Universal series
Electromechanical relays
Note:
Other versions available on
request
94
94
94
94
94
94
94
94
86
86
86
86
86
Filter series - for disturbances caused by AC leakage currents/long cables
Solid-state relays
Electromechanical relays/solid-state relays
Further information on the products presented
here and on the world of solutions from
Phoenix Contact can be found at
www.phoenixcontact.net/catalog
94
94
94
1
)For
possible configurations, see the
relay and solid-state relay table to the
lower right.
94
80
Terminal width 6.2
PLC-R.../21
Equipped with plug-in power
contact relay
250 V AC/DC
6A
Single contact, 1 PDT
80
Terminal width 6.2
PLC-R.../21AU
Equipped with plug-in relay for
low switching capacities, with
gold-plated multi-layer contact
30 V AC/36 V DC
50 mA
Single contact, 1 PDT
80
Terminal width 14
PLC-R.../21-21
Equipped with plug-in power
contact relay
250 V AC/DC
6A
Single contact, 2 PDTs
80
Terminal width 14
PLC-R.../21-21AU
Equipped with plug-in relay for
low switching capacities, with
gold-plated multi-layer contact
30 V AC/36 V DC
50 mA
Single contact, 2 PDTs
80
Terminal width 14
PLC-R.../21HC
Equipped with plug-in miniature relay for
high continuous current
250 V AC/DC
10 A
Single contact, 1 PDT
80
Terminal width 6.2
PLC-O.../48DC/100
Equipped with plug-in input
solid-state relay
48 V DC
100 mA
80
Terminal width 6.2
PLC-O.../24DC/2
Equipped with plug-in power
solid-state relay
33 V DC
3A
80
Terminal width 6.2
PLC-O.../230AC/1
Equipped with plug-in power
solid-state relay
253 V AC
750 mA
80
Terminal width 6.2
PLC-O.../300DC/1
Integrated solid-state relay with DC
voltage output, max. 1 A
300 V DC
1A
80
Terminal width 6.2
PLC-O.../48DC/500/W
Integrated solid-state relay with
electronic PDT, max. 500 mA
48 V DC
500 mA
80
Terminal width 6.2
PLC-O.../24DC/24DC/10/R
Integrated solid-state relay with
short-circuit-proof DC voltage output,
max. 10 A
33 V DC
10 A
Description
Maximum switching voltage
Limiting continuous current
Contact type
Connection method:
- Screw connection
- Spring-cage connection
- Push-in connection (PT)
Input voltage
80
Terminal width 6.2
PLC-O…/24DC/100KHZ
Integrated solid-state relay with DC
voltage output, max. 50 mA,
transmission frequency up to 100 kHz
24 V DC
50 mA
80
Terminal width 6.2
PLC-O…/24DC/100KHZ-G
Integrated solid-state relay with DC voltage
output with push-pull output stage, max
50 mA, transmission frequency up to 100 kHz
24 V DC
50 mA
80
Terminal width 6.2
PLC-B...UC/21/SO46
1
)
Basic terminal block with integrated filter
which can be equipped with relay or
solid-state relay
80
Terminal width 6.2
PLC-B...UC/1/SEN/SO46
1
)
Basic terminal block with integrated filter
which can be equipped with relay or
solid-state relay
80
Terminal width 14
PLC-BSC...UC/21-21/SO46
1
)
Basic terminal block with integrated filter
which can be equipped with relay
80
Terminal width 14
PLC-BSC...UC/21/HC/SO46
1
)
Basic terminal block with integrated filter
which can be equipped with relay
The technical data depends on the
assembly type (relay)
Modular Terminal Blocks
CLIPLINE 1
The technical data depends on the
The technical data depends on the
The technical data depends on the
assembly type (relay or solid-state relay) assembly type (relay or solid-state relay) assembly type (relay)
Marking Systems, Tools,
and Mounting Material
CLIPLINE 2
Or contact us directly.
2966906
2966171
2966184
2966113
2966139
2966197
2980021
2966207
2967439
2966472
2966485
2966498
2966511
2966524
2900316
2900299
2900300
2900301
2900303
2900304
2966919
2966265
2966278
2966126
2966142
2966281
2980034
2966294
2967442
2966540
2966553
2966566
2966579
2966582
2900317
2900306
2900307
2900308
2900309
2900310
2967235
2967060
2967073
2967248
2967293
2967086
2912497
2912507
2912510
2912523
2912536
2912549
2900329
2900330
2900332
2900333
2900334
2900335
2967277
2967125
2967112
2967280
2967303
2967138
2912565
2912578
2912581
2912594
2912604
2912617
2900337
2900338
2900339
2900340
2900341
2900342
2967617
2967620
2967633
2967646
2967659
2967662
2912264
2912277
2912280
2912293
2912303
2912316
2900290
2900291
2900293
2900294
2900295
2900296
2966728
2966993
2967455
2966744
2980047
2966757
2967549
2967743
2967756
2967552
2900352
2900353
2900354
2900355
2966634
2967002
2967468
2966650
2980050
2966663
2967471
2967727
2967730
2967484
2900364
2900365
2900366
2900367
2967840
2967853
2967866
2967879
2980063
2967882
2967895
2967905
2967918
2967921
2900369
2900370
2900371
2900372
2982210
2980704
2980720
2967934
2900374
2982223
2980869
2980885
2900390
2900387
2900389
2980335
2980377
2900455
2980348
2980380
2900457
2980429
2980445
2980652
2980665
2980678
2980681
2980694
2980717
2980814
2980827
2980830
2980843
2980856
2980872
2900381
2900382
2900383
2900384
2900385
2900388
2902963
2980636
2980649
2900378
2982702
2982715
2900398
2902964
2902969
2902970
2902967
2902968
2902973
2902974
5 V DC
12 V DC
24 V DC
24 V AC/DC
48 V DC
60 V DC
110 V DC
120 V AC
120 V AC/DC
125 V DC
220 V DC
230 V AC
230 V AC/DC
Types with 5 V DC output voltage
available on request
Connection Technology for
Field Devices and Field
Cabling
PLUSCON
2980319
2980351
2900453
2980322
2980364
2900456
2980416
2980432
Device Connection Technology
and Electronic Housings
COMBICON
2966537
2900305
2966647
2900311
2967099
2912552
2900336
2967141
2912620
2900343
2967675
2912329
2900297
2967565
2900356
2967497
2900368
Actuator series
Electromechanical relays
Note:
Other versions available on
request
Solid-state relays
Sensor series
Electromechanical relays
Solid-state relays
Reversing load relays
Solid-state relays
Switch modules
For "manual-0-automatic" mode
Adapters for PLC-INTERFACE
For connection with system cabling
Each PLC-V8 adapter connects eight PLC
modules via the bridge shafts with the
plug-in VARIOFACE system cables. They
are part of Phoenix Contact system
cabling, which you can use to connect
your controller by simply plugging into
the coupling level - quick, easy,
and seamless.
Relays and solid-state relays
For equipping the PLC...SO46 and PLC...TTL/1
basic terminal blocks
PLC-INTERFACE accessories
Description
Power terminal,
for the supply of up
to four potentials
Continuous plug-in bridge,
500 mm
long, insulated, can be cut to length,
for potential distribution with
PLC-INTERFACE
Plug-in bridge,
2-pos., 6 mm long,
bridges potentials of neighboring
PLC-INTERFACES
Plug-in bridge,
2-pos., 8 mm long,
bridges potentials of neighboring
PLC-INTERFACES with partition plate
Plug-in bridge,
2-pos., for connecting
adjacent connections of a 14 mm
PLC-INTERFACE
Partition plate,
2 mm thick, to be
installed at the start and end of every
PLC terminal strip
Passive feed-through bridge,
can be
inserted instead of a relay or solid-state
relay, bridges terminal points A1 and 14
Screwdriver,
for wiring all
PLC-INTERFACES with spring-cage,
screw, and PT connections,
length 180 mm, blade: 0.6 x 3.5 x 100
Color
Gray
Order No.
2966508
Power and Signal Quality
TRABTECH
Basic terminal blocks
PLC-B...UC/21/SO46
Description
Maximum switching voltage
Limiting continuous current
Contact type
Connection method:
- Screw connection
- Spring-cage connection
- Push-in connection (PT)
Input voltage
Terminal width 6.2
PLC-R.../1/ACT
Actuator series equipped with plug-in
power contact relay
250 V AC/DC
6A
Single contact, 1 N/O contact
Terminal width 14
PLC-R-.../1IC/ACT
Actuator series equipped with plug-in
miniature relay for high inrush currents
250 V AC/DC
10 A
Single contact, 1 N/O contact
Terminal width 6.2
PLC-R.../1AU/SEN
Sensor series equipped with plug-in relay
for low switching capacities, with
gold-plated multi-layer contact
30 V AC/36 V DC
50 mA
Single contact, 1 N/O contact
Description
Input voltage
Maximum switching voltage
Maximum switching current
Confirmation
Connection method:
- Screw connection
- Spring-cage connection
- Push-in connection (PT)
Manual operation
PLC-...-S/H
Operation with screwdriver
PLC-...-S/L
33 V DC
3A
253 V DC
750 mA
48 V DC
100 mA
30 V DC
2A
24 V AC/DC
250 V AC/DC
6A
72 V AC/DC/50 mA
-
72 V DC
50 mA
72 V DC/50 mA
5 V DC
24 V DC
48 V DC
120 V AC/DC
230 V AC/DC
2966210
2967345
2900312
2967604
2912413
2900298
2980144
2966676
2980157
2967507
2900375
2900376
2967947
2966317
2966320
2966333
2967374
2967390
2967413
2900313
2900314
2900315
2966773
2966799
2966809
2967578
2967581
2967594
2900358
2900359
2900361
2980539
2980555
2900377
2982236
2834876
2982249
2834889
2900328
2900327
2980733
2980775
2980746
2980788
2900400
2900401
For 6.2 mm PLC-INTERFACE,
with 14-pos. flat-ribbon cable connection,
module width 49.6 mm
Positive switching
OUTPUT PLC-V8/FLK14/OUT
2295554
INPUT PLC-V8/FLK14/IN
2296553
Negative switching
OUTPUT PLC-V8/FLK14/OUT/M
2304102
INPUT PLC-V8/FLK14/IN/M
2304115
For 6.2 mm PLC-INTERFACE,
with 15-pos. D-SUB connection,
module width 49.6 mm
Pin strip
OUTPUT PLC-V8/D15S/OUT
2296058
INPUT PLC-V8/D15S/IN
2296074
Female connector
OUTPUT PLC-V8/D15B/OUT
2296061
INPUT PLC-V8/D15B/IN
2296087
For 14 mm PLC-INTERFACE,
with 14-pos. flat-ribbon cable connection,
module width 112.3 mm
Positive switching
PLC-V8L/FLK14/OUT
2299660
Negative switching
PLC-V8L/FLK14/OUT/M
2304306
PLC-B...UC/1/SEN/SO46
Black
2967691
PLC-BSC...UC/21-21/SO46
PLC-BSC...UC/21/HC/SO46
PLC-B...TTL/1
Black
2966841
Black
2980283
PHOENIX CONTACT GmbH & Co. KG
32823 Blomberg, Germany
Phone: +49/5235/3-00
Fax: +49/5235/3-4 12 00
www.phoenixcontact.com
Black
1204517
MNR 52000826/2012-02-01/04
80
80
80
Terminal width 6.2
PLC-O.../24DC/2/ACT
Equipped with plug-in power
solid-state relay
80
Terminal width 6.2
PLC-OSC.../230AC/1/ACT
Actuator series equipped with plug-in
power solid-state relay
80
80
Terminal width 6.2
PLC-O.../48DC/100/SEN
Sensor series equipped with plug-in
input solid-state relay
80
Terminal width 6.2
PLC-S...-ELR W 1/2-24DC
Electronic reversing load relay for
motors up to 24 V DC/2 A
2
)PLC...H
= 90 mm,
PLC...L = 86 mm
80
Terminal width 6.2
PLC-RS...-24UC/1/S...
Integrated relay and switch, operated
manually or with screwdriver
80
Terminal width 6.2
PLC-S...-S/...
Integrated switch, operated manually or
with screwdriver
Plug-in relays and
solid-state relays
Type
REL-MR-60DC/21AU
REL-MR-60DC/21
OPT-60DC/48DC/100
OPT-60DC/24DC/2
OPT-60DC/230AC/1
Type
REL-MR-60DC/21AU
REL-MR-60DC/21
OPT-60DC/48DC/100
OPT-60DC/24DC/2
OPT-60DC/230AC/1
Type
REL-MR-110DC/21-21AU
REL-MR-110DC/21-21
Type
REL-MR-110DC/21HC
Type
REL-MR-4,5DC/21AU
REL-MR-4,5DC/21
OPT-5DC/48DC/100
OPT-5DC/24DC/2
Order No.
2961134
2961118
2966621
2966605
2967963
Order No.
2961134
2961118
2966621
2966605
2967963
Order No.
2961228
2961202
Order No.
2961338
Order No.
2961370
2961367
2967992
2967989
Red
Blue
Gray
Gray
2966236
2966812
2966825
2967688
Automation Components
and Systems
AUTOMATION
Printed in Germany
90
2
)
90
2
)
94
94
94
94
94
94
86
REL-MR...21
REL-MR-...21-21
OPT...
Red
Blue
Gray
2966786
2966692
2966838
Signal Converters, Switching Devices,
Power Supply Units
INTERFACE
© PHOENIX CONTACT 2012
PLC-INTERFACE
The complete relay system
The PLC-INTERFACE relay system from
Phoenix Contact acts as the
high-performance interface between the
controller and system I/O devices.
PLC-INTERFACE provides you with a
comprehensive range of ultra-narrow,
plug-in relays and solid-state relays, plus a
complete range of accessories. In addition,
PLC sensor/actuator versions, switch
modules, and filter series always provide
the right interface for special applications.
PLC-INTERFACE plus system cabling –
fast plug-in connection of the controller
and I/O devices.
PLC-V8 adapter
PLC-INTERFACE series
SF
BATF
DC5V
FRCE
RUN
RUN-P
STOP
RUN
STOP
MRES
0
1
2
3
4
5
6
7
0
1
2
3
4
5
6
7
Choice of connection methods
Available with screw, spring-cage
or PT connection
Professional marking
With standard marking materials
SF
BATF
DC5V
FRCE
RUN
RUN-P
STOP
RUN
STOP
MRES
0
1
2
3
4
5
6
7
0
1
2
3
4
5
6
7
Relay/solid-state relay
Easy to replace
Controller
with front adapter
LED status indicator
Monitoring at a glance
A1+
A2–
A1+
A2–
A1+
A2–
A1+
A2–
A1+
A2–
A1+
A2–
A1+
A2–
A1+
A2–
11
BB
14
11
BB
14
11
BB
14
11
BB
14
11
BB
14
11
BB
14
11
BB
14
11
BB
14
PLC sensor and
PLC actuator series
• Enormous savings in terms of
time, space, and costs
• All connections for
sensors and actuators directly
on the coupling relay
• No additional modular
terminal blocks for supply
(sensor version) and output
(actuator version)
• Available with screw,
spring-cage or PT connection
(same shape)
• With plug-in relay (white) or
solid-state relay (black)
SF
BATF
DC5V
FRCE
RUN
RUN-P
STOP
RUN
STOP
MRES
0
1
2
3
4
5
6
7
0
1
2
3
4
5
6
7
A1+
A2–
A1+
A2–
A1+
A2–
A1+
A2–
A1+
A2–
A1+
A2–
A1+
A2–
A1+
A2–
11
BB
14
11
BB
14
11
BB
14
11
BB
14
11
BB
14
11
BB
14
11
BB
14
11
BB
14
PLC universal series
• Can be used universally as
input or output interface
• Available with screw,
spring-cage or PT connection
(same shape)
• With plug-in relay (white) or
solid-state relay (black)
• Connection of sensors/
actuators via modular
terminal blocks
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
-X1
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
System cable
PLC relay with
PT connection
Straightforward connection – from
the controller to the I/O devices
Save time and costs with PLC relays and
system cabling compared to error-prone
individual wiring. Use PLC coupling relays
with PT technology for the direct
connection of sensors and actuators by
simply inserting them quickly and easily
without tools. Together with the front
adapters, system cables, and PLC-V8
adapters, your wiring can be seamlessly
plugged in – from the controller through
to the I/O devices.
A1+
A2–
A1+
A2–
A1+
A2–
A1+
A2–
A1+
A2–
A1+
A2–
A1+
A2–
A1+
A2–
PLC-INTERFACE with
push-in terminal
This new spring-cage connection
technology enables easy, direct
connection without tools, even with
smaller conductors from 0.34 mm2. They
are distinguished by a high level of contact
quality and low insertion forces. This
facilitates quick, user-friendly, and secure
wiring. To release the conductor, activate
the release button with a screwdriver or
ballpoint pen.
PLC-INTERFACE accessories - the complete range
1
2
3
4
5
6
Continuous or 2-pos. plug-in bridges
Power terminal
Labeling/marking
Partition plate
Relay and solid-state relay (plug-in)
PLC-V8 adapter for connection with system cabling
5
3
2
4
1
6
11
BB
14
11
BB
14
4
11
BB
1
14
11
BB
14
11
BB
14
11
BB
14
11
BB
14
11
BB
14
Plug-in bridges instead of wiring
Potential distribution saves time.
Continuous bridge also suitable for
mixed 6.2 mm/14 mm PLC structures.
Integrated input circuit and protective circuit
No external wiring required
PLC-INTERFACE series for special applications
•
PLC railway
with extended temperature and input
voltage range plus vibration resistance
•
PLC with integrated filter
for disturbances
caused by AC leakage currents/long cables
•
PLC for high inrush or continuous currents
with lamp loads or electric heating systems
•
PLC-NAMUR
for NAMUR proximity sensors
•
PLC reversing load relay
for switching, reversing,
and braking DC motors
•
PLC switch module
for
MANUAL-0-AUTOMATIC functions
Sensor
PLC-INTERFACE
The complete
relay system
Actuator
You can find more information about system cabling with
PLC-INTERFACE and INTERFACE Cabling in our catalog or at
www.phoenixcontact.com
Compact, space-saving housing
Only 6.2 mm and/or 14 mm wide
PHOENIX CONTACT