To learn more about ON Semiconductor, please visit our website at
www.onsemi.com
Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers
will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor
product management systems do not have the ability to manage part nomenclature that utilizes an underscore
(_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain
device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated
device numbers. The most current and up-to-date ordering information can be found at
www.onsemi.com.
Please
email any questions regarding the system integration to
Fairchild_questions@onsemi.com.
ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right
to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON
Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON
Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s
technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA
Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended
or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out
of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor
is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
ES1A - ES1D
ES1A - ES1D
Features
•
•
•
•
•
•
For surface mount applications.
Glass passivated junction.
Low profile package.
Easy pick and place.
Built-in strain relief.
Superfast recovery times for
high efficiency.
SMA/DO-214AC
COLOR BAND DENOTES CATHODE
Fast Rectifiers
Absolute Maximum Ratings*
Symbol
V
RRM
I
F(AV)
I
FSM
T
stg
T
J
T
A
= 25°C unless otherwise noted
Parameter
Maximum Repetitive Reverse Voltage
Average Rectified Forward Current, @ T
A
=120°C
Non-repetitive Peak Forward Surge Current
8.3 ms Single Half-Sine-Wave
Storage Temperature Range
Operating Junction Temperature
Value
1A
50
1B
100
1C
150
1.0
30
-50 to +150
-50 to +150
1D
200
Units
V
A
A
°C
°C
*
These ratings are limiting values above which the serviceability of any semiconductor device may be impaired.
Reverse Recovery Time Characterstic and Test Circuit Diagram
2010
Fairchild Semiconductor Corporation
ES1A-ES1D, Rev. C1
B
B
5.60
4.80
0.13
M
C B A
2.65
B
1.65
1.20
1.75
4.30
LAND PATTERN RECOMMENDATION
2.95
2.50
A
2.50 MAX
4.75
4.00
TOP VIEW
B
A
2.20
1.90
0.203
0.050
0.30
0.05
0.13
M
C B A
NOTES:
A. EXCEPT WHERE NOTED, CONFORMS
TO JEDEC DO214 VARIATION AC.
B DOES NOT COMPLY JEDEC STANDARD
VALUE.
C. ALL DIMENSIONS ARE IN MILLIMETERS.
D. DIMENSIONS ARE EXCLUSIVE OF
BURRS, MOLD FLASH AND TIE BAR
PROTRUSIONS.
E. DIMENSIONS AND TOLERANCE AS
PER ASME Y14.5-2009.
E. LAND PATTERN STD. DIOM5025X231M
F. DRAWING FILENAME: MKT-DO214ACrev2
C
B
2.05
1.95
SIDE VIEW
8°
0°
R0.15 4X
GAGE PLANE
0.45
0.41
0.15
8°
0°
1.52
0.75
DETAIL A
SCALE 20 : 1
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at
www.onsemi.com/site/pdf/Patent−Marking.pdf.
ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Phone:
303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax:
303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email:
orderlit@onsemi.com
N. American Technical Support:
800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
ON Semiconductor Website: www.onsemi.com
Order Literature:
http://www.onsemi.com/orderlit
For additional information, please contact your local
The motor model is a code used to facilitate business contacts between departments such as users, designers, and manufacturers, and to simplify the description of product names, specifications, and ty...
The design of eCall in automotive applications is still relatively complex for many engineers. Today, let’s talk about how to design enhanced eCall cars more simply and share some RF design expertise ...
DHT11 is controlled by a single bus. I set it as follows: static PIN_State AM2120PinState; static PIN_Handle AM2120PinHandle; PIN_Config AM2120PinTable[] = { Board_DIO22 | PIN_GPIO_OUTPUT_DIS | PIN_IN...
[font=微软雅黑][size=3][color=#ff0000][b]Live Details: [/b][/color][/size][/font][url=https://www.eeworld.com.cn/huodong/TI_C2000_Piccolo_MCU_webinar_20181121/][font=微软雅黑][size=3]TI C2000 Piccolo Single C...
The MakeCode extension for the HTS221 temperature and humidity sensor allows you to use the HTS221 in a graphical way. The extension is ported from the MicroPython driver , retaining the oneshot mode ...
I won’t say more, let’s go straight to the step-by-step pictures. This may be what my friends want to know most.Note the DIP switch settingsvarious settings, file locationSimple default setting parame...
In a building with a large grid structure, due to the particularity of the grid structure and its location in a coastal typhoon-prone area, it is necessary to design a high-speed data acquisition syst...[Details]
Syringe tightness positive pressure tester It uses a 5.7-inch (120×90) single-color LCD touch screen with Chinese menu display. The nominal capacity of the syringe, the lateral force and axial pressu...[Details]
——Interview with Zhang Quan, Chief Engineer of State Grid Energy Research Institute
Our reporter Ma Jia
On December 20, State Grid Corporation of China held a press conference on stabiliz...[Details]
The multimeter measurement method refers to the method of using a multimeter to measure the voltage, current, and resistor values in a circuit to determine faults. Therefore, the multimeter measure...[Details]
On August 31, a small polymer lithium battery production base and sales headquarters project with a total investment of 50 million US dollars was settled in Nantong Development Zone. Wang Wenxian, mem...[Details]
Recently, the State Council issued the "14th Five-Year Plan for National Intellectual Property Protection and Utilization" (hereinafter referred to as the "Plan"), which clarified the guiding ideolog...[Details]
In recent years, automobile intelligence, connectivity, and electrification have developed rapidly, and the demand for chips in automobiles has grown rapidly both in terms of quantity and performance...[Details]
Three-electric system
Core technologies of new energy vehicle control systems
Power battery system: stores energy and provides energy for the motor and electrical components of the ...[Details]
On November 18, Jiangsu Yancheng Economic Development Zone held a concentrated start-up and completion ceremony for electronic information industry projects. According to the news released by Yanch...[Details]
On June 25-26, the 2021 Fifth Jiwei Semiconductor Summit with the theme of "The Heart and the Core are Imprinted, and the Changes are Kunpeng" was officially held in Haicang, Xiamen, and lasted for t...[Details]
Recently, Suiyuan Technology held its second offline product launch event, officially announcing the launch of the second-generation training chip Suisi 2.0, as well as the training accelerator card ...[Details]
Traditionally, PFC (power factor correction) offline power converters are designed with two power stages: The first power stage is usually a boost converter, because in this topology there is ...[Details]
With the development of power electronics technology, high-power and high-current DC power supplies are required in many occasions. The DC fast-controlled power supply used in the magnetic confinem...[Details]
"The country will accelerate the training of graduate students in artificial intelligence" has become a hot topic. The Ministry of Education has announced the registration and approval results of und...[Details]
1 Overview
The concept of micro-total analysis system was proposed by Manz in the early 1990s. It is a micro-detection and analysis system that integrates sample injection, sample processi...[Details]
Motor Drive Control（Motor Control）
京公网安备 11010802033920号
EEWORLD
