ISL28158FHZ-T7

Basic information of ISL28158FHZ-T7 amplifier:

ISL28158FHZ-T7 is an OPERATIONAL AMPLIFIER from Intersil. Commonly used packaging methods are LSSOP, TSOP6,.11,37

ISL28158FHZ-T7 amplifier core information:

The minimum operating temperature of the ISL28158FHZ-T7 is -40 °C and the maximum operating temperature is 125 °C. Its peak reflow temperature is 26000°C. Its maximum bias current at 25°C is: 0.00003 µA. Its maximum average bias current is 0.00008 µA.

How to simply check the efficiency of an amplifier? Looking at its slew rate, the nominal slew rate of ISL28158FHZ-T7 is 0.1 V/us. The maximum slew rate of the ISL28158FHZ-T7 given by the manufacturer is 0.055 mA. Its minimum voltage gain is 75000. When the op amp is used in closed loop, at a certain closed-loop gain (usually 1 or 2, 10, etc.), the frequency when the ISL28158FHZ-T7 gain becomes 0.707 times the low-frequency gain is 200 kHz. The power of ISL28158FHZ-T7 is NO. Its programmable power is NO.

The nominal supply voltage of ISL28158FHZ-T7 is 5 V, and its corresponding nominal negative supply voltage is. The input offset voltage of ISL28158FHZ-T7 is 750 µV (input offset voltage: the compensation voltage added between the two input terminals to make the output terminal of the operational amplifier 0V (or close to 0V).)

Related dimensions of ISL28158FHZ-T7:

The width of ISL28158FHZ-T7 is: 1.6 mm and the length is 2.9 mm. ISL28158FHZ-T7 has 6 terminals. Its terminal position type is: DUAL. Terminal pitch is 0.95 mm. Total pins: 8, 6

ISL28158FHZ-T7 amplifier additional information:

ISL28158FHZ-T7 adopts the VOLTAGE-FEEDBACK architecture. It belongs to the low-bias class of amplifiers. It belongs to the low offset class of amplifiers. The frequency compensation status of ISL28158FHZ-T7 is: YES. Its temperature grade is: AUTOMOTIVE.

And its humidity sensitivity level is: 2. It is a micropower amplifier. The ISL28158FHZ-T7 is not Rohs certified. The corresponding JESD-30 code is: R-PDSO-G6. The corresponding JESD-609 code is: e3.

The packaging code of ISL28158FHZ-T7 is: LSSOP. The materials for the ISL28158FHZ-T7 package are mostly PLASTIC/EPOXY. The package shape is RECTANGULAR. The ISL28158FHZ-T7 package pin forms are: SMALL OUTLINE, LOW PROFILE, SHRINK PITCH. Its terminal forms are: GULL WING.

The maximum seat height is 1.45 mm.