STEVAL-MKI210V1K
Data brief
iNemo inertial module kit based on ISM330DHCX
Features
•
•
•
•
•
User friendly ISM330DHCX board
Complete ISM330DHCX pinout for a standard DIL 24 socket
Double-sided adhesives included for easy mounting on equipment to be
measured
Fully compatible with and STEVAL-MKI109V3 motherboard
RoHS compliant
Description
The
STEVAL-MKI210V1
evaluation board has an embedded
ISM330DHCX
3D
accelerometer and 3D gyroscope sensor, which is connected through flat cable to
a simple adapter board (STEVAL-MKIGIBV2) to render it compatible with
STEVAL-
MKI109V3.
The sensor is soldered precisely in the center of the board and double-sided
adhesives are provided to allow users to conveniently mount the board on equipment
destined for vibration analysis. Alternatively, you can mount the board using the holes
located in each corner of the PCB.
The STEVAL-MKIGIBV2 can be plugged into a standard DIL 24 socket. The kit
provides the complete ISM330DHCX pin-out and comes ready-to-use with the
required decoupling capacitors on the VDD power supply line.
This adapter is supported by the STEVAL-MKI109V3 motherboard with high
performance 32-bit microcontroller functioning as a bridge between the sensor and a
PC, on which it is possible to use the downloadable graphical user interface (Unico
GUI), or dedicated software routines for customized applications.
Product summary
iNemo inertial module
kit based on
ISM330DHCX
STEVAL-
MKI210V1K
3D Accelerometer +
3D Gyro iNEMO
Inertial measurement
ISM330DHCX
unit (IMU) with machine
learning core
ST MEMS adapter
motherboard based
on STM32F401VE
compatible ST MEMS
adapters
Application
STEVAL-
MKI109V3
Internet of
Things
DB4041
-
Rev 2
-
February 2021
For further information contact your local STMicroelectronics sales office.
www.st.com
STEVAL-MKI210V1K
IMPORTANT NOTICE – PLEASE READ CAREFULLY
STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST
products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST
products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement.
Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of
Purchasers’ products.
No license, express or implied, to any intellectual property right is granted by ST herein.
Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product.
ST and the ST logo are trademarks of ST. For additional information about ST trademarks, please refer to
www.st.com/trademarks.
All other product or service
names are the property of their respective owners.
Information in this document supersedes and replaces information previously supplied in any prior versions of this document.
© 2021 STMicroelectronics – All rights reserved
DB4041
-
Rev 2
page 4/4
京公网安备 11010802033920号
Copyright © 2005-2024 EEWORLD.com.cn, Inc. All rights reserved
EEWORLD
