Part Number | Manufacturer | Description |
---|---|---|
Sorry, there is no alternative parts yet |
MAX4476ATT+ amplifier basic information:
MAX4476ATT+ is an OPERATIONAL AMPLIFIER. Commonly used packaging methods are HVSON, SOLCC6,.11,37
MAX4476ATT+ amplifier core information:
The MAX4476ATT+ operates at a minimum temperature of -40 °C and a maximum operating temperature of 125 °C. Its peak reflow temperature is NOT SPECIFIED Its maximum bias current at 25°C is: 0.00015 µA Its maximum average bias current is 0.00015 µA
How to simply check the efficiency of an amplifier? Looking at its slew rate, the MAX4476ATT+ has a nominal slew rate of 3 V/us. The maximum slew rate of the MAX4476ATT+ given by the manufacturer is 4.4 mA. Its minimum voltage gain is 17780. When the op amp is used in closed loop, at a certain closed-loop gain (usually 1 or 2, 10, etc.), the frequency when the MAX4476ATT+ gain becomes 0.707 times the low-frequency gain is 10000 kHz. The power of the MAX4476ATT+ is NO. Its programmable power is NO.
MAX4476ATT+的标称供电电压为5 V。而其供电电源的范围为:+-1.35/+-2.75/2.7/5.5 V。MAX4476ATT+的输入失调电压为750 µV(输入失调电压:使运算放大器输出端为0V(或接近0V)所需加于两输入端之间的补偿电压。)
MAX4476ATT+的相关尺寸:
MAX4476ATT+的宽度为:3 mm,长度为3 mmMAX4476ATT+拥有6个端子.其端子位置类型为:DUAL。端子节距为0.95 mm。
MAX4476ATT+放大器其他信息:
MAX4476ATT+采用了VOLTAGE-FEEDBACK的架构。其属于低偏置类放大器。其属于低失调类放大器。MAX4476ATT+的频率补偿情况是:YES。其温度等级为:AUTOMOTIVE。
而其湿度敏感等级为:1。其不属于微功率放大器。MAX4476ATT+不符合Rohs认证。其对应的的JESD-30代码为:S-PDSO-N6。其对应的的JESD-609代码为:e3。
MAX4476ATT+的封装代码是:HVSON。MAX4476ATT+封装的材料多为PLASTIC/EPOXY。而其封装形状为SQUARE。MAX4476ATT+封装引脚的形式有:SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE。其端子形式有:NO LEAD。
座面最大高度为0.8 mm。
MAX4476ATT+ Also View
You may also be interested in
Popular Searches
Technical Videos