Using the 9206 USB Plug-in Card:
This product provides an interface for 'Standalone' Atmel QTouch evaluation kits (such as
EVK1060A) to PC-based applications through a USB port, using I2C-compatible communications.
Details of supported products can be found at
www.atmel.com/9206
Select your required evaluation kit and you will be redirected to the Application Note (detailing how to
connect the USB Plug-in Card to the evaluation kit), PC Software and User Guide.
The USB plug-in card is used to supply external power to the evaluation kits (rather than using the
battery) and to prevent possible damage through cross-powering of external and battery power some
modifications to the evaluation boards are required, as well as removal of the battery. See the related
Application Note for each evaluation kit.
The flex cable 71233-A0 is not required for some evaluation kits and should be removed from J3 when
connecting to those kits.
TM
1x 9206 USBPluginCard
Packed By:
Serial Number:
Date:
Touch Technology Division
Pins 1, 2, 9, 13-18,
27-45, 54-61
not connected
1 Mitchell Point
Ensign Way, Hamble
Southampton SO31 4RF
United Kingdom
Tel: +44 (0)23 8056 5600
Fax:+44 (0)23 8045 3939
© 2008, 2009 Atmel Corporation
All rights reserved
www.atmel.com
touch@atmel.com
REV 100.0709