-
The basic 3-terminal regulator has been a staple in the designer's toolbox for over 30 years, and its basic architecture has not changed significantly. Using a fixed voltage reference, a resistor di...[Details]
-
In the previous section we learned: Introduction to network card drivers and making virtual network card drivers: https://blog.csdn.net/xiaodingqq/article/details/81501393 In this section, we wil...[Details]
-
#include
#define uchar unsigned char
#define uint unsigned int
__CONFIG(0x3B31);
void delay(uint x);
void main()
{
TRISE1=0;
TRISB=0x0f;
RE1=0;
while(1)
{
if(RB0==0)
{
delay...[Details]
-
Compared with injection molding, what are the advantages and disadvantages of blow molding? Compared with injection molding, extrusion blow molding has the following advantages.
(1) The cost o...[Details]
-
Use drag soldering!
Operation of SSOP
The effect after welding
Lots of rosin on the surface
Alcohol cleaning
The final result
...[Details]
-
I was introduced to virtual surround sound technology in 1999. This technology can produce Dolby multi-channel effects with only two speakers. You can feel the sound from the front, back, left, and ri...[Details]
-
After power on, the oscillator starts to oscillate, and the output VF signal is transformed and shaped by the RS trigger to generate a rectangular pulse excitation voltage that maintains the origin...[Details]
-
1 Introduction
With the development of electronic power technology, the power supply requirements for electronic components are becoming more and more demanding. Generally, the power supply of...[Details]
-
The limited bipolar control method adopted by the full-bridge inverter is to make the two switch tubes of one bridge arm, such as V1 and V3, work in PWM mode, and the two switch tubes v2 and V4 of ...[Details]
-
At this moment, the oscilloscope screen shows a trigger waveform of a LIN protocol. We want to store this waveform. How can we do it? The ZDS2022 oscilloscope is designed with the user in mind and ...[Details]
-
The microcontroller source program is as follows: #include reg52.h #include intrins.h typedef unsigned char uchar8; typedef unsigned short uint16; typedef unsigned long uint32; bit Bee_flag = 0...[Details]
-
Heilind Electronics, an authorized distributor of professional interconnect and electromechanical products, recently announced the further expansion of its existing product line, adding Pomona Electr...[Details]
-
Testing is an essential part of ensuring product quality. Manufacturers need more accurate, flexible and economical testing systems. The faster the industry develops and the more widely used the produ...[Details]
-
Working status of ARM processor In the ARM architecture, it can work in three different states: ARM state, Thumb state and Thumb-2 state, and debug state. The Embedded System Development and Applic...[Details]
-
Continental Automotive held a technical test drive event "TechRide" for the news media in February 2010. It announced the next-generation ESC (side slip control) "MK100ESC" and a new safety sensor ...[Details]