OPA234E/250

OPA234E/250 amplifier basic information:

OPA234E/250 is an OPERATIONAL AMPLIFIER. The commonly used packaging method is TSSOP,

OPA234E/250 amplifier core information:

The minimum operating temperature of the OPA234E/250 is -40 °C and the maximum operating temperature is 125 °C. Its peak reflow temperature is 260°C and its maximum average bias current is 0.025 µA

How to simply check the efficiency of an amplifier? Looking at its slew rate, the OPA234E/250 has a nominal slew rate of 0.2 V/us. When the op amp is used in a closed loop, at a specified closed loop gain (usually 1 or 2, 10, etc.), the frequency when the OPA234E/250 gain becomes 0.707 times the low frequency gain is 350 kHz.

The nominal supply voltage of the OPA234E/250 is 15 V, and its corresponding nominal negative supply voltage is -15 V. The input offset voltage of the OPA234E/250 is 250 µV (input offset voltage: the compensation voltage added between the two input terminals to make the output terminal of the operational amplifier 0V (or close to 0V).)

Related dimensions of OPA234E/250:

The width of OPA234E/250 is: 3 mm, and the length is 3 mm. OPA234E/250 has 8 terminals. Its terminal position type is: DUAL. Terminal pitch is 0.65 mm. Total pins: 8

OPA234E/250 amplifier additional information:

Its temperature grade is: AUTOMOTIVE. And its humidity sensitivity level is: 3. OPA234E/250 is not Rohs certified. It does not contain lead. The corresponding JESD-30 code is: S-PDSO-G8.

The corresponding JESD-609 code is: e4. The packaging code of OPA234E/250 is: TSSOP. OPA234E/250 packaging materials are mostly PLASTIC/EPOXY. The package shape is SQUARE. The OPA234E/250 package pin forms are: SMALL OUTLINE, THIN PROFILE, SHRINK PITCH.

Its terminal forms are: GULL WING. The maximum seat height is 1.1 mm.