-
1 Introduction
In large-scale communication signal processing systems and radar signal processing systems, as the scale of devices continues to expand, the requirements for the performance...[Details]
-
You should all be familiar with the serial port. I won’t go into the specific communication principles as there are many discussions on Baidu. Then just look at the functions directly. void Uart_Se...[Details]
-
Introduction
Image-based electronic police systems are currently an effective means of traffic supervision. Their external hardware devices usually include four parts: front-end sensing devices...[Details]
-
Two interrupts are enabled, one for timing and the other for external interrupt. void TIMER0INIT() { T0CON=0B10001000;//1000 0011, PSA=0, division by 16; TMR0L=0xDC; TMR0H=0x0B; //INTCON=0B101000...[Details]
-
Abstract: This article further analyzes the characteristics of TOPSwitch and describes how to obtain an optimal inductor value in design.
Keywords: Leading edge blanking Maximum duty cy...[Details]
-
The 2019 Shanghai Intelligent Manufacturing Promotion Conference was held, and the "Shanghai Intelligent Manufacturing Action Plan (2019-2021)" was released at the conference. The Action Plan propo...[Details]
-
The third generation of Qualcomm Professional Networking Platform ushers in a new era of 10Gbps Wi-Fi networks for enterprise access points, Wi-Fi mesh networks, carrier gateways and premium home...[Details]
-
New energy technologies such as solar energy and wind energy are widely used, but there are still problems due to the instability of new energy generation, which leads to the limited acceptance capaci...[Details]
-
With the rapid development of the power industry, the construction of power informatization has become increasingly important; especially in severe weather such as snowstorms, earthquakes and other...[Details]
-
How to draw a functional diagram
Function chart (SFC) is a graphical representation method for describing the control process, functions and characteristics of the control system. It is simple...[Details]
-
After Apple achieved impressive performance with its self-developed M1, it is also “striking while the iron is hot” with the next generation of processors. Previously, Apple was expected to release...[Details]
-
There are many sampling methods for oscilloscopes in test and measurement. Today, Ritu Classroom will introduce you to the selection of different sampling methods of oscilloscopes. Default Mode The...[Details]
-
Driving LEDs faces many challenges. For example, the forward voltage will change with changes in temperature and current, and the forward voltage of LEDs from different individuals, batches, and su...[Details]
-
October 31 , 2023 , China - STMicroelectronics ( ST ; ) , a world-leading semiconductor company serving multiple electronic applications, participated in the Singapore International Indu...[Details]
-
When you use the FLUKE network tester DSX2-5000, DSX2-8000 to select the cable type, you will find that the suffixes such as U/UTP, F/UTP, etc. will appear after the cable name. You may not understan...[Details]
PCB Design
京公网安备 11010802033920号
EEWORLD