-
On October 11, 2024, Hunan Zhongnan Intelligent Equipment Co., Ltd. entered a new stage of development - Zhongnan Intelligent Industrial Park was officially put into production. Chen Haibo, Secretary ...[Details]
-
On the factory floor, communication uptime in the manufacturing process is a top priority. And, ensuring supply chain processes remain uninterrupted is also a top priority for any business. Corporate...[Details]
-
More and more applications, such as process control and weighing, require high-resolution, high-integration and low-cost ADCs. The new Σ-Δ conversion technology can meet these requirements. However...[Details]
-
This article provides a simple test method. Although it cannot reach the professional level of accuracy, it can roughly measure the resistance and accuracy of thermistors. I hope it can help everyone...[Details]
-
I recently wrote an LPC2387 timer-related application and wrote down the ideas and code for reference. Requirement: LPC2387 implements a timer with a period of 0.5 seconds Idea: Take ...[Details]
-
1. Overall design
The overall block diagram of the system is shown in Figure 1. The system can be composed of three parts: input, output, and control. When the touch screen is pressed, the touch ...[Details]
-
IIS (Inter-IC Sound) was developed by Philips. It is a commonly used audio device interface, mainly used for CD, MD, MP3 and other devices.
S3C2440 has five pins for IIS: IISDO, IISDI, I...[Details]
-
SPI (Serial Peripheral Inte
RF
ace) is a high-speed, full-duplex, synchronous communication bus that only occupies 4 wires on the chip pins, which not only saves the chip pins, but also sa...[Details]
-
In digital oscilloscope technology, there are two commonly used sampling methods: real-time sampling and equivalent sampling. Real-time sampling is usually performed at equal time intervals, and it...[Details]
-
1 Introduction
With the rapid development of my country's economy, the increasing acceleration of urbanization, and the ever-increasing pace of people's lives, more and more people are beg...[Details]
-
introduction
In recent years, with
the rapid development of
computer
technology and
integrated circuit
technology, the most widely used large-screen
display
system...[Details]
-
The 51 microcontroller has two 16-bit timers/counters: Timer 0 (T0 is P3.4) and Timer 1 (T1 is P3.5) The 16 bits mentioned here refer to the 16-bit counting registers inside the timer/counter, whic...[Details]
-
Yonhap News Agency reported that Samsung said on the 22nd that the company has sent more than 300 Korean engineers and workers to China to complete the expansion of its Xi'an factory. Samsung said th...[Details]
-
Introduction Both of them are pseudo instructions: ADR is a pseudo instruction for reading addresses in a small range, and LDR is a pseudo instruction for reading addresses in a large range. The prac...[Details]
-
Why use the STM8 series? When choosing a microcontroller for a project or product, it is imperative that you choose the right one. PIC devices are excellent due to their ongoing production and suppor...[Details]