Inductive anti-theft alarm circuit using field effect tube
Source: InternetPublisher:石榴姐 Keywords: Field effect transistor induction type anti-theft alarm circuit BSP Updated: 2020/01/13
Inductive anti-theft alarms use human body induction to alarm when the human body is a certain distance away from the induction piece. The circuit of an inductive anti-theft alarm
using a field effect tube is shown in Figure 13-159.
The monostable circuit is composed of 555 time base integrated circuit A and so on .
Adjust potentiometer RP. The sensitivity of the device can be changed. The sensitivity should be as high as possible, but not too high to avoid
false alarms.
The alarm delay time is t-1. lR2 Cz, so the values of Rz and C2 can be adjusted to change it. According to the component parameters shown in the figure,
the alarm delay time is about 40s.
- Build a Bluetooth-controlled wireless scoreboard
- LED Signage with RS232 Port Operation Guide
- Design and production of a practical electronic counting device
- Practical sensitive light-controlled switch circuit diagram
- Use NE555 to make a touch self-extinguishing table lamp
- SC3071 touch step dimming light circuit
- 4-digit incandescent lamp display circuit
- Lighting audio control circuit
- Mains undervoltage and overvoltage protection circuit 2
- SH-803R holiday lights ASIC
- electromagnetic field sensor
- Electronic thermometer circuit
- stuttering correction circuit
- Crop anti-frost circuit
- Chicken supplementary light to increase egg production rate circuit
- Agricultural spraying and insecticide control circuit
- Greenhouse temperature control circuit
- Mixer built with analog multipliers
- OTL low frequency power amplifier circuit
- Differential Amplifier Circuit