichever
is less
X7R – 10K megohms or 100 megohm - µF, whichever
is less
Solderability:
MIL-STD-202, Method 208, Sn62 solder, 245°C for 5 ±1/2
seconds.
Resistance to Soldering Heat:
MIL-STD-202, Method 210, Condition B (260°C, 10 secs).
Depth of immersion — to a minimum of .050" from the
capacitor body.
Lead Material:
Axial: Solder-coated copper clad steel
Radial: Solder-coated copper standard; 100% tin plated optional
ELECTRICAL
Capacitance:
Within specified tolerance when measured with 1 volt rms
at 1 kHz (1000 pF or less at 1 MHz for C0G).
Dissipation Factor:
25°C at 1 kHz (1000 pF or less at 1 MHz for C0G).
C0G – .15% maximum
X7R – 2.5% maximum
Insulation Resistance:
After 2 minutes electrification at 25°C and rated voltage
C0G – 100K megohms or 1000 megohm - µF, whichever
is less.
X7R – 100K megohms or 1000 megohm - µF, whichever
is less.
Dielectric Withstanding Voltage:
250% of rated voltage for 5 seconds with current limited
to 50 mA at 25°C.
Life Test:
2000 hours at 200% of rated voltage at 125°C. Post-Test
limits at 25°C are:
Capacitance Change:
C0G – less than 3% or 0.25 pF, whichever is higher
X7R – ±20% of initial value
Dissipation Factor:
C0G – .25% maximum
X7R – 3.0% maximum
20
© KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
Small but powerful
[align=left][color=rgb(85, 85, 85)][font="][size=4] With memory and pin counts continuing to increase, we sometimes hear people ask why we continue to develop and release microcontrollers (MCUs) with ...
fish001 Wireless Connectivity
Exclusive teardown | Innovative application of voice control on true wireless stereo TWS headphones
Event details: Exclusive disassembly | Innovative application of voice control on true wireless stereo TWS headphonesTrue Wireless Stereo (TWS) earphones have finally become an essential accessory for...
EEWORLD社区 Mobile and portable
DIY Indoor Air Quality Monitor
[i=s]This post was last edited by kikiwu on 2019-3-26 18:06[/i] [align=center][size=5][color=#ff8c00][b]DIY Indoor Air Quality Monitor[/b][/color][/size][/align] [align=right][size=4][color=#ff8c00][b...
kikiwu DIY/Open Source Hardware
Infrared receiving circuit and waveform decoding
Infrared receiving circuit and waveform decoding...
fish001 Wireless Connectivity
Please tell me, what is the problem of no response for a long time during burning?
After unpacking, JTAG and UART USB were both plugged into the USB port of the computer. The screen was not lit, but the LED was red. After installing the driver CP210x, the red light turned green. The...
cybertovsky XuanTie RISC-V Activity Zone
Recruiting embedded software development engineers, embedded BSP engineers
Recruiting embedded software development engineers, 150,000 to 300,000 yuan per year, located in Qingdao. Job description: 1. Central air-conditioning embedded software design; 2. Program architecture...
12工程师 Recruitment

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

Datasheet   0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Room 1530, 15th Floor, Building B, No. 18 Zhongguancun Street, Haidian District, Beijing Telephone: (010) 82350740 Postal Code: 100190
Copyright © 2005-2024 EEWORLD.com.cn, Inc. All rights reserved 京ICP证060456号 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号