IDS-16-4
Amphenol
®
Amphenol
®
Tru-Loc
®
Rugged Environment
Connector featuring RADSOK
®
Contacts
Amphenol Industrial Products Group introduces a connection
system family with 1.5 mm socket contacts featuring
Amphenol’s exclusive RADSOK
®
contact system. The new
Tru-Loc connector series is designed to perform in demanding
environments, such as under valve covers on diesel engines
and in high vibration sensor applications.
Tru-Loc features a molded thermoplastic main plug body with
secondary latch and a fluoroelastomer main joint seal that is
resistant to many fluids, including diesel fuel.
The Tru-Loc series includes 2-way, 4-way, and 6-way inline
plugs and receptacles. Our engineering team can also design
this series to mate to a device, sensor, fuel injector, splitter,
pass through connector, and more. Special backshells can
be designed for the 6-way series, and we can meet 150°C
temperatures upon request. These connection systems are
RoHS compliant and seal to IP67 when mated. They are
rated for high vibrations at 32 Grms.
Features:
· 2, 4, or 6 pin connector with 1.5mm RADSOK
®
featured contacts
· Plug body with secondary latch
· Fluoroelastomer main joint seal and silicone rubber wire
seals to support IP67 rating
· Dielectric withstanding voltage is 1600 Vac RMS
· 13 Amp current rating
· Insulation resistance can meet 100 M Ohms
· Mating force less then 70N
· Contact retention between 60~80N
· Operating temperature can meet -40°C to +125°C or
+ 150°C (depending on PN); 100 cycles, 1 hour per cycle
· Durability is 20 mating cycles
www.amphenol-industrial.com
Material Specification
®
Plug with RADSOK Socket Contacts
Plug Body
Wire Seal
Main Joint Seal
Socket Contact
Receptacle with Pin Contacts
Receptacle Body
Pin Contact
Electrical Specifications
Dielectric Withstanding Voltage (Test Voltage)
Current Rating
Insulation Resistance
Mechanical Specifications
Connector Mating Force
Contact Retention
Vibration
Operating Temperature Range
Ingress Protection
Durability (Mating Cycle)
Nylon
Silicone
Fluoroelastomer
Copper Alloy w/ Stainless Steel Hood
Nylon
Copper Alloy
1600 Vac RMS
13 amp (DC) (16 AWG Cable)
100 M Ohms
<70 N (15.7 lb)
Primary Only: 80 N (18.0 lb)
Secondary Only: 60 N (13.5 lb)
32 g RMS
-40°/+125°C or +150°C depending on PN;
100 cycles, 1 hour per cycle
IP67
20 cycles
AIPG Part Number
10-838275-000
10-838275-002
10-707003-002
10-707508-02X(X: A,B,C,D)
10-707516-001
10-707517-001
10-707509-00X(X: A,B,C,D)
10-838137-00D
10-838137-01D
10-730605-002
10-707515-002
10-707515-0M2
10-730179-002
10-730764-002
C10-708354-000
C10-730690-000
*
*
*
Description
2way Plug (Plug Body, Locking Collar, and Main Joint Seal)
2way Plug (Plug Body, Locking Collar, and Main Joint Seal)
4way Plug (Plug Body, Locking Collar, and Main Joint Seal)
6way Plug (Plug Body, Locking Collar, and Main Joint Seal)
2way receptacle
4way receptacle
6way receptacle
Wire seal (silicone)
Wire seal (silicone)
Stamped and formed female socket, Au+PdNi plating
Stamped and formed male pin, Au+ PdNi plating
Machined male pin, Au+PaNi plating
Stamped and formed female socket, Au+PdNi plating
Stamped and formed male pin, Au+ PdNi plating
Size 20 AWG hand crimp tool
Size 16-18 AWG hand crimp tool
Additional Information
125°C
150°C
150°C
4 indexes available, 150°C
150°C
150°C
4 indexes available, 150°C
To be used with insulated wires
with insulation between 1.8-2.5 mm
To be used with insulated wires
with insulation between 1.2-1.8 mm
Crimps to wire from 0.8-1.3 sq. mm
Crimps to wire from 0.8-1.3 sq. mm
Crimps to wire from 0.8-1.3 sq. mm
Crimps to wire from 0.5-0.8 sq. mm
Crimps to wire from 0.5-0.8 sq. mm
Socket Contacts are on reels of 4,200 pieces and pin contacts are on reels of 4000 pieces
For Crimp Information please contact factory
Cable seals are sold separately and must be used in all
cavities and on both sides of the connection system
®
®
For additional information on the Amphe-Power family of connectors with RADSOK
®
Technology, please ask for our RADSOK Catalog (SL-391) or download it from the Catalogs
section of our website.
Notice: Specifications are subject to change without notice. Contact your nearest Amphenol Corporation Sales Office for the latest specifications. All statements, information and data given herein are believed to be accurate and reliable but are presented
without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suggestions concerning possible use of our products are made without representation or warranty that any such use is free of patent infringement and are not
recommendations to infringe any patent. The user should assume that all safety measures are indicated or that other measures may not be required. Specifications are typical and may not apply to all connectors.
For further information on your individual application requirements, contact: Amphenol Corporation
North America:
Amphenol Industrial Operations
180 N. Freeport Drive, Plant 4
Nogales, AZ 85621
Tel: (520) 285-5130
Fax: (520) 285-5134
Email: tech@amphenol-aio.com
Europe:
Amphenol Industrial Operations Europe
Via Barbaiana 5
1-20020 Lainate (MI) Italy
Tel: +39 02 93254.204
Fax: +39 02 93254.444
Email: info@amphenol-aio.com
Middle East:
Amphenol Middle East Enterprises FZE
Office C-37 PO Box 21107
Ajman Free Zone, UAE
Tel: +9 716-7422494
Fax: +9 716-7422941
Email: jhussain@amphenol-industrial.com
Asia:
Amphenol Technology Shenzhen Ltd
Block 5 Fuan 2nd Industrial Park
Dayang Rd, Fuyong Baoan
Baoan, Shenzhen, China 518103
Tel; +86 755 2881 8389
Fax; +86 755 2991 8310
Email: enquiry@amphenol-aio.com
Domestic Chip Exchange
京公网安备 11010802033920号
EEWORLD
