LT1013CPE4

Basic information of LT1013CPE4 amplifier:

LT1013CPE4 is an OPERATIONAL AMPLIFIER. Commonly used packaging methods are ROHS COMPLIANT, PLASTIC, DIP-8

LT1013CPE4 amplifier core information:

The minimum operating temperature of the LT1013CPE4 is 70 °C. Its peak reflow temperature is NOT SPECIFIED Its maximum average bias current is 0.038 µA

How to simply check the efficiency of an amplifier? Looking at its slew rate, the LT1013CPE4 has a nominal slew rate of 0.4 V/us. When the op amp is used in closed loop, at a certain closed-loop gain (usually 1 or 2, 10, etc.), the frequency when the LT1013CPE4 gain becomes 0.707 times the low-frequency gain is 1000 kHz.

The nominal supply voltage of the LT1013CPE4 is 15 V, and its corresponding nominal negative supply voltage is -15 V. The input offset voltage of the LT1013CPE4 is 400 µV (input offset voltage: the compensation voltage added between the two input terminals to make the op amp output terminal 0V (or close to 0V).)

Related dimensions of LT1013CPE4:

The width of LT1013CPE4 is: 7.62 mm and the length is 9.81 mm. LT1013CPE4 has 8 terminals. Its terminal position type is: DUAL. Terminal pitch is 2.54 mm. Total pins: 8

LT1013CPE4 amplifier additional information:

Its temperature grade is: COMMERCIAL. And its humidity sensitivity level is: NOT APPLICABLE. LT1013CPE4 is not Rohs certified. It does not contain lead. The corresponding JESD-30 code is: R-PDIP-T8.

The corresponding JESD-609 code is: e4. The packaging code of LT1013CPE4 is: DIP. The materials used in the LT1013CPE4 package are mostly PLASTIC/EPOXY. The package shape is RECTANGULAR. The LT1013CPE4 package pin format is: IN-LINE.

Its terminal form is: THROUGH-HOLE. The maximum seat height is 5.08 mm.