TS27L2CP

Basic information of TS27L2CP amplifier:

TS27L2CP is an OPERATIONAL AMPLIFIER. Commonly used packaging methods are TSSOP, TSSOP8,.25

TS27L2CP amplifier core information:

The minimum operating temperature of TS27L2CP is and the maximum operating temperature is 70 °C. Its peak reflow temperature is NOT SPECIFIED Its maximum average bias current is 0.00015 µA

How to simply check the efficiency of an amplifier? Looking at its slew rate, the TS27L2CP has a nominal slew rate of 0.04 V/us. The maximum slew rate of TS27L2CP given by the manufacturer is 0.034 mA. Its minimum voltage gain is 45000. When the op amp is used in closed loop, at a certain closed-loop gain (usually 1 or 2, 10, etc.), the frequency when the TS27L2CP gain becomes 0.707 times the low-frequency gain is 100 kHz. The power of TS27L2CP is NO. Its programmable power is NO.

The nominal supply voltage of TS27L2CP is 10 V, and its corresponding nominal negative supply voltage is. The input offset voltage of the TS27L2CP is 12000 µV (input offset voltage: the compensation voltage added between the two input terminals to make the output terminal of the operational amplifier 0V (or close to 0V).)

Related dimensions of TS27L2CP:

The width of TS27L2CP is: 3 mm and the length is 4.4 mm. TS27L2CP has 8 terminals. Its terminal position type is: DUAL. Terminal pitch is 0.65 mm. Total pins: 8

TS27L2CP amplifier additional information:

TS27L2CP adopts the VOLTAGE-FEEDBACK architecture. It belongs to the low-bias class of amplifiers. It does not belong to the low offset class of amplifiers. The frequency compensation status of TS27L2CP is: YES. Its temperature grade is: COMMERCIAL.

It is a micropower amplifier. TS27L2CP is not Rohs certified. It contains lead. The corresponding JESD-30 code is: R-PDSO-G8. The corresponding JESD-609 code is: e0.

The packaging code of TS27L2CP is: TSSOP. The materials of TS27L2CP packaging are mostly PLASTIC/EPOXY. The package shape is RECTANGULAR. The TS27L2CP package pin forms are: SMALL OUTLINE, THIN PROFILE, SHRINK PITCH. Its terminal forms are: GULL WING.

The maximum seat height is 1.2 mm.