Measurement conditions are as follows: standard sensing object, a distance of twice the standard sensing object, and a set distance of half the sensing distance.
DC 3-Wire Models
Model
Item
Sensing surface
Sensing distance
Set distance
Differential travel
Detectable object
Standard sensing
object
Power supply voltage
(operating voltage
range)
Current consumption
Control
output
Indicators
Operation mode
(with sensing object
approaching)
Load
current
Residual
voltage
E2S-W13
E2S-W14
Top
1.6 mm
±15%
0 to 1.2 mm
E2S-Q13
E2S-Q14
Front
E2S-W23
E2S-W24
Top
2.5 mm
±15%
0 to 1.9 mm
E2S-Q23
E2S-Q24
Front
E2S-W15
E2S-W16
Top
1.6 mm
±15%
0 to 1.2 mm
E2S-Q15
E2S-Q16
Front
E2S-W25
E2S-W26
Top
2.5 mm
±15%
0 to 1.9 mm
E2S-Q25
E2S-Q26
Front
10% max. of sensing distance
Ferrous metal (The sensing distance decreases with non-ferrous metal. Refer to
Engineering Data
on page 4.)
Iron, 12
×
12
×
1 mm
Iron, 15
×
15
×
1 mm
Iron, 12
×
12
×
1 mm
Iron, 15
×
15
×
1 mm
Response frequency
*
1 kHz min.
12 to 24 VDC (10 to 30 VDC), ripple (p-p): 10% max.
13 mA max. at 24 VDC (no-load)
NPN open-collector output, 50 mA max. (30 VDC max.)
PNP open-collector output, 50 mA max. (30 VDC max.)
1.0 V max. (under load current of 50 mA with cable length of 1 m)
Operation indicator (orange)
@@3
Models: NO
@@4
Models: NC
Refer to the timing charts under
I/O Circuit Diagrams
on
page 5 for details.
@@5
Models: NO
@@6
Models: NC
Refer to the timing charts under
I/O Circuit Diagrams
on
page 5 for details.
* The response frequency is an average value.
Measurement conditions are as follows: standard sensing object, a distance of twice the standard sensing object, and a set distance of half the sensing distance.
3
E2S
Specifications
Item
Model
Reverse polarity protection, Surge suppressor
Operating:
−25
to 70°C (with no icing or condensation), Storage:
−40
to 85°C (with no icing or condensation)
Operating: 35% to 90% (with no condensation), Storage: 35% to 95% (with no condensation)
E2S-@@@
Protection circuits
Ambient temperature
range
Ambient humidity
range
Voltage influence
Insulation resistance
Dielectric strength
Vibration resistance
Shock resistance
Degree of protection
Connection method
Weight (packed state)
Materials
Case
Accessories
Temperature influence
±15%
max. of sensing distance at 23°C in the temperature range of
−25
to 70°C
±2.5%
max. of sensing distance at rated voltage in rated voltage
±10%
range
50 MΩ min. (at 500 VDC) between current-carrying parts and case
1,000 VAC for 1 min between current-carrying parts and case
Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
I was just chatting casually with Yanyan, and she said, "I saw a lot of tears under a post you posted. Hahahaha, hahaha, it makes me sad to see you like that."
Then we chatted for a while. Actually, f...
See "SPRUFL8B" 2.9 Initialization section
1. Set device pin multiplexing
2. Set PSC (Power and Sleep Control Register) to enable GPIO
3. Set the direction, data, and interrupt control registers to con...
Help regarding microchip Harmony:I am using Microchip's PIC32MX1/2/3 Starter Kit, and the IDE I use is MPLAB X IDE v4.20.Now I have installed Harmony v3 and want to use it directly. In the Harmony tut...
[i=s]This post was last edited by rockafe3in1 on 2020-10-14 18:39[/i]BackgroundRecently, I was fortunate to participate in a survey on the current status and development trends of automotive Ethernet....
Dark Factory
is the literal translation of Dark Factory, which means smart factory. From raw materials to finished products, all processing, transportation and testing are completed in the...[Details]
There are currently three commonly used options:
film
Image Intensifier
Tablet
display screen
1. Film
Needless to say, although it has been a mature tech...[Details]
Example Analysis:
1. The CPU runs under the VLO clock:
This is the slowest clock, running at about 12 kHz. Therefore, we will visualize the LED flashing red slowly at a rate of about every 3...[Details]
Multi-rate simulation
Usually, the simulation models of power electronic control systems built in the Simulink environment are multi-rate simulation models. This is because:
01
...[Details]
A printed circuit board is a printed board that forms point-to-point connections and printed components on a universal substrate according to a predetermined design. Its main function is to connect v...[Details]
Instrument practitioners know that there are many factors that affect flow sensors for flow measurement instruments, and the principles of flow measurement are different. Among the types of instrument...[Details]
1.Choose the installation method
There are two installation methods for fixed ultrasonic flowmeter sensors: V method and Z method.
V-method: For pipes with a diameter of DN15mm-200mm, the V-m...[Details]
Video surveillance is an important part of the security system, including front-end cameras, transmission cables, and video surveillance platforms. Cameras can be divided into network digital came...[Details]
I just finished a video recently, trying to explore the future of the entire L4 autonomous driving enterprise after the U.S. stock market correction. Well, Ford immediately fired the first shot - Arg...[Details]
On the morning of September 2, Microsoft announced today that it will replace the user interface design of its Mac version of Outlook mail application, and also announced several other improvem...[Details]
In the design of general digital/analog converters, the decoding structure usually adopts a segmented structure. In general designs, in order to reduce delay, latches are usually used, and complex ...[Details]
On August 15, according to foreign media reports, Apple is developing a new computing platform, including a "desktop robot" with an estimated price of about US$1,000 (approximately RMB 7,138).
...[Details]
To use a low-cost 32-bit processor, developers face two choices: processors based on the Cortex-M3 core or the ARM7TDMI core. How to make a choice? What are the selection criteria? This article mainly...[Details]
0 Introduction
The boiler automatic control system is a typical process control system with large inertia, large lag and multiple variables. It involves the detection and control of multip...[Details]
Domestic Chip Exchange
京公网安备 11010802033920号
EEWORLD
