CENTIGRID
®
ESTABLISHED RELIABILITY
RELAYS
SENSITIVE DPDT
SERIES
134
ESTABLISHED RELIABILITY
SERIES
DESIGNATION
134
134D
134DD
DPDT basic relay
RELAY TYPE
DPDT relay with internal diode for coil transient suppression
DPDT relay with internal diodes for coil transient suppression and polarity
reversal protection
INTERNAL CONSTRUCTION
DESCRIPTION
The 134 sensitive Centigrid
®
relay retains the same features as the 114
standard Centigrid
®
relay with only a minimal increase in profile height (.375
in.). Its .100-inch grid spaced terminals, which preclude the need for spreader
pads, and its low profile make the 134 relay ideal for applications where high
packaging density is important.
The following unique construction features and manufacturing techniques
provide excellent resistance to environmental extremes and overall high
reliability:
• All welded construction.
• Unique uni-frame design providing high magnetic efficiency and mechanical
rigidity.
• High force/mass ratios for resistance to shock and vibration.
• Advanced cleaning techniques provide maximum assurance of internal
cleanliness.
• Precious metal alloy contact material with gold plating assures excellent
high current and dry circuit switching capabilities.
The Series 134D and 134DD have internal discrete silicon diodes for coil
suppression and polarity reversal protection.
The sensitive 134 Centigrid
®
relay has a high resistance coil, thus requiring
extremely low operating power (200 mw typical). The advantages of reduced
heat dissipation and power supply demands are a plus.
By virtue of its inherently low intercontact capacitance and contact circuit
losses, the 134 relay has proven to be an excellent ultraminiature RF switch
for frequency ranges well into the UHF spectrum. A typical RF application for
the Centigrid
®
relay is in handheld radio transceivers, wherein the combined
features of good RF performance, small size, low coil power dissipation and
high reliability make it a preferred method of Transmit-Receive switching (see
Figure 1).
UPPER
STATIONARY
CONTACT
UNI-FRAME
ARMATURE
LOWER
STATIONARY
CONTACT
MOVING
CONTACT
ENVIRONMENTAL AND
PHYSICAL SPECIFICATIONS
Temperature
(Ambient)
Vibration
(General Note 1)
Shock
(General Note 1)
Acceleration
Enclosure
Weight
134 Page 1
–65°C to +125°C
30 g’s to 3000 Hz
75 g’s,
6 msec, half-sine
50 g’s
Hermetically sealed
0.15 oz. (4.3g) max.
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE
www.teledynerelays.com
©2004 TELEDYNE RELAYS
134/0704/Q1
SERIES 134
GENERAL ELECTRICAL SPECIFICATIONS (–65°C to +125°C unless otherwise noted) (Notes 2 & 3)
Contact Arrangement
Rated Duty
Contact Resistance
Contact Load Ratings (DC)
(See Fig. 2 for other DC
resistive voltage/current ratings)
Contact Load Ratings (AC)
2 Form C (DPDT)
Continuous
0.1 ohm max. before life; 0.2 ohm max. after life at 1A/28Vdc (measured 1/8" from header)
Resistive:
Inductive:
Lamp:
Low Level:
Resistive:
1 Amp/28Vdc
200 mA/28Vdc (320 mH)
100 mA/28Vdc
10 to 50 µA/10 to 50mV
250 mA/115Vac, 60 and 400 Hz (Case not grounded)
100 mA/115Vac, 60 and 400 Hz (Case grounded)
ESTABLISHED RELIABILITY
Contact Life Ratings
Contact Overload Rating
Contact Carry Rating
Coil Operating Power
Operate Time
Release Time
Contact Bounce
Intercontact Capacitance
Insulation Resistance
Dielectric Strength
Negative Coil Transient (Vdc)
Diode P.I.V. (Vdc)
10,000,000 cycles (typical) at low level
1,000,000 cycles (typical) at 0.5A/28Vdc resistive
100,000 cycles min. at all other loads specified above
2A/28Vdc Resistive (100 cycles min.)
Contact factory
200 milliwatts typical at nominal rated voltage @ 25°C
4.0 msec max. at nominal rated coil voltage
134 Series: 2.0 msec max. 134D, 134DD Series: 7.5 msec max.
1.5 msec max.
0.4 pf typical
10,000 megohms min. between mutually isolated terminals
Atmospheric pressure: 500 Vrms/60Hz
70,000 ft.: 125 Vrms/60Hz
134D, 134DD
1.0 max
134D, 134DD
100 min.
DETAILED ELECTRICAL SPECIFICATIONS (–65°C to +125°C unless otherwise noted) (Note 3)
BASE PART
NUMBERS
(See Note 8 for full P/N example)
Coil Voltage (Vdc)
Coil Resistance
(Ohms ±10% @25°C)
Coil Current (mAdc @25°C)
(134DD Series)
Pick-up Voltage (Vdc, Max.)
Nom.
Max.
134, 134D
134DD (Note 4)
Min.
Max.
134, 134D
134DD
Min.
134, 134D
Max.
Min.
134DD
Max.
134-5
134D-5
134DD-5
5.0
7.5
100
64
56.8
78.1
3.5
3.7
0.12
2.5
0.7
2.6
134-6
134D-6
134DD-6
6.0
10.0
200
125
36.3
48.9
4.5
4.8
0.18
3.2
0.8
3.0
134-9
134D-9
134DD-9
9.0
15.0
400
400
18.1
23.6
6.8
8.0
0.35
4.9
0.9
4.5
134-12
134D-12
134DD-12
12.0
20.0
800
800
12.5
16.0
9.0
11.0
0.41
6.5
1.0
5.8
134-18
134D-18
134DD-18
18.0
30.0
1600
1600
9.6
12.2
13.5
14.5
0.59
10.0
1.1
9.0
134-26
134D-26
134DD-26
26.5
40.0
3200
3200
7.2
9.0
18.0
19.0
0.89
13.0
1.3
13.0
Drop-out Voltage (Vdc)
PERFORMANCE CURVES
(NOTE 2)
TYPICAL RF PERFORMANCE
0
.1
.2
.3
.4
dB
INSE
RTIO
N
TYPICAL DC CONTACT RATING (RESISTIVE)
LOS
S
300
LOAD VOLTAGE (VDC)
250
200
150
100
50
10
20
30
40
50
60
70
.01
0.5
IS
R
RETU
W R)
S (VS
N LOS
SS C
CRO
S
ACT
ONT
S
POLE
1.92
1.22
1.02
1.01
1.00
1.00
.5
1.0
VSWR
1.07
A
TION
OLA
N
ATIO
ISOL
SS
ACRO
.1
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
FREQUENCY (GHz)
LOAD CURRENT (AMPS DC)
FIGURE 1
©2003 TELEDYNE RELAYS
FIGURE 2
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE
www.teledynerelays.com
134 Page 2
134/1203/Q1
SERIES 134
OUTLINE DIMENSIONS
CASE DETAIL
.375 (9.53)
SQ. MAX.
.335 (8.51)
SQ. MAX.
TERMINAL LOCATIONS
(Viewed from Terminals; Numbers for Reference Only)
.031
±.003
(.79
±.08)
SCHEMATIC DIAGRAMS
.035
±.010
(.89
±.25)
8
134
.375 (9.53) MAX.
7
6
1
2
3
.100
±.010
(2.54
±.25)
TYP 8 PLACES
WIRE LEAD .750 (19.05) MIN.
PIN: .187 (1.75)
±.010
(.25)
(See Note 5)
.017 (.43)
+.002 (.05)
DIA.
–.001 (.03)
5
4
ESTABLISHED RELIABILITY
DIMENSIONS ARE SHOWN IN INCHES (MILLIMETERS)
134D
GENERAL NOTES
1. Relay contacts will exhibit no chatter in excess of 10 µsec or transfer in excess of 1 µsec.
2. “Typical” characteristics are based on available data and are best estimates. No on-going
verification tests are performed.
3. Unless otherwise specified, parameters are initial values.
4. For reference only. Coil resistance not directly measurable at relay terminals due to
internal series diode in 134DD only.
5. Unless otherwise specified, relays will be supplied with either gold-plated or solder-
coated leads.
6. The slash and characters appearing after the slash are not marked on the relay.
7. Screened HI-REL versions available. Contact factory.
8.
Teledyne Part Numbering System for
T
2
R
®
Established Reliability Relay
ER
134 Z
M4 - 26
A / S Q
Q= Solder-Coated Leads
G= Gold-Plated Leads
(Notes 5 and 6)
S= .187" leads
(Note 6)
Screening and Reliability
Level
Coil Voltage
Teledyne Part Numbering System for Military Qualified (JAN) Relays
J
134 Z
M4 - 26
P
L
Screening and Reliability
Level
Terminal Variant
P = 0.187"
Coil Voltage
134DD
SCHEMATICS ARE VIEWED
FROM TERMINALS
Established Reliability
Designator
Relay Series
Ground Pin Option
(See Appendix)
Pad Option
(See Appendix)
Military (JAN)
Designator
Relay Series
Ground Pin Option
(See Appendix)
Pad Option
(See Appendix)
134 Page 3
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE
www.teledynerelays.com
©2004 TELEDYNE RELAYS
134/0704/Q1
Electronics Design Contest
京公网安备 11010802033920号
EEWORLD
