.100" and .100" x .100", .093" Mating Length, Straight, Solder Tails
• Low profile for close board stacking
• Solder stand-offs to facilitate production wave solder
and board cleaning
• Board pin retention feature available
929 Series
• See the Regulatory Information Appendix (RIA) in the
"RoHS Compliance" section of www.3Mconnectors.com
for compliance information.
Date Modified: February 3, 2012
TS-0816-B
Sheet 1 of 2
Physical
Insulation:
Flammability: UL 94V-0
Material: Glass Filled Polyester (PBT) or PCT
Color: Black
Contact:
Wiping Area & Solder Tails: See ordering information
Underplating: 50 μ [ 1.27 μm ] Nickel
Plating:
Material: Copper Alloy
Marking:
None
Electrical
Current Rating:
2.5 A
Insulation Resistance:
> 5 × 10
9
Ω
at 500 V
DC
Withstanding Voltage:
1500 V
RMS
at Sea Level
Environmental
Temperature Rating:
-40°C to +105°C
Process Rating:
PCT Insulator: 260°C per J-STD-020
Moisture Sensitivity Level:
1 (per J-STD-020C) for PCT insulator only
UL File No.: E68080
PBT Insulator: Maximum insulator temperature 191°C for solder wave process only
3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnectors.com
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M
™
Pin Strip Header
.100" and .100" x .100", .093" Mating Length, Straight, Solder Tails
A
( See Note )
.215 Ref
[5.46]
929 Series
A
( See Note )
.115 [2.92]
2X .05 Max
[1.27]
.093 + .008
-.003
0.013
0.056
.100 [2.54]
.015 [0.38]
.110 +.015
-.010
.100 Typ [2.54]
.025
±
.001 Sq Typ
[0.64]
.110 +.015
-.010
.100
±
.003
[2.54]
.100
±
.003
[ 2.54 ]
.100
±
.003
[2.54]
Ο
Ο
.040
±
.003 After Plating
[1.02]
.040
±
.003 After Plating
[ 1.02 ]
C
mm
[Inch]
Tolerance Unless Noted
.0
mm
±.1
.00
±.01
.000
±.005
Recommended Hole Pattern
Note:
A = .10" [2.5] × pin quantity per row. Dimension A is a maximum when the pin strip is cut to length, not when the strip is
broken to length. 2 row parts not recommended to be broken to length.
[ ] Dimensions for Reference Only
Ordering Information
Tin
9X9800-01-XX-XX
Pin Quantity
(01-36)
Plating Suffix:
blank = 100 μ" [2.54 µm] tin-lead,
PBT insulator (RIA E3 & C2 apply)
RK = 200 μ" [5 μm] matte tin,
PCT insulator (RIA E1 & C1 apply)
9X98XX-01-XX-XX
05 = 1 row
15 = 2 row
Board Retention Feature
2 = None
R = Kinked Tails
Gold Plating Suffix
I = 10 μ" [0.25 μm] all over, PBT insulator
(RIA E1 & C1 apply)
EU = 10 μ" [0.25 µm] all over, PCT insulator
(RIA E1 & C1 apply)
Pin Quantity per row
(01-36)
([02-72] ÷ 2)
TS-0816-B
Sheet 2 of 2
Gold
Board Retention Feature
2 = None
R = Kinked Tails
3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnectors.com
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
Important Notice
All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness
is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated
with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order
shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase.
3M MAKES NO OTHER WARRANTIES
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
If this product is defective within the
warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product.
Except
where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of
1. Multiple-source interrupt problem #pragma vector = PORT2_VECTOR __interrupt void port2(void) { switch(P2IV) { case P2IV_P2IFG6: P2IFG &=~BIT6; P1OUT ^= BIT0;break; //LED1 on and off case P2IV_P2IFG...
I recently used the ATSAME54 chip and found a problem. After using the internal crystal oscillator to multiply the frequency to 120MHz (via atmel start online configuration), I downloaded and ran the ...
Modern society is a highly information-based society. The development of multimedia technology has attracted much attention to the acquisition and transmission of image information. Autofocus technolo...
BCM Ultra-high Voltage Bus Converter Moduledescribe
The ultra-high voltage BCM is a family of high efficiency fixed ratio converters that can take 400 - 700V or 500 - 800V inputs and produce an unregu...
Let's look at some of the specific causes of signal degradation in current digital designs. Why are these problems so much more prevalent now than in years past? The answer is speed. In the “old da...[Details]
Internet congestion control has become a hot topic in the current computer network research field. Network congestion is caused by the uneven distribution of network resources and traffic. Congesti...[Details]
The meaning of phase locking is the automatic control of phase synchronization. An automatic control closed-loop system that can complete the phase synchronization of two electrical signals is called...[Details]
The ultrasonic frequency used in spring testing is 2.5MHz or 5MHz. Ultrasonic waves have strong directivity and will produce reflection and refraction at the interface of different materials. Therefor...[Details]
According to the amplitude-frequency and phase-frequency characteristics, the following frequency domain performance indicators of the automatic control system can be listed:
(1) Phase margin ...[Details]
"In the future, ON Semiconductor will use innovative methods to develop technologies, products and solutions around the three areas of automotive, industrial and cloud power to enable key megatrends....[Details]
The library access control system is a control system that ensures the safety of book resources and improves the efficiency and level of library management. Supported by computer technology, network ...[Details]
AIoT, as the name implies, is the integration of artificial intelligence technology (AI) and the Internet of Things (IoT) in applications. At present, the global AIoT industry is in a rising period. ...[Details]
The HT47 series MCU is an 8-bit reduced instruction system (RISC) microcontroller launched by Holtek Semiconductor in recent years. In addition to the unique features of RISC microcontrollers, it has...[Details]
According to Jiwei.com, "industrial rice" MLCC has started a new round of price increase cycle since the second half of last year, led by industry giants Murata, TDK, Samsung Electro-Mechanics, etc. ...[Details]
Research on high-performance processors shows that a new direction to continue Moore's Law is coming. Each generation of processors needs to perform better than the previous generation, which also me...[Details]
1. Design plan The microcontroller AT89C52 is used as the main control chip, and the peripheral clock chip DS12C887 is used. The P0 port of the microcontroller is connected to the DS12C887, the P...[Details]
OFweek Cup · OFweek 2023 China
Robot
Industry Annual Selection (abbreviated as OFweek Robot Awards 2023) is jointly organized by OFweek, China's high-tech industry portal, and its authorita...[Details]
1 Introduction
Temperature monitoring of the isolating contacts of high-voltage switchgear has always been one of the major issues for safe operation of the power industry. However, ...[Details]
1 Introduction
In the future, the country will build a space station. The lighting system is an important subsystem in the space station. Comfortable lighting can provide a good lighting e...[Details]
Microcontroller MCU
京公网安备 11010802033920号
EEWORLD
