Measurement conditions are as follows: standard sensing object, a distance of twice the standard sensing object, and a set distance of half the sensing distance.
DC 3-Wire Models
Model
Item
Sensing surface
Sensing distance
Set distance
Differential travel
Detectable object
Standard sensing
object
Power supply voltage
(operating voltage
range)
Current consumption
Control
output
Indicators
Operation mode
(with sensing object
approaching)
Load
current
Residual
voltage
E2S-W13
E2S-W14
Top
1.6 mm
±15%
0 to 1.2 mm
E2S-Q13
E2S-Q14
Front
E2S-W23
E2S-W24
Top
2.5 mm
±15%
0 to 1.9 mm
E2S-Q23
E2S-Q24
Front
E2S-W15
E2S-W16
Top
1.6 mm
±15%
0 to 1.2 mm
E2S-Q15
E2S-Q16
Front
E2S-W25
E2S-W26
Top
2.5 mm
±15%
0 to 1.9 mm
E2S-Q25
E2S-Q26
Front
10% max. of sensing distance
Ferrous metal (The sensing distance decreases with non-ferrous metal. Refer to
Engineering Data
on page 4.)
Iron, 12
×
12
×
1 mm
Iron, 15
×
15
×
1 mm
Iron, 12
×
12
×
1 mm
Iron, 15
×
15
×
1 mm
Response frequency
*
1 kHz min.
12 to 24 VDC (10 to 30 VDC), ripple (p-p): 10% max.
13 mA max. at 24 VDC (no-load)
NPN open-collector output, 50 mA max. (30 VDC max.)
PNP open-collector output, 50 mA max. (30 VDC max.)
1.0 V max. (under load current of 50 mA with cable length of 1 m)
Operation indicator (orange)
@@3
Models: NO
@@4
Models: NC
Refer to the timing charts under
I/O Circuit Diagrams
on
page 5 for details.
@@5
Models: NO
@@6
Models: NC
Refer to the timing charts under
I/O Circuit Diagrams
on
page 5 for details.
* The response frequency is an average value.
Measurement conditions are as follows: standard sensing object, a distance of twice the standard sensing object, and a set distance of half the sensing distance.
3
E2S
Specifications
Item
Model
Reverse polarity protection, Surge suppressor
Operating:
−25
to 70°C (with no icing or condensation), Storage:
−40
to 85°C (with no icing or condensation)
Operating: 35% to 90% (with no condensation), Storage: 35% to 95% (with no condensation)
E2S-@@@
Protection circuits
Ambient temperature
range
Ambient humidity
range
Voltage influence
Insulation resistance
Dielectric strength
Vibration resistance
Shock resistance
Degree of protection
Connection method
Weight (packed state)
Materials
Case
Accessories
Temperature influence
±15%
max. of sensing distance at 23°C in the temperature range of
−25
to 70°C
±2.5%
max. of sensing distance at rated voltage in rated voltage
±10%
range
50 MΩ min. (at 500 VDC) between current-carrying parts and case
1,000 VAC for 1 min between current-carrying parts and case
Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
[align=left]With the rapid development of communication technology, the role of the network in daily work is becoming more and more important, and Ethernet has gradually become the communication basis...
[i=s]This post was last edited by bjemt on 2018-12-24 17:42[/i] I downloaded the Android phone App RAPID-IOT-1.1.5.apk from the NXP website and installed it on a Huawei M9 phone (Android 8). The App w...
Dear experts, what is the principle of the single-open dual-control touch switch controlled by a single-chip microcomputer sold on Taobao? Single-open single-control is simple, but how is single-open ...
What is jitter and phase noise?Jitter reflects the time deviation of a digital signal from its ideal position. The bit period of high-frequency digital signals is very short, usually in the hundreds o...
On April 4, Reuters reported that ByteDance has told an Indian court that it is illegal for the government to freeze its bank accounts while investigating possible tax evasion. ByteDance reduced its...[Details]
As climate change and environmental sustainability become more and more important, horticultural automation has ushered in unprecedented opportunities. Recently, Scythe Robotics has expanded its pr...[Details]
Inspired by spider webs in nature, researchers at Delft University of Technology in the Netherlands have combined nanotechnology and machine learning to successfully design an extremely precise micro...[Details]
Many microcontroller-based systems have both analog and digital signals. Even systems that appear to be completely digital are not completely digital because of analog effects such as ringing and cro...[Details]
This article will briefly explain how to expand the RAM of the 51 microcontroller. In order to avoid expanding the RAM in the future, I will expand the RAM to 64KB in one step. 1. Schematic diagram...[Details]
Yes, I am still struggling with Tesla AI DAY. The most complex and difficult to understand part of AI DAY was probably the visual architecture presented by Andrej Karpathy. How does the image obtaine...[Details]
As an international standard fieldbus, PROFIBUS-DP has been widely used in the world for its flexibility, reliability and other advantages. It is a high-performance industrial control network. However...[Details]
Everyone knows the positive and negative poles of diodes . Generally, the positive and negative poles are directly indicated on the diode. When you see the white coil on the tube shell, it is the neg...[Details]
According to Core Technology News (Text/Li Taihong), research organization IDC released the global smartphone foundry survey for the fourth quarter of 2018. In terms of foundry rankings, Hon Hai over...[Details]
Alchip Technologies will become the first dedicated ASIC company to announce 5nm commercial design readiness and accept 5nm design service commissions, with the first test chips expected to be availa...[Details]
In the home appliance market, there is a strong demand for energy and water conservation worldwide. Government decrees and recommendations are redefining an era of energy conservation and rational ...[Details]
A soft start controller is a control device used for starting a motor. It controls the starting current and starting time of the motor to achieve smooth starting of the motor, reduce the impact of ...[Details]
Due to the recent cold wave and snowstorm in the United States, Samsung Electronics' wafer factory in Austin, Texas, was short of electricity and had to be temporarily closed. According to the latest...[Details]
On October 28, Zheng Mao, Party Secretary and Executive Director of Datang Jiangxi New Energy Company, Huang Faliang, Member of the Standing Committee of the Ruijin Municipal Party Committee and De...[Details]