CC2640R2F-Q1 Automotive-Qualified SimpleLink 32-bit Arm Cortex-M3 Bluetooth Low Energy Wireless MCU
The automotive industry is undergoing a major transformation to meet consumers’ desire to replace ca...
From the information, we know that the GD32L233C development board has 4 communication serial ports, namely USART0, USART1, USART3 and UART4.
In addition, it is equipped with corresponding serial port...
Qorvo is a well-known RF company. But did you know that Qorvo now also has a place in power solutions?In April 2019, Qorovo announced the acquisition of Active-Semi, a supplier of programmable analog ...
ST60 is a wireless connection chip developed by STMicroelectronics based on 60GHz millimeter wave technology, with the characteristics of high bandwidth, low power consumption, short distance, point-t...
[size=5] Generally speaking, the default configuration is L2. Users can decide whether to configure it as L3 based on their own applications. The most common scenario for setting MSMC to L3 is: MSMC m...
District heating is an important area of regional energy application. "At present, China's district heating industry has huge potential for energy conservation and emission reduction. Through the...[Details]
Liquid crystal display (LCD) is a light modulating device that does not emit light by itself. Therefore, in order to clearly see the display content of the transmissive LCD, a backlight source need...[Details]
The news of Sino-Innovative Aviation’s IPO is still lingering, and the power battery track will once again usher in a bell. On November 18, 2022, Hive Energy Technology Co., Ltd. ("Hive Energy") wa...[Details]
It is quite convenient to drive on the expressway now. You don't have to worry about running out of power and not being able to find a place to charge. On September 4, driver Yang Ze drove through the...[Details]
The structure of LED backlight source and CCFL backlight source is basically the same, the main difference is that LED is a point light source, while CCFL is a line light source. From the long-term...[Details]
We have explained how the host controller sends the device descriptor, and then the device returns the corresponding device descriptor. What is the next step for the host controller? Since there are m...[Details]
How to debug parameters of constant voltage inverter
Debugging the parameters of the constant voltage inverter is an important step to ensure its normal operation and meet the operating requir...[Details]
1 Introduction
In order to solve the environmental pollution caused by industrial development and resolutely implement the sustainable development advocated by the national government, green energy...[Details]
DxoMark announced the selfie evaluation results of Samsung Galaxy Note20 Ultra 5G (Exynos) this week, with a final score of 100 points, and evaluated it as: Another choice for selfie videos. IT H...[Details]
(1) MCS-51 is the mainstream product. (2) MSP430 has strong functions. It is a Flash microcontroller with ultra-low power consumption. It is mainly used in three-meter and ultra-low power consumptio...[Details]
Prerequisites It is convenient to use KEIL5 to develop stm32. Many useless files will be generated in the process of program compilation and connection. For example, after a STM32 project is compiled...[Details]
In medical lighting, in addition to good optical properties, LED light sources also avoid the problem of high temperature rise caused by infrared heat radiation from conventional halogen lamps, which...[Details]
1. Clock source In STM32, there are a total of 5 clock sources, namely HSI, HSE, LSI, LSE, and PLL. ①HSI is a high-speed internal clock, RC oscillator, with a frequency of 8MHz; ②HSE is a high-speed...[Details]
This week, NetEase Auto reported on the current status of electric vehicle projects in Beijing, Taiyuan and other places. In the face of facts and evidence, one cannot help but question the current...[Details]
Abstract:
Based on the sensor interface standard IEEE1451.2, this paper introduces some specific technical points for the realization of wireless networked sensors, proposes a wireless netw...[Details]