Poly-Pad K-4
®
Polyester-Based,Thermally Conductive Insulation Material
Features and Benefits
• Thermal impedance:
0.95°C-in
2
/W (@50 psi)
• Polyester based
• For applications requiring non-silicone
conformal coatings
• Designed for silicone-sensitive applications
• Excellent dielectric and physical strength
PROPERTY
Color
Reinforcement Carrier
Thickness (inch) / (mm)
Hardness (Shore A)
Breaking Strength (lbs/inch) / (kN/m)
Elongation (%)
Tensile Strength (psi) / (MPa)
Continuous Use Temp (°F) / (°C)
ELECTRICAL
Dielectric Breakdown Voltage (Vac)
Dielectric Constant (1000 Hz)
Volume Resistivity (Ohm-meter)
Flame Rating
THERMAL
Thermal Conductivity (W/m-K)
THERMAL PERFORMANCE vs PRESSURE
Pressure (psi)
TO-220 Thermal Performance (°C/W)
Thermal Impedance (°C-in /W) (1)
2
TYPICAL PROPERTIES OF POLY-PAD K-4
IMPERIAL VALUE
Tan
Polyimide
0.006
90
30
40
5000
-4 to 302
6000
5.0
10
12
METRIC VALUE
Tan
Polyimide
0.152
90
5
40
34
-20 to 150
6000
5.0
10
12
TEST METHOD
Visual
—
ASTM D374
ASTM D2240
ASTM D1458
ASTM D412
ASTM D412
—
ASTM D149
ASTM D150
ASTM D257
U.L.94
ASTM D5470
V-O
0.9
10
5.64
1.55
25
5.04
1.21
V-O
0.9
50
4.34
0.95
100
3.69
0.70
200
3.12
0.46
Poly-Pad K-4 is a composite of film coated with
a polyester resin.The material is an economical
insulator and the film carrier provides excellent
dielectric and physical strength.
Polyester-based, thermally conductive insulators
from Bergquist provide a complete family of
materials for silicone-sensitive applications.
Poly-Pads are ideally suited for applications
requiring conformal coatings or applications
where silicone contamination is a concern
(telecomm and certain aerospace applications).
Poly-Pads are constructed with ceramic-filled
polyester resins coating either side of a fiber-
glass carrier or a film carrier.The Poly-Pad
family offers a complete range of performance
characteristics to match individual applications.
1) The ASTM D5470 test fixture was used.The recorded value includes interfacial thermal resistance.These values are provided for
reference only. Actual application performance is directly related to the surface roughness, flatness and pressure applied.
Typical Applications Include:
• Power supplies
• Motor controls
• Power semiconductors
Configurations Available:
• Sheet form, die-cut parts and roll form
• With or without pressure sensitive adhesive
Building a Part Number
PPK4
–
0.006
– 00
– 11.512 –
NA
Standard Options
Section E
NA = Selected standard option. If not selecting a standard
option, insert company name, drawing number, and
revision level.
_ _ _ = Standard configuration dash number,
11.512 = 11.5" x 12" sheets, 11.5/250 = 11.5" x 250' rolls, or
00 = custom configuration
AC = Adhesive, one side
00 = No adhesive
Standard thicknesses available: 0.006"
PPK4 = Poly-Pad K-4 Material
Section A
Section B
Section C
Note: To build a part number, visit our website at www.bergquistcompany.com.
Sil-Pad
®
: U.S. Patents 4,574,879; 4,602,125; 4,602,678; 4,685,987; 4,842,911 and others
www.bergquistcompany.com
The Bergquist Company -
North American Headquarters
18930 West 78th Street
Chanhassen, MN 55317
Phone: 800-347-4572
Fax: 952-835-0430
The Bergquist Company -
European Headquarters
Netherlands
Phone: 31-35-5380684
Fax: 31-35-5380295
The Bergquist Company -
Asia Headquarters
Hong Kong
Phone: 852-2690-9296
Fax: 852-2690-3408
All statements, technical information and recommendations herein are based on tests we believe to be reliable, and
THE FOLLOWING IS MADE IN LIEU OF ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING THE IMPLIED
WARRANTIES OF MARKETABILITY AND FITNESS FOR PURPOSE. Sellers’ and manufacturers’ only obligation shall be to
replace such quantity of the product proved to be defective. Before using, user shall determine the suitability of the product
for its intended use, and the user assumes all risks and liability whatsoever in connection therewith. NEITHER SELLER NOR
MANUFACTURER SHALL BE LIABLE EITHER IN TORT OR IN CONTRACT FOR ANY LOSS OR DAMAGE, DIRECT,
INCIDENTAL, OR CONSEQUENTIAL, INCLUDING LOSS OF PROFITS OR REVENUE ARISING OUT OF THE USE OR
THE INABILITY TO USE A PRODUCT. No statement, purchase order or recommendations by seller or purchaser not
contained herein shall have any force or effect unless in an agreement signed by the officers of the seller and manufacturer.
PDS_PP K4_1113
Section D
MCU
京公网安备 11010802033920号
EEWORLD
