I have a small question for you guys: I want to add a PTC resettable fuse to protect a 220V AC to 13.6V DC (1.45A) transformer before it goes through a bridge rectifier and enters the 7812. After the ...
0x00 Introduction
This article tests the SPI of the bare chip and uses a hardware timer to test the stability of the clock. Considering that it is too extravagant to use a hardware timer as a clock in...
The serial port receiving and sending program of MSP430 microcontroller involves multiple registers, which can be configured step by step according to the following steps:1. First, set the used IO por...
[Evaluation of SGP40]-SGP40 temperature and humidity testMeasure the response of the gas sensor under different temperature and humidity conditions. Since this is the third day of testing, the alcohol...
[i=s]This post was last edited by sctf15013896503 on 2020-7-3 11:26[/i]The current epidemic and other issues are an opportunity for all our domestic industries. It can also be said to be an upgrade er...
Can you experts compare the waveforms of two different triggers on an oscilloscope? I mean, I use CH1 trigger first and then CH2 trigger another waveform and then compare them together. Thank you....