-
step
To create the STL function block "STL-Conveyor", follow these steps:
1. Open the "Program blocks" folder in the project tree.
2. Double-click "Add new block".
3...[Details]
-
Generally speaking, the three major electrics include: drive motor, electronic control, and transmission; the three small electrics include: high-voltage distribution box PDU, on-board charger OBC,...[Details]
-
0 Introduction
With the continuous development of embedded devices, higher and higher requirements are put forward for communication. FTP (File Transfer Protocol) is one of the earliest s...[Details]
-
Connect the amplitude stabilization link to the circuit, adjust the potentiometer Rp, use an oscilloscope to observe the output waveform of the oscillation circuit, and observe the changes in the ...[Details]
-
1 Introduction
The popularization of centralized heating and the implementation of metered heating are effective means of building energy conservation, but this needs to be achieved through...[Details]
-
In the development and application of single-chip microcomputers, we often use a master-slave control structure. A PC is used as a host computer to control multiple single-chip microcomputer syst...[Details]
-
Today I will share with you a method to measure capacity. The method is very simple. Since we want to measure capacitance, we just take out the multimeter to observe the gear for measuring capacitanc...[Details]
-
describe
The LTC®3803
is
a constant frequency, current mode, flyback controller optimized for driving 6V rated N-channel MOSFETs in high input voltage applications. Constant freque...[Details]
-
Recently, I have been testing the program of single-chip computer communication. One of the achievements is to send characters or strings from the serial port 2 of the battleship board to the serial ...[Details]
-
Recently, Saiwei Intelligence revealed in a reply letter that at this stage, the company's
robot
products do not involve humanoid (bionic) robots, etc., and the revenue accounts for a low p...[Details]
-
Today, high-performance power systems have come a long way, and designers are using multiple input voltages to drive multiple voltage rails for a wide variety of applications. The need to ensure th...[Details]
-
For single-chip microcomputers or embedded systems, buttons are indispensable. I remember when I first started learning 51 single-chip microcomputers, I first came into contact with the button s...[Details]
-
The protocol is based on transmitting with serial port 1 and receiving with serial port 0 on the same MSP430, using two wireless transceiver NRF401 modules.
Initialize the serial port 0 for receivin...[Details]
-
Samsung Electronics held a shareholders meeting on March 16, where Samsung Electronics CEO Dong-jin Koh revealed that Samsung Electronics will not launch new Galaxy Note series devices in the second ...[Details]
-
On October 24, the third Belt and Road Energy Ministers' Meeting entered its second day, with six sub-forums held simultaneously, including green energy innovation and development, accelerating the co...[Details]