Type TCX
105 ºC, Axial Leaded Aluminum Electrolytic Capacitors
Extended Life Computer Grade Capacitor
Type TCX is an axial leaded, 105 ºC, 2000 h extended
life industrial and computer grade quality aluminum
electrolytic capacitor with low DCL and ESR and is
suitable for computer applications.
Highlights
•
•
•
105 ºC rated
Computer grade
Low DCL and ESR
Specifications
Capacitance Range:
27 to 12,000 µF
Voltage Range:
10 to 150 WVdc
Capacitance Tolerance:
10 to 75 WVdc, –10 +75%
100 to 150 WVdc, –10 +50%
Operating Temperature Range:
–55 ºC to 105 ºC
DC Leakage Current:
I= 2 √CV after 5 minutes
Not to exceed 2 mA @ 25 ºC
I = leakage current in µA
C = Capacitance in µF
V = Rated voltage
Ripple Current Multipliers:
Rated
Ripple Multipliers
WVdc
0 to 150
Ambient Temp.
Ripple Multiplier
60 Hz
0.8
400 Hz
1.05
1000 Hz
1.10
2400 Hz
1.14
+45 ºC +55 ºC +65 ºC +75 ºC +85 ºC +95 ºC
1.7
1.58
1.4
1.2
1.0
0.7
QA Stability Test:
Apply WVdc for 2,000 h at 105 ºC
• Capacitance change ±15% from initial limits
• DC leakage current meets initial limits
• ESR ≤150% of initial measured value
Outline Drawing
-
1/32 Approx
d
Vent
2.500
±.250
L
±.031
2.500
±.250
Molded
Plastic Seal
+
D
±.015
Parts are supplied with PVC insulating sleeve.
Add .010" to diameter and .125" max
to length to allow for insulation.
(Inches)
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com
Notice and Disclaimer:
All product drawings, descriptions, specifications, statements, information and
data (collectively, the “Information”) in this datasheet or other publication are subject to change. The
customer is responsible for checking, confirming and verifying the extent to which the Information con-
tained in this datasheet or other publication is applicable to an order at the time the order is placed. All
Information given herein is believed to be accurate and reliable, but it is presented without any guaran-
tee, warranty, representation or responsibility of any kind, expressed or implied. Statements of suitability
for certain applications are based on the knowledge that the Cornell Dubilier company providing such
statements (“Cornell Dubilier”) has of operating conditions that such Cornell Dubilier company regards
as typical for such applications, but are not intended to constitute any guarantee, warranty or representa-
tion regarding any such matter – and Cornell Dubilier specifically and expressly disclaims any guarantee,
warranty or representation concerning the suitability for a specific customer application, use, storage,
transportation, or operating environment. The Information is intended for use only by customers who
have the requisite experience and capability to determine the correct products for their application. Any
technical advice inferred from this Information or otherwise provided by Cornell Dubilier with reference
to the use of any Cornell Dubilier products is given gratis (unless otherwise specified by Cornell Dubilier),
and Cornell Dubilier assumes no obligation or liability for the advice given or results obtained. Although
Cornell Dubilier strives to apply the most stringent quality and safety standards regarding the design
and manufacturing of its products, in light of the current state of the art, isolated component failures may
still occur. Accordingly, customer applications which require a high degree of reliability or safety should
employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies
or other appropriate protective measures) in order to ensure that the failure of an electrical component
does not result in a risk of personal injury or property damage. Although all product-related warnings,
cautions and notes must be observed, the customer should not assume that all safety measures are indi-
cated in such warnings, cautions and notes, or that other safety measures may not be required.
AC
4
Analog electronics
京公网安备 11010802033920号
EEWORLD
